diff mbox series

[v2,4/4] riscv: dts: add clock generator for Sophgo SG2042 SoC

Message ID 70ad5faa3a4a012df328fa21e69eaffd377e99ca.1701044106.git.unicorn_wang@outlook.com (mailing list archive)
State Not Applicable, archived
Headers show
Series riscv: sophgo: add clock support for sg2042 | expand

Commit Message

Chen Wang Nov. 27, 2023, 1:16 a.m. UTC 
From: Chen Wang <unicorn_wang@outlook.com>

Add clock generator node to device tree for SG2042, and enable clock for
uart.

Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
---
 .../boot/dts/sophgo/sg2042-milkv-pioneer.dts  |  4 +
 arch/riscv/boot/dts/sophgo/sg2042.dtsi        | 77 +++++++++++++++++++
 2 files changed, 81 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
index 49b4b9c2c101..0b3b3b2b0c64 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
+++ b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
@@ -14,6 +14,10 @@  chosen {
 	};
 };
 
+&cgi {
+	clock-frequency = <25000000>;
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
index 93256540d078..c5849a0e74d0 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
@@ -5,6 +5,7 @@ 
 
 /dts-v1/;
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/sophgo-sg2042-clk.h>
 
 #include "sg2042-cpus.dtsi"
 
@@ -18,6 +19,12 @@  aliases {
 		serial0 = &uart0;
 	};
 
+	cgi: oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "cgi";
+		#clock-cells = <0>;
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -311,12 +318,82 @@  intc: interrupt-controller@7090000000 {
 			riscv,ndev = <224>;
 		};
 
+		sys_ctrl: syscon@7030010000 {
+			compatible = "sophgo,sg2042-syscon", "syscon";
+			reg = <0x70 0x30010000 0x0 0x8000>;
+
+			clkgen: clock-controller {
+				compatible = "sophgo,sg2042-clkgen";
+				#clock-cells = <1>;
+				clocks = <&cgi>;
+				assigned-clocks = \
+					<&clkgen DIV_CLK_FPLL_RP_CPU_NORMAL_1>,
+					<&clkgen DIV_CLK_FPLL_50M_A53>,
+					<&clkgen DIV_CLK_FPLL_TOP_RP_CMN_DIV2>,
+					<&clkgen DIV_CLK_FPLL_UART_500M>,
+					<&clkgen DIV_CLK_FPLL_AHB_LPC>,
+					<&clkgen DIV_CLK_FPLL_EFUSE>,
+					<&clkgen DIV_CLK_FPLL_TX_ETH0>,
+					<&clkgen DIV_CLK_FPLL_PTP_REF_I_ETH0>,
+					<&clkgen DIV_CLK_FPLL_REF_ETH0>,
+					<&clkgen DIV_CLK_FPLL_EMMC>,
+					<&clkgen DIV_CLK_FPLL_SD>,
+					<&clkgen DIV_CLK_FPLL_TOP_AXI0>,
+					<&clkgen DIV_CLK_FPLL_TOP_AXI_HSPERI>,
+					<&clkgen DIV_CLK_FPLL_AXI_DDR_1>,
+					<&clkgen DIV_CLK_FPLL_DIV_TIMER1>,
+					<&clkgen DIV_CLK_FPLL_DIV_TIMER2>,
+					<&clkgen DIV_CLK_FPLL_DIV_TIMER3>,
+					<&clkgen DIV_CLK_FPLL_DIV_TIMER4>,
+					<&clkgen DIV_CLK_FPLL_DIV_TIMER5>,
+					<&clkgen DIV_CLK_FPLL_DIV_TIMER6>,
+					<&clkgen DIV_CLK_FPLL_DIV_TIMER7>,
+					<&clkgen DIV_CLK_FPLL_DIV_TIMER8>,
+					<&clkgen DIV_CLK_FPLL_100K_EMMC>,
+					<&clkgen DIV_CLK_FPLL_100K_SD>,
+					<&clkgen DIV_CLK_FPLL_GPIO_DB>,
+					<&clkgen DIV_CLK_MPLL_RP_CPU_NORMAL_0>,
+					<&clkgen DIV_CLK_MPLL_AXI_DDR_0>;
+				assigned-clock-rates = \
+					<2000000000>,
+					<50000000>,
+					<1000000000>,
+					<500000000>,
+					<200000000>,
+					<25000000>,
+					<125000000>,
+					<50000000>,
+					<25000000>,
+					<100000000>,
+					<100000000>,
+					<100000000>,
+					<250000000>,
+					<1000000000>,
+					<50000000>,
+					<50000000>,
+					<50000000>,
+					<50000000>,
+					<50000000>,
+					<50000000>,
+					<50000000>,
+					<50000000>,
+					<100000>,
+					<100000>,
+					<100000>,
+					<2000000000>,
+					<1000000000>;
+			};
+		};
+
 		uart0: serial@7040000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00000070 0x40000000 0x00000000 0x00001000>;
 			interrupt-parent = <&intc>;
 			interrupts = <112 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <500000000>;
+			clocks = <&clkgen GATE_CLK_UART_500M>,
+				 <&clkgen GATE_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";