diff mbox

[2/3] clk: cs2000: tidyup DEVICE_CFG2 settings

Message ID 87r30qxxzb.wl%kuninori.morimoto.gx@renesas.com (mailing list archive)
State Accepted
Delegated to: Stephen Boyd
Headers show

Commit Message

Kuninori Morimoto April 18, 2017, 2:19 a.m. UTC 
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

DEVICE_CFG2 can select ratio from user defined ratio and LOCKCLK is
for it. But current driver sets fixed 0 value. This patch fixes it.
Note is that current cs2000 driver is using/supporting only ratio0
(= ch0) now.

DEVICE_CFG2 can select STATIC/DYNAMIC ratio mode, and current cs2000
driver is selecting STATIC mode, but it was not understandable on
current code. This patch also solve this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 drivers/clk/clk-cs2000-cp.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/clk/clk-cs2000-cp.c b/drivers/clk/clk-cs2000-cp.c
index a8fa6bd..f3ab0ca 100644
--- a/drivers/clk/clk-cs2000-cp.c
+++ b/drivers/clk/clk-cs2000-cp.c
@@ -48,7 +48,9 @@ 
 #define AUTORMOD	(1 << 3)
 #define LOCKCLK(x)	(((x) & 0x3) << 1)
 #define LOCKCLK_MASK	LOCKCLK(0x3)
-#define FRACNSRC	(1 << 0)
+#define FRACNSRC_MASK	(1 << 0)
+#define FRACNSRC_STATIC		(0 << 0)
+#define FRACNSRC_DYNAMIC	(1 << 1)
 
 /* GLOBAL_CFG */
 #define ENDEV2		(0x1)
@@ -267,8 +269,8 @@  static int cs2000_ratio_select(struct cs2000_priv *priv, int ch)
 		return ret;
 
 	ret = cs2000_bset(priv, DEVICE_CFG2,
-			  (AUTORMOD | LOCKCLK_MASK | FRACNSRC),
-			  0);
+			  (AUTORMOD | LOCKCLK_MASK | FRACNSRC_MASK),
+			  (LOCKCLK(ch) | FRACNSRC_STATIC));
 	if (ret < 0)
 		return ret;