@@ -66,10 +66,10 @@ config SUPERH
select MODULES_USE_ELF_RELA
select NEED_SG_DMA_LENGTH
select NO_DMA if !MMU && !DMA_COHERENT
- select NO_GENERIC_PCI_IOPORT_MAP if PCI
+ select NO_GENERIC_PCI_IOPORT_MAP if !SH_DEVICE_TREE
select OLD_SIGACTION
select OLD_SIGSUSPEND
- select PCI_DOMAINS if PCI
+ select PCI_DOMAINS if PCI && !SH_DEVICE_TREE
select PERF_EVENTS
select PERF_USE_VMALLOC
select RTC_LIB
@@ -154,7 +154,7 @@ menu "System type"
#
config CPU_SH2
bool
- select SH_INTC
+ select SH_INTC if !SH_DEVICE_TREE
config CPU_SH2A
bool
@@ -180,7 +180,7 @@ config CPU_SH4
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
select CPU_HAS_FPU if !CPU_SH4AL_DSP
- select SH_INTC
+ select SH_INTC if !SH_DEVICE_TREE
select SYS_SUPPORTS_SH_TMU
config CPU_SH4A
@@ -523,6 +523,7 @@ config SH_PCLK_FREQ
config SH_CLK_CPG
def_bool y
+ depends on !COMMON_CLK
config SH_CLK_CPG_LEGACY
depends on SH_CLK_CPG
@@ -667,7 +668,7 @@ config BUILTIN_DTB_SOURCE
kernel.
config ZERO_PAGE_OFFSET
- hex
+ hex "Zero page offset"
default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \
SH_7751_SOLUTION_ENGINE
default "0x00004000" if PAGE_SIZE_16KB || SH_SH03
@@ -5,6 +5,8 @@
obj-y += dma/ platform_early.o
+ifndef CONFIG_SH_DEVICE_TREE
obj-$(CONFIG_PCI) += pci/
+endif
obj-$(CONFIG_PUSH_SWITCH) += push-switch.o
obj-$(CONFIG_HEARTBEAT) += heartbeat.o
@@ -16,6 +16,11 @@ obj-$(CONFIG_ARCH_SHMOBILE) += shmobile/
# Common interfaces.
obj-$(CONFIG_SH_ADC) += adc.o
+ifndef CONFIG_COMMON_CLK
+obj-y += clock.o
obj-$(CONFIG_SH_CLK_CPG_LEGACY) += clock-cpg.o
-
-obj-y += irq/ init.o clock.o fpu.o pfc.o proc.o
+endif
+ifndef CONFIG_GENERIC_IRQ_CHIP
+obj-y += irq/
+endif
+obj-y += init.o fpu.o pfc.o proc.o
@@ -15,6 +15,7 @@ perf-$(CONFIG_CPU_SUBTYPE_SH7750) := perf_event.o
perf-$(CONFIG_CPU_SUBTYPE_SH7750S) := perf_event.o
perf-$(CONFIG_CPU_SUBTYPE_SH7091) := perf_event.o
+ifndef CONFIG_SH_DEVICE_TREE
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o
obj-$(CONFIG_CPU_SUBTYPE_SH7750R) += setup-sh7750.o
@@ -29,5 +30,7 @@ ifndef CONFIG_CPU_SH4A
clock-$(CONFIG_CPU_SH4) := clock-sh4.o
endif
+endif # CONFIG_SH_DEVICE_TREE
+
obj-y += $(clock-y)
obj-$(CONFIG_PERF_EVENTS) += $(perf-y)
IRQ, CLK and PCI will be migrated to a common driver framework. So if OF, disable the SH specific drivers. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> --- arch/sh/Kconfig | 11 ++++++----- arch/sh/drivers/Makefile | 2 ++ arch/sh/kernel/cpu/Makefile | 9 +++++++-- arch/sh/kernel/cpu/sh4/Makefile | 3 +++ 4 files changed, 18 insertions(+), 7 deletions(-)