diff mbox series

[v6,4/4] riscv: dts: sophgo: add uart clock for Sophgo CV1800 series SoC

Message ID IA1PR20MB49537ED3211A94684EA7E9A7BB6D2@IA1PR20MB4953.namprd20.prod.outlook.com (mailing list archive)
State Not Applicable, archived
Headers show
Series riscv: sophgo: add clock support for Sophgo CV1800/SG2000 SoCs | expand

Commit Message

Inochi Amaoto Jan. 14, 2024, 4:17 a.m. UTC 
Add missing clocks of uart node for CV1800B and CV1812H.

Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
---
 arch/riscv/boot/dts/sophgo/cv18xx.dtsi | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

--
2.43.0

Comments

Chen Wang Jan. 31, 2024, 3:46 a.m. UTC | #1 
On 2024/1/14 12:17, Inochi Amaoto wrote:
> Add missing clocks of uart node for CV1800B and CV1812H.
>
> Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
> ---
>   arch/riscv/boot/dts/sophgo/cv18xx.dtsi | 16 +++++++++++-----
>   1 file changed, 11 insertions(+), 5 deletions(-)
>
> diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
> index 6ea1b2784db9..7c88cbe8e91d 100644
> --- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
> @@ -5,6 +5,7 @@
>    */
>
>   #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/clock/sophgo,cv1800.h>
>
>   / {
>   	#address-cells = <1>;
> @@ -135,7 +136,8 @@ uart0: serial@4140000 {
>   			compatible = "snps,dw-apb-uart";
>   			reg = <0x04140000 0x100>;
>   			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&osc>;
> +			clocks = <&clk CLK_UART0>, <&clk CLK_APB_UART0>;
> +			clock-names = "baudclk", "apb_pclk";
>   			reg-shift = <2>;
>   			reg-io-width = <4>;
>   			status = "disabled";
> @@ -145,7 +147,8 @@ uart1: serial@4150000 {
>   			compatible = "snps,dw-apb-uart";
>   			reg = <0x04150000 0x100>;
>   			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&osc>;
> +			clocks = <&clk CLK_UART1>, <&clk CLK_APB_UART1>;
> +			clock-names = "baudclk", "apb_pclk";
>   			reg-shift = <2>;
>   			reg-io-width = <4>;
>   			status = "disabled";
> @@ -155,7 +158,8 @@ uart2: serial@4160000 {
>   			compatible = "snps,dw-apb-uart";
>   			reg = <0x04160000 0x100>;
>   			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&osc>;
> +			clocks = <&clk CLK_UART2>, <&clk CLK_APB_UART2>;
> +			clock-names = "baudclk", "apb_pclk";
>   			reg-shift = <2>;
>   			reg-io-width = <4>;
>   			status = "disabled";
> @@ -165,7 +169,8 @@ uart3: serial@4170000 {
>   			compatible = "snps,dw-apb-uart";
>   			reg = <0x04170000 0x100>;
>   			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&osc>;
> +			clocks = <&clk CLK_UART3>, <&clk CLK_APB_UART3>;
> +			clock-names = "baudclk", "apb_pclk";
>   			reg-shift = <2>;
>   			reg-io-width = <4>;
>   			status = "disabled";
> @@ -175,7 +180,8 @@ uart4: serial@41c0000 {
>   			compatible = "snps,dw-apb-uart";
>   			reg = <0x041c0000 0x100>;
>   			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&osc>;
> +			clocks = <&clk CLK_UART4>, <&clk CLK_APB_UART4>;
> +			clock-names = "baudclk", "apb_pclk";
>   			reg-shift = <2>;
>   			reg-io-width = <4>;
>   			status = "disabled";
> --
> 2.43.0
>
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
index 6ea1b2784db9..7c88cbe8e91d 100644
--- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
@@ -5,6 +5,7 @@ 
  */

 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/sophgo,cv1800.h>

 / {
 	#address-cells = <1>;
@@ -135,7 +136,8 @@  uart0: serial@4140000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04140000 0x100>;
 			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART0>, <&clk CLK_APB_UART0>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -145,7 +147,8 @@  uart1: serial@4150000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04150000 0x100>;
 			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART1>, <&clk CLK_APB_UART1>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -155,7 +158,8 @@  uart2: serial@4160000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04160000 0x100>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART2>, <&clk CLK_APB_UART2>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -165,7 +169,8 @@  uart3: serial@4170000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04170000 0x100>;
 			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART3>, <&clk CLK_APB_UART3>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -175,7 +180,8 @@  uart4: serial@41c0000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x041c0000 0x100>;
 			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART4>, <&clk CLK_APB_UART4>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";