| Message ID | 20241216223019.70155-10-mailingradian@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add SDM670 camera subsystem | expand |
On 16/12/2024 22:30, Richard Acayan wrote: > As found in the Pixel 3a, the Snapdragon 670 has a camera subsystem with > 3 CSIDs and 3 VFEs (including 1 VFE lite). Add this camera subsystem to > the bindings. > > Adapted from SC8280XP camera subsystem. > > Signed-off-by: Richard Acayan <mailingradian@gmail.com> > --- > .../bindings/media/qcom,sdm670-camss.yaml | 318 ++++++++++++++++++ > 1 file changed, 318 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml > > diff --git a/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml > new file mode 100644 > index 000000000000..f8701a8d27fe > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml > @@ -0,0 +1,318 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm SDM670 Camera Subsystem (CAMSS) > + > +maintainers: > + - Richard Acayan <mailingradian@gmail.com> > + > +description: > + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms. > + > +properties: > + compatible: > + const: qcom,sdm670-camss > + > + reg: > + maxItems: 9 > + > + reg-names: > + items: > + - const: csid0 > + - const: csid1 > + - const: csid2 > + - const: csiphy0 > + - const: csiphy1 > + - const: csiphy2 > + - const: vfe0 > + - const: vfe1 > + - const: vfe_lite > + > + interrupts: > + maxItems: 9 > + > + interrupt-names: > + items: > + - const: csid0 > + - const: csid1 > + - const: csid2 > + - const: csiphy0 > + - const: csiphy1 > + - const: csiphy2 > + - const: vfe0 > + - const: vfe1 > + - const: vfe_lite > + > + clocks: > + maxItems: 22 > + > + clock-names: > + items: > + - const: camnoc_axi > + - const: cpas_ahb > + - const: csi0 > + - const: csi1 > + - const: csi2 > + - const: csiphy0 > + - const: csiphy0_timer > + - const: csiphy1 > + - const: csiphy1_timer > + - const: csiphy2 > + - const: csiphy2_timer > + - const: gcc_camera_ahb > + - const: gcc_camera_axi > + - const: soc_ahb > + - const: vfe0 > + - const: vfe0_axi > + - const: vfe0_cphy_rx > + - const: vfe1 > + - const: vfe1_axi > + - const: vfe1_cphy_rx > + - const: vfe_lite > + - const: vfe_lite_cphy_rx > + > + iommus: > + maxItems: 4 > + > + power-domains: > + items: > + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. > + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. > + - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller. > + > + power-domain-names: > + items: > + - const: ife0 > + - const: ife1 > + - const: top > + > + vdda-phy-supply: > + description: > + Phandle to a regulator supply to PHY core block. > + > + vdda-pll-supply: > + description: > + Phandle to 1.8V regulator supply to PHY refclk pll block. > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + description: > + CSI input ports. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data from CSIPHY0. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - clock-lanes > + - data-lanes > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data from CSIPHY1. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - clock-lanes > + - data-lanes > + > + port@2: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data from CSIPHY2. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - clock-lanes > + - data-lanes > + > +required: > + - compatible > + - reg > + - reg-names > + - interrupts > + - interrupt-names > + - clocks > + - clock-names > + - iommus > + - power-domains > + - power-domain-names > + - vdda-phy-supply > + - vdda-pll-supply > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,camcc-sdm845.h> > + #include <dt-bindings/clock/qcom,gcc-sdm845.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + camera-controller@acb3000 { isp@ > + compatible = "qcom,sdm670-camss"; > + > + reg = <0 0x0acb3000 0 0x1000>, > + <0 0x0acba000 0 0x1000>, > + <0 0x0acc8000 0 0x1000>, > + <0 0x0ac65000 0 0x1000>, > + <0 0x0ac66000 0 0x1000>, > + <0 0x0ac67000 0 0x1000>, > + <0 0x0acaf000 0 0x4000>, > + <0 0x0acb6000 0 0x4000>, > + <0 0x0acc4000 0 0x4000>; > + reg-names = "csid0", > + "csid1", > + "csid2", > + "csiphy0", > + "csiphy1", > + "csiphy2", > + "vfe0", > + "vfe1", > + "vfe_lite"; > + > + interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "csid0", > + "csid1", > + "csid2", > + "csiphy0", > + "csiphy1", > + "csiphy2", > + "vfe0", > + "vfe1", > + "vfe_lite"; > + > + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, > + <&camcc CAM_CC_CPAS_AHB_CLK>, > + <&camcc CAM_CC_IFE_0_CSID_CLK>, > + <&camcc CAM_CC_IFE_1_CSID_CLK>, > + <&camcc CAM_CC_IFE_LITE_CSID_CLK>, > + <&camcc CAM_CC_CSIPHY0_CLK>, > + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, > + <&camcc CAM_CC_CSIPHY1_CLK>, > + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, > + <&camcc CAM_CC_CSIPHY2_CLK>, > + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, > + <&gcc GCC_CAMERA_AHB_CLK>, > + <&gcc GCC_CAMERA_AXI_CLK>, > + <&camcc CAM_CC_SOC_AHB_CLK>, > + <&camcc CAM_CC_IFE_0_CLK>, > + <&camcc CAM_CC_IFE_0_AXI_CLK>, > + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, > + <&camcc CAM_CC_IFE_1_CLK>, > + <&camcc CAM_CC_IFE_1_AXI_CLK>, > + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, > + <&camcc CAM_CC_IFE_LITE_CLK>, > + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>; > + clock-names = "camnoc_axi", > + "cpas_ahb", > + "csi0", > + "csi1", > + "csi2", > + "csiphy0", > + "csiphy0_timer", > + "csiphy1", > + "csiphy1_timer", > + "csiphy2", > + "csiphy2_timer", > + "gcc_camera_ahb", > + "gcc_camera_axi", > + "soc_ahb", > + "vfe0", > + "vfe0_axi", > + "vfe0_cphy_rx", > + "vfe1", > + "vfe1_axi", > + "vfe1_cphy_rx", > + "vfe_lite", > + "vfe_lite_cphy_rx"; > + > + iommus = <&apps_smmu 0x808 0x0>, > + <&apps_smmu 0x810 0x8>, > + <&apps_smmu 0xc08 0x0>, > + <&apps_smmu 0xc10 0x8>; > + > + power-domains = <&camcc IFE_0_GDSC>, > + <&camcc IFE_1_GDSC>, > + <&camcc TITAN_TOP_GDSC>; > + power-domain-names = "ife0", > + "ife1", > + "top"; > + > + vdda-phy-supply = <&vreg_l1a_1p225>; > + vdda-pll-supply = <&vreg_l8a_1p8>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + csiphy_ep0: endpoint { > + clock-lanes = <7>; > + data-lanes = <0 1 2 3>; > + remote-endpoint = <&front_sensor_ep>; > + }; > + }; > + }; > + }; > + }; Otherwise LGTM Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
On Mon, Dec 16, 2024 at 05:30:23PM -0500, Richard Acayan wrote: > As found in the Pixel 3a, the Snapdragon 670 has a camera subsystem with > 3 CSIDs and 3 VFEs (including 1 VFE lite). Add this camera subsystem to > the bindings. > > Adapted from SC8280XP camera subsystem. > > Signed-off-by: Richard Acayan <mailingradian@gmail.com> > --- > .../bindings/media/qcom,sdm670-camss.yaml | 318 ++++++++++++++++++ > 1 file changed, 318 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml new file mode 100644 index 000000000000..f8701a8d27fe --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml @@ -0,0 +1,318 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM670 Camera Subsystem (CAMSS) + +maintainers: + - Richard Acayan <mailingradian@gmail.com> + +description: + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms. + +properties: + compatible: + const: qcom,sdm670-camss + + reg: + maxItems: 9 + + reg-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: vfe0 + - const: vfe1 + - const: vfe_lite + + interrupts: + maxItems: 9 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: vfe0 + - const: vfe1 + - const: vfe_lite + + clocks: + maxItems: 22 + + clock-names: + items: + - const: camnoc_axi + - const: cpas_ahb + - const: csi0 + - const: csi1 + - const: csi2 + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy2 + - const: csiphy2_timer + - const: gcc_camera_ahb + - const: gcc_camera_axi + - const: soc_ahb + - const: vfe0 + - const: vfe0_axi + - const: vfe0_cphy_rx + - const: vfe1 + - const: vfe1_axi + - const: vfe1_cphy_rx + - const: vfe_lite + - const: vfe_lite_cphy_rx + + iommus: + maxItems: 4 + + power-domains: + items: + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. + - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller. + + power-domain-names: + items: + - const: ife0 + - const: ife1 + - const: top + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data from CSIPHY0. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data from CSIPHY1. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data from CSIPHY2. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + - iommus + - power-domains + - power-domain-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,camcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + camera-controller@acb3000 { + compatible = "qcom,sdm670-camss"; + + reg = <0 0x0acb3000 0 0x1000>, + <0 0x0acba000 0 0x1000>, + <0 0x0acc8000 0 0x1000>, + <0 0x0ac65000 0 0x1000>, + <0 0x0ac66000 0 0x1000>, + <0 0x0ac67000 0 0x1000>, + <0 0x0acaf000 0 0x4000>, + <0 0x0acb6000 0 0x4000>, + <0 0x0acc4000 0 0x4000>; + reg-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "vfe0", + "vfe1", + "vfe_lite"; + + interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "vfe0", + "vfe1", + "vfe_lite"; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_IFE_0_CSID_CLK>, + <&camcc CAM_CC_IFE_1_CSID_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_AXI_CLK>, + <&camcc CAM_CC_SOC_AHB_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_AXI_CLK>, + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_AXI_CLK>, + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "csi0", + "csi1", + "csi2", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "gcc_camera_ahb", + "gcc_camera_axi", + "soc_ahb", + "vfe0", + "vfe0_axi", + "vfe0_cphy_rx", + "vfe1", + "vfe1_axi", + "vfe1_cphy_rx", + "vfe_lite", + "vfe_lite_cphy_rx"; + + iommus = <&apps_smmu 0x808 0x0>, + <&apps_smmu 0x810 0x8>, + <&apps_smmu 0xc08 0x0>, + <&apps_smmu 0xc10 0x8>; + + power-domains = <&camcc IFE_0_GDSC>, + <&camcc IFE_1_GDSC>, + <&camcc TITAN_TOP_GDSC>; + power-domain-names = "ife0", + "ife1", + "top"; + + vdda-phy-supply = <&vreg_l1a_1p225>; + vdda-pll-supply = <&vreg_l8a_1p8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csiphy_ep0: endpoint { + clock-lanes = <7>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&front_sensor_ep>; + }; + }; + }; + }; + };
As found in the Pixel 3a, the Snapdragon 670 has a camera subsystem with 3 CSIDs and 3 VFEs (including 1 VFE lite). Add this camera subsystem to the bindings. Adapted from SC8280XP camera subsystem. Signed-off-by: Richard Acayan <mailingradian@gmail.com> --- .../bindings/media/qcom,sdm670-camss.yaml | 318 ++++++++++++++++++ 1 file changed, 318 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml