@@ -146,3 +146,17 @@
&cpm_usb3_1 {
status = "okay";
};
+
+&ap_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+};
+
+&cpm_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+};
@@ -148,3 +148,23 @@
&cps_usb3_1 {
status = "okay";
};
+
+&ap_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+};
+
+&cpm_sdhci0 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mmccard: mmccard@0 {
+ compatible = "mmc-card";
+ reg = <0>;
+ };
+
+};
@@ -229,6 +229,17 @@
};
+ ap_sdhci0: sdhci@6e0000 {
+ compatible = "marvell,armada-ap806-sdhci";
+ reg = <0x6e0000 0x300>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core";
+ clocks = <&ap_syscon 4>;
+ dma-coherent;
+ marvell,xenon-phy-slow-mode;
+ status = "disabled";
+ };
+
ap_syscon: system-controller@6f4000 {
compatible = "marvell,ap806-system-controller",
"syscon";
@@ -172,6 +172,17 @@
clocks = <&cpm_syscon0 1 25>;
status = "okay";
};
+
+ cpm_sdhci0: sdhci@780000 {
+ compatible = "marvell,armada-cp110-sdhci";
+ reg = <0x780000 0x300>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core";
+ clocks = <&cpm_syscon0 1 4>;
+ dma-coherent;
+ status = "disabled";
+ };
+
};
cpm_pcie0: pcie@f2600000 {
Also enable it on the Armada 7040 DB and Armada 8040 DB boards. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> --- arch/arm64/boot/dts/marvell/armada-7040-db.dts | 14 +++++++++- arch/arm64/boot/dts/marvell/armada-8040-db.dts | 20 +++++++++++++- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 11 +++++++- arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 11 +++++++- 4 files changed, 56 insertions(+)