| Message ID | 99bae24fdaee0fe101e9ed1f2e55682932b92a74.1527669443.git.matti.vaittinen@fi.rohmeurope.com (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
On Wed, May 30, 2018 at 11:42:55AM +0300, Matti Vaittinen wrote: > Document devicetree bindings for ROHM BD71837 PMIC clock output. Comments from the core binding apply here too. > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > --- > .../bindings/clock/rohm,bd71837-clock.txt | 37 ++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt > > diff --git a/Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt b/Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt > new file mode 100644 > index 000000000000..9759fd145781 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt > @@ -0,0 +1,37 @@ > +ROHM BD71837 Power Management Integrated Circuit clock bindings > + > +BD71837 clock node should be sub node of the BD71837 MFD node. > +See BD71837 MFD bindings at > +Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt > + > +Required properties: > +- compatible : Should be "rohm,bd71837-clk" > +- clock-frequency : Should be 32768 > +- #clock-cells : Should be 0 > + > +Optional properties: > +- clock-output-names : Should contain name for output clock. > + Name "bd71837-32k-out" is used if this is not given. > + > + > +Example: > + > +pmic: bd71837@4b { > + compatible = "rohm,bd71837"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x4b>; > + interrupt-parent = <&gpio1>; > + interrupts = <29 GPIO_ACTIVE_LOW>; > + interrupt-names = "irq"; > + #interrupt-cells = <1>; > + interrupt-controller; > + > + /* Clock node */ > + clk: bd71837-32k-out { > + compatible = "rohm,bd71837-clk"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + clock-output-names = "bd71837-32k-out"; > + }; > +}; > -- > 2.14.3 > -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt b/Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt new file mode 100644 index 000000000000..9759fd145781 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt @@ -0,0 +1,37 @@ +ROHM BD71837 Power Management Integrated Circuit clock bindings + +BD71837 clock node should be sub node of the BD71837 MFD node. +See BD71837 MFD bindings at +Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt + +Required properties: +- compatible : Should be "rohm,bd71837-clk" +- clock-frequency : Should be 32768 +- #clock-cells : Should be 0 + +Optional properties: +- clock-output-names : Should contain name for output clock. + Name "bd71837-32k-out" is used if this is not given. + + +Example: + +pmic: bd71837@4b { + compatible = "rohm,bd71837"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4b>; + interrupt-parent = <&gpio1>; + interrupts = <29 GPIO_ACTIVE_LOW>; + interrupt-names = "irq"; + #interrupt-cells = <1>; + interrupt-controller; + + /* Clock node */ + clk: bd71837-32k-out { + compatible = "rohm,bd71837-clk"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "bd71837-32k-out"; + }; +};
Document devicetree bindings for ROHM BD71837 PMIC clock output. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> --- .../bindings/clock/rohm,bd71837-clock.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt