[v2,2/2] clk: tegra20: Correct PLL_C_OUT1 setup

Commit Message

Dmitry Osipenko Dec. 19, 2017, 3:59 a.m. UTC

PLL_C_OUT_1 can't produce 216 MHz defined in the init_table. Let's
set it to 240 MHz and explicitly specify HCLK rate for consistency.

Signed-off-by: Dmitry Osipenko <[e-mail]>
Acked-By:  Peter De Schrijver <[e-mail]>
---

Change log:
v2:	No change.

 drivers/clk/tegra/clk-tegra20.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Patch

diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index d143a867968a..06c743988ae2 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -1019,9 +1019,9 @@  static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA20_CLK_PLL_P_OUT3, TEGRA20_CLK_CLK_MAX, 72000000, 0 },
 	{ TEGRA20_CLK_PLL_P_OUT4, TEGRA20_CLK_CLK_MAX, 24000000, 0 },
 	{ TEGRA20_CLK_PLL_C, TEGRA20_CLK_CLK_MAX, 600000000, 0 },
-	{ TEGRA20_CLK_PLL_C_OUT1, TEGRA20_CLK_CLK_MAX, 216000000, 0 },
-	{ TEGRA20_CLK_SCLK, TEGRA20_CLK_PLL_C_OUT1, 0, 0 },
-	{ TEGRA20_CLK_HCLK, TEGRA20_CLK_CLK_MAX, 0, 0 },
+	{ TEGRA20_CLK_PLL_C_OUT1, TEGRA20_CLK_CLK_MAX, 240000000, 0 },
+	{ TEGRA20_CLK_SCLK, TEGRA20_CLK_PLL_C_OUT1, 240000000, 0 },
+	{ TEGRA20_CLK_HCLK, TEGRA20_CLK_CLK_MAX, 240000000, 0 },
 	{ TEGRA20_CLK_PCLK, TEGRA20_CLK_CLK_MAX, 60000000, 0 },
 	{ TEGRA20_CLK_CSITE, TEGRA20_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA20_CLK_CCLK, TEGRA20_CLK_CLK_MAX, 0, 1 },