diff mbox series

[v7,4/4] riscv: dts: add clock generator for Sophgo SG2042 SoC

Message ID 25650372c373b15309cd9f3822306838e556d3c7.1704694903.git.unicorn_wang@outlook.com (mailing list archive)
State Not Applicable, archived
Headers show
Series riscv: sophgo: add clock support for sg2042 | expand

Commit Message

Chen Wang Jan. 8, 2024, 6:49 a.m. UTC 
From: Chen Wang <unicorn_wang@outlook.com>

Add clock generator node to device tree for SG2042, and enable clock for
uart.

Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
---
 .../boot/dts/sophgo/sg2042-milkv-pioneer.dts  |  4 ++++
 arch/riscv/boot/dts/sophgo/sg2042.dtsi        | 23 +++++++++++++++++++
 2 files changed, 27 insertions(+)

Comments

Conor Dooley Jan. 10, 2024, 2:13 p.m. UTC | #1 
On Mon, Jan 08, 2024 at 02:49:53PM +0800, Chen Wang wrote:

> +	cgi: oscillator {
> +		compatible = "fixed-clock";
> +		clock-output-names = "cgi";
> +		#clock-cells = <0>;
> +	};

Where does the name "cgi" come from and what does it mean?
Clock Generator Input? Does the sg2042 documentation call it that?

Cheers,
Conor.
Chen Wang Jan. 11, 2024, 7:55 a.m. UTC | #2 
On 2024/1/10 22:13, Conor Dooley wrote:
> On Mon, Jan 08, 2024 at 02:49:53PM +0800, Chen Wang wrote:
>
>> +	cgi: oscillator {
>> +		compatible = "fixed-clock";
>> +		clock-output-names = "cgi";
>> +		#clock-cells = <0>;
>> +	};
> Where does the name "cgi" come from and what does it mean?
> Clock Generator Input? Does the sg2042 documentation call it that?

It's abbrevation of "Clock Gen IC", I found this in the clock tree 
diagram. 
https://github.com/sophgo/sophgo-doc/blob/main/SG2042/TRM/source/pic/clock-tree.png

BTW, There are three cgi on the diagram. Should I define 3 in DTS too? I 
just found they are the same so I just defined one.

>
> Cheers,
> Conor.
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
index 49b4b9c2c101..0b3b3b2b0c64 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
+++ b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
@@ -14,6 +14,10 @@  chosen {
 	};
 };
 
+&cgi {
+	clock-frequency = <25000000>;
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
index 93256540d078..c9616d111905 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
@@ -5,6 +5,7 @@ 
 
 /dts-v1/;
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/sophgo,sg2042-clkgen.h>
 
 #include "sg2042-cpus.dtsi"
 
@@ -18,6 +19,12 @@  aliases {
 		serial0 = &uart0;
 	};
 
+	cgi: oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "cgi";
+		#clock-cells = <0>;
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -311,12 +318,28 @@  intc: interrupt-controller@7090000000 {
 			riscv,ndev = <224>;
 		};
 
+		sys_ctrl: system-controller@7030010000 {
+			compatible = "sophgo,sg2042-sysctrl";
+			reg = <0x70 0x30010000 0x0 0x1000>;
+		};
+
+		clkgen: clock-controller@7030012000 {
+			compatible = "sophgo,sg2042-clkgen";
+			reg = <0x70 0x30012000 0x0 0x1000>;
+			sophgo,system-ctrl = <&sys_ctrl>;
+			#clock-cells = <1>;
+			clocks = <&cgi>;
+		};
+
 		uart0: serial@7040000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00000070 0x40000000 0x00000000 0x00001000>;
 			interrupt-parent = <&intc>;
 			interrupts = <112 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <500000000>;
+			clocks = <&clkgen GATE_CLK_UART_500M>,
+				 <&clkgen GATE_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";