| Message ID | 8bd0f80a9db9abc7af192d1c7d449887b1392ff7.1526990589.git.stefan@agner.ch (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Hello Stefan, On Tue, 22 May 2018 14:07:05 +0200 Stefan Agner <stefan@agner.ch> wrote: > From: Lucas Stach <dev@lynxeye.de> > > This adds the devicetree binding for the Tegra 2 NAND flash > controller. > > Signed-off-by: Lucas Stach <dev@lynxeye.de> > Signed-off-by: Stefan Agner <stefan@agner.ch> > --- > .../bindings/mtd/nvidia,tegra20-nand.txt | 29 +++++++++++++++++++ > 1 file changed, 29 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/nvidia,tegra20-nand.txt > > diff --git a/Documentation/devicetree/bindings/mtd/nvidia,tegra20-nand.txt b/Documentation/devicetree/bindings/mtd/nvidia,tegra20-nand.txt > new file mode 100644 > index 000000000000..522d442937a9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/nvidia,tegra20-nand.txt > @@ -0,0 +1,29 @@ > +NVIDIA Tegra NAND Flash controller > + > +Required properties: > +- compatible: Must be one of: > + - "nvidia,tegra20-nand" > +- reg: MMIO address range > +- interrupts: interrupt output of the NFC controller > +- clocks: Must contain an entry for each entry in clock-names. > + See ../clocks/clock-bindings.txt for details. > +- clock-names: Must include the following entries: > + - nand > +- resets: Must contain an entry for each entry in reset-names. > + See ../reset/reset.txt for details. > +- reset-names: Must include the following entries: > + - nand > + > +Optional properties: > +- nvidia,wp-gpios: GPIO used to disable write protection of the flash > + > + Example: > + nand@70008000 { > + compatible = "nvidia,tegra20-nand"; > + reg = <0x70008000 0x100>; > + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&tegra_car TEGRA20_CLK_NDFLASH>; > + clock-names = "nand"; > + resets = <&tegra_car 13>; > + reset-names = "nand"; > + }; Can you represent the controller and NAND chip separately as recommended here [1]. Thanks, Boris [1]https://elixir.bootlin.com/linux/v4.17-rc6/source/Documentation/devicetree/bindings/mtd/nand.txt#L56 -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mtd/nvidia,tegra20-nand.txt b/Documentation/devicetree/bindings/mtd/nvidia,tegra20-nand.txt new file mode 100644 index 000000000000..522d442937a9 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/nvidia,tegra20-nand.txt @@ -0,0 +1,29 @@ +NVIDIA Tegra NAND Flash controller + +Required properties: +- compatible: Must be one of: + - "nvidia,tegra20-nand" +- reg: MMIO address range +- interrupts: interrupt output of the NFC controller +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - nand +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - nand + +Optional properties: +- nvidia,wp-gpios: GPIO used to disable write protection of the flash + + Example: + nand@70008000 { + compatible = "nvidia,tegra20-nand"; + reg = <0x70008000 0x100>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_NDFLASH>; + clock-names = "nand"; + resets = <&tegra_car 13>; + reset-names = "nand"; + };