@@ -6,6 +6,7 @@
#include <linux/err.h>
#include <linux/init.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -13,317 +14,254 @@
#include <linux/io-64-nonatomic-lo-hi.h>
#include <dt-bindings/clock/loongson,ls2k-clk.h>
-#define LOONGSON2_PLL_MULT_SHIFT 32
-#define LOONGSON2_PLL_MULT_WIDTH 10
-#define LOONGSON2_PLL_DIV_SHIFT 26
-#define LOONGSON2_PLL_DIV_WIDTH 6
-#define LOONGSON2_APB_FREQSCALE_SHIFT 20
-#define LOONGSON2_APB_FREQSCALE_WIDTH 3
-#define LOONGSON2_USB_FREQSCALE_SHIFT 16
-#define LOONGSON2_USB_FREQSCALE_WIDTH 3
-#define LOONGSON2_SATA_FREQSCALE_SHIFT 12
-#define LOONGSON2_SATA_FREQSCALE_WIDTH 3
-#define LOONGSON2_BOOT_FREQSCALE_SHIFT 8
-#define LOONGSON2_BOOT_FREQSCALE_WIDTH 3
-
-static void __iomem *loongson2_pll_base;
-
static const struct clk_parent_data pdata[] = {
- { .fw_name = "ref_100m",},
+ { .fw_name = "ref_100m", },
};
-static struct clk_hw *loongson2_clk_register(struct device *dev,
- const char *name,
- const char *parent_name,
- const struct clk_ops *ops,
- unsigned long flags)
-{
- int ret;
- struct clk_hw *hw;
- struct clk_init_data init = { };
-
- hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL);
- if (!hw)
- return ERR_PTR(-ENOMEM);
-
- init.name = name;
- init.ops = ops;
- init.flags = flags;
- init.num_parents = 1;
-
- if (!parent_name)
- init.parent_data = pdata;
- else
- init.parent_names = &parent_name;
-
- hw->init = &init;
-
- ret = devm_clk_hw_register(dev, hw);
- if (ret)
- hw = ERR_PTR(ret);
-
- return hw;
-}
-
-static unsigned long loongson2_calc_pll_rate(int offset, unsigned long rate)
-{
- u64 val;
- u32 mult, div;
-
- val = readq(loongson2_pll_base + offset);
-
- mult = (val >> LOONGSON2_PLL_MULT_SHIFT) &
- clk_div_mask(LOONGSON2_PLL_MULT_WIDTH);
- div = (val >> LOONGSON2_PLL_DIV_SHIFT) &
- clk_div_mask(LOONGSON2_PLL_DIV_WIDTH);
-
- return div_u64((u64)rate * mult, div);
-}
-
-static unsigned long loongson2_node_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- return loongson2_calc_pll_rate(0x0, parent_rate);
-}
-
-static const struct clk_ops loongson2_node_clk_ops = {
- .recalc_rate = loongson2_node_recalc_rate,
+enum loongson2_clk_type {
+ CLK_TYPE_PLL,
+ CLK_TYPE_SCALE,
+ CLK_TYPE_DIVIDER,
+ CLK_TYPE_NONE,
};
-static unsigned long loongson2_ddr_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- return loongson2_calc_pll_rate(0x10, parent_rate);
-}
+struct loongson2_clk_provider {
+ void __iomem *base;
+ struct device *dev;
+ struct clk_hw_onecell_data clk_data;
+ spinlock_t clk_lock; /* protect access to DIV registers */
+};
-static const struct clk_ops loongson2_ddr_clk_ops = {
- .recalc_rate = loongson2_ddr_recalc_rate,
+struct loongson2_clk_data {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 div_shift;
+ u8 div_width;
+ u8 mult_shift;
+ u8 mult_width;
};
-static unsigned long loongson2_dc_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- return loongson2_calc_pll_rate(0x20, parent_rate);
-}
+struct loongson2_clk_board_info {
+ u8 id;
+ enum loongson2_clk_type type;
+ const char *name;
+ const char *parent_name;
+ u8 reg_offset;
+ u8 div_shift;
+ u8 div_width;
+ u8 mult_shift;
+ u8 mult_width;
+};
-static const struct clk_ops loongson2_dc_clk_ops = {
- .recalc_rate = loongson2_dc_recalc_rate,
+#define CLK_DIV(_id, _name, _pname, _offset, _dshift, _dwidth) \
+ { \
+ .id = _id, \
+ .type = CLK_TYPE_DIVIDER, \
+ .name = _name, \
+ .parent_name = _pname, \
+ .reg_offset = _offset, \
+ .div_shift = _dshift, \
+ .div_width = _dwidth, \
+ }
+
+#define CLK_PLL(_id, _name, _offset, _mshift, _mwidth, \
+ _dshift, _dwidth) \
+ { \
+ .id = _id, \
+ .type = CLK_TYPE_PLL, \
+ .name = _name, \
+ .parent_name = NULL, \
+ .reg_offset = _offset, \
+ .mult_shift = _mshift, \
+ .mult_width = _mwidth, \
+ .div_shift = _dshift, \
+ .div_width = _dwidth, \
+ }
+
+#define CLK_SCALE(_id, _name, _pname, _offset, \
+ _dshift, _dwidth) \
+ { \
+ .id = _id, \
+ .type = CLK_TYPE_SCALE, \
+ .name = _name, \
+ .parent_name = _pname, \
+ .reg_offset = _offset, \
+ .div_shift = _dshift, \
+ .div_width = _dwidth, \
+ }
+
+static const struct loongson2_clk_board_info ls2k1000_clks[] = {
+ CLK_PLL(LOONGSON2_NODE_PLL, "pll_node", 0, 32, 10, 26, 6),
+ CLK_PLL(LOONGSON2_DDR_PLL, "pll_ddr", 0x10, 32, 10, 26, 6),
+ CLK_PLL(LOONGSON2_DC_PLL, "pll_dc", 0x20, 32, 10, 26, 6),
+ CLK_PLL(LOONGSON2_PIX0_PLL, "pll_pix0", 0x30, 32, 10, 26, 6),
+ CLK_PLL(LOONGSON2_PIX1_PLL, "pll_pix1", 0x40, 32, 10, 26, 6),
+ CLK_DIV(LOONGSON2_NODE_CLK, "clk_node", "pll_node", 0x8, 0, 6),
+ CLK_DIV(LOONGSON2_DDR_CLK, "clk_ddr", "pll_ddr", 0x18, 0, 6),
+ CLK_DIV(LOONGSON2_GPU_CLK, "clk_gpu", "pll_ddr", 0x18, 22, 6),
+ /*
+ * The hda clk divisor in the upper 32bits and the clk-prodiver
+ * layer code doesn't support 64bit io operation thus a conversion
+ * is required that subtract shift by 32 and add 4byte to the hda
+ * address
+ */
+ CLK_DIV(LOONGSON2_HDA_CLK, "clk_hda", "pll_ddr", 0x22, 12, 7),
+ CLK_DIV(LOONGSON2_DC_CLK, "clk_dc", "pll_dc", 0x28, 0, 6),
+ CLK_DIV(LOONGSON2_GMAC_CLK, "clk_gmac", "pll_dc", 0x28, 22, 6),
+ CLK_DIV(LOONGSON2_PIX0_CLK, "clk_pix0", "pll_pix0", 0x38, 0, 6),
+ CLK_DIV(LOONGSON2_PIX1_CLK, "clk_pix1", "pll_pix1", 0x38, 0, 6),
+ CLK_SCALE(LOONGSON2_BOOT_CLK, "clk_boot", NULL, 0x50, 8, 3),
+ CLK_SCALE(LOONGSON2_SATA_CLK, "clk_sata", "clk_gmac", 0x50, 12, 3),
+ CLK_SCALE(LOONGSON2_USB_CLK, "clk_usb", "clk_gmac", 0x50, 16, 3),
+ CLK_SCALE(LOONGSON2_APB_CLK, "clk_apb", "clk_gmac", 0x50, 20, 3),
+ { /* Sentinel */ },
};
-static unsigned long loongson2_pix0_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static inline struct loongson2_clk_data *to_loongson2_clk(struct clk_hw *hw)
{
- return loongson2_calc_pll_rate(0x30, parent_rate);
+ return container_of(hw, struct loongson2_clk_data, hw);
}
-static const struct clk_ops loongson2_pix0_clk_ops = {
- .recalc_rate = loongson2_pix0_recalc_rate,
-};
-
-static unsigned long loongson2_pix1_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static inline unsigned long loongson2_rate_part(u64 val, u8 shift, u8 width)
{
- return loongson2_calc_pll_rate(0x40, parent_rate);
+ return (val & GENMASK(shift + width - 1, shift)) >> shift;
}
-static const struct clk_ops loongson2_pix1_clk_ops = {
- .recalc_rate = loongson2_pix1_recalc_rate,
-};
-
-static unsigned long loongson2_calc_rate(unsigned long rate,
- int shift, int width)
+static unsigned long loongson2_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
- u64 val;
- u32 mult;
-
- val = readq(loongson2_pll_base + 0x50);
+ u64 val, mult, div;
+ struct loongson2_clk_data *clk = to_loongson2_clk(hw);
- mult = (val >> shift) & clk_div_mask(width);
+ val = readq(clk->reg);
+ mult = loongson2_rate_part(val, clk->mult_shift, clk->mult_width);
+ div = loongson2_rate_part(val, clk->div_shift, clk->div_width);
- return div_u64((u64)rate * (mult + 1), 8);
-}
-
-static unsigned long loongson2_boot_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- return loongson2_calc_rate(parent_rate,
- LOONGSON2_BOOT_FREQSCALE_SHIFT,
- LOONGSON2_BOOT_FREQSCALE_WIDTH);
+ return div_u64((u64)parent_rate * mult, div);
}
-static const struct clk_ops loongson2_boot_clk_ops = {
- .recalc_rate = loongson2_boot_recalc_rate,
+static const struct clk_ops loongson2_pll_recalc_ops = {
+ .recalc_rate = loongson2_pll_recalc_rate,
};
-static unsigned long loongson2_apb_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static unsigned long loongson2_freqscale_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
- return loongson2_calc_rate(parent_rate,
- LOONGSON2_APB_FREQSCALE_SHIFT,
- LOONGSON2_APB_FREQSCALE_WIDTH);
-}
+ u64 val, mult;
+ struct loongson2_clk_data *clk = to_loongson2_clk(hw);
-static const struct clk_ops loongson2_apb_clk_ops = {
- .recalc_rate = loongson2_apb_recalc_rate,
-};
+ val = readq(clk->reg);
+ mult = loongson2_rate_part(val, clk->div_shift, clk->div_width) + 1;
-static unsigned long loongson2_usb_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- return loongson2_calc_rate(parent_rate,
- LOONGSON2_USB_FREQSCALE_SHIFT,
- LOONGSON2_USB_FREQSCALE_WIDTH);
+ return div_u64((u64)parent_rate * mult, 8);
}
-static const struct clk_ops loongson2_usb_clk_ops = {
- .recalc_rate = loongson2_usb_recalc_rate,
+static const struct clk_ops loongson2_freqscale_recalc_ops = {
+ .recalc_rate = loongson2_freqscale_recalc_rate,
};
-static unsigned long loongson2_sata_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static struct clk_hw *loongson2_clk_register(struct loongson2_clk_provider *clp,
+ const struct loongson2_clk_board_info *cld,
+ const struct clk_ops *ops)
{
- return loongson2_calc_rate(parent_rate,
- LOONGSON2_SATA_FREQSCALE_SHIFT,
- LOONGSON2_SATA_FREQSCALE_WIDTH);
-}
+ int ret;
+ struct clk_hw *hw;
+ struct loongson2_clk_data *clk;
+ struct clk_init_data init = { };
-static const struct clk_ops loongson2_sata_clk_ops = {
- .recalc_rate = loongson2_sata_recalc_rate,
-};
+ clk = devm_kzalloc(clp->dev, sizeof(*clk), GFP_KERNEL);
+ if (!clk)
+ return ERR_PTR(-ENOMEM);
-static inline int loongson2_check_clk_hws(struct clk_hw *clks[], unsigned int count)
-{
- unsigned int i;
+ init.name = cld->name;
+ init.ops = ops;
+ init.flags = 0;
+ init.num_parents = 1;
- for (i = 0; i < count; i++)
- if (IS_ERR(clks[i])) {
- pr_err("Loongson2 clk %u: register failed with %ld\n",
- i, PTR_ERR(clks[i]));
- return PTR_ERR(clks[i]);
- }
+ if (!cld->parent_name)
+ init.parent_data = pdata;
+ else
+ init.parent_names = &cld->parent_name;
+
+ clk->reg = clp->base + cld->reg_offset;
+ clk->div_shift = cld->div_shift;
+ clk->div_width = cld->div_width;
+ clk->mult_shift = cld->mult_shift;
+ clk->mult_width = cld->mult_width;
+ clk->hw.init = &init;
- return 0;
+ hw = &clk->hw;
+ ret = devm_clk_hw_register(clp->dev, hw);
+ if (ret)
+ clk = ERR_PTR(ret);
+
+ return hw;
}
static int loongson2_clk_probe(struct platform_device *pdev)
{
- int ret;
- struct clk_hw **hws;
- struct clk_hw_onecell_data *clk_hw_data;
- spinlock_t loongson2_clk_lock;
+ int i, clks_num = 0;
+ struct clk_hw *hw;
struct device *dev = &pdev->dev;
+ struct loongson2_clk_provider *clp;
+ const struct loongson2_clk_board_info *p, *data;
- loongson2_pll_base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(loongson2_pll_base))
- return PTR_ERR(loongson2_pll_base);
-
- clk_hw_data = devm_kzalloc(dev, struct_size(clk_hw_data, hws, LOONGSON2_CLK_END),
- GFP_KERNEL);
- if (WARN_ON(!clk_hw_data))
- return -ENOMEM;
-
- clk_hw_data->num = LOONGSON2_CLK_END;
- hws = clk_hw_data->hws;
-
- hws[LOONGSON2_NODE_PLL] = loongson2_clk_register(dev, "node_pll",
- NULL,
- &loongson2_node_clk_ops, 0);
-
- hws[LOONGSON2_DDR_PLL] = loongson2_clk_register(dev, "ddr_pll",
- NULL,
- &loongson2_ddr_clk_ops, 0);
+ data = device_get_match_data(dev);
+ if (!data)
+ return -EINVAL;
- hws[LOONGSON2_DC_PLL] = loongson2_clk_register(dev, "dc_pll",
- NULL,
- &loongson2_dc_clk_ops, 0);
+ for (p = data; p->name; p++)
+ clks_num++;
- hws[LOONGSON2_PIX0_PLL] = loongson2_clk_register(dev, "pix0_pll",
- NULL,
- &loongson2_pix0_clk_ops, 0);
-
- hws[LOONGSON2_PIX1_PLL] = loongson2_clk_register(dev, "pix1_pll",
- NULL,
- &loongson2_pix1_clk_ops, 0);
+ clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num),
+ GFP_KERNEL);
+ if (!clp)
+ return -ENOMEM;
- hws[LOONGSON2_BOOT_CLK] = loongson2_clk_register(dev, "boot",
- NULL,
- &loongson2_boot_clk_ops, 0);
+ clp->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(clp->base))
+ return PTR_ERR(clp->base);
+
+ spin_lock_init(&clp->clk_lock);
+ clp->clk_data.num = clks_num + 1;
+ clp->dev = dev;
+
+ for (i = 0; i < clks_num; i++) {
+ p = &data[i];
+ switch (p->type) {
+ case CLK_TYPE_PLL:
+ hw = loongson2_clk_register(clp, p,
+ &loongson2_pll_recalc_ops);
+ break;
+ case CLK_TYPE_SCALE:
+ hw = loongson2_clk_register(clp, p,
+ &loongson2_freqscale_recalc_ops);
+ break;
+ case CLK_TYPE_DIVIDER:
+ hw = devm_clk_hw_register_divider(dev, p->name,
+ p->parent_name, 0,
+ clp->base + p->reg_offset,
+ p->div_shift, p->div_width,
+ CLK_DIVIDER_ONE_BASED,
+ &clp->clk_lock);
+ break;
+ default:
+ return dev_err_probe(dev, -EINVAL, "Invalid clk type\n");
+ }
- hws[LOONGSON2_NODE_CLK] = devm_clk_hw_register_divider(dev, "node",
- "node_pll", 0,
- loongson2_pll_base + 0x8, 0,
- 6, CLK_DIVIDER_ONE_BASED,
- &loongson2_clk_lock);
+ if (IS_ERR(hw))
+ return dev_err_probe(dev, PTR_ERR(hw),
+ "Register clk: %s, type: %u failed!\n",
+ p->name, p->type);
- /*
- * The hda clk divisor in the upper 32bits and the clk-prodiver
- * layer code doesn't support 64bit io operation thus a conversion
- * is required that subtract shift by 32 and add 4byte to the hda
- * address
- */
- hws[LOONGSON2_HDA_CLK] = devm_clk_hw_register_divider(dev, "hda",
- "ddr_pll", 0,
- loongson2_pll_base + 0x22, 12,
- 7, CLK_DIVIDER_ONE_BASED,
- &loongson2_clk_lock);
-
- hws[LOONGSON2_GPU_CLK] = devm_clk_hw_register_divider(dev, "gpu",
- "ddr_pll", 0,
- loongson2_pll_base + 0x18, 22,
- 6, CLK_DIVIDER_ONE_BASED,
- &loongson2_clk_lock);
-
- hws[LOONGSON2_DDR_CLK] = devm_clk_hw_register_divider(dev, "ddr",
- "ddr_pll", 0,
- loongson2_pll_base + 0x18, 0,
- 6, CLK_DIVIDER_ONE_BASED,
- &loongson2_clk_lock);
-
- hws[LOONGSON2_GMAC_CLK] = devm_clk_hw_register_divider(dev, "gmac",
- "dc_pll", 0,
- loongson2_pll_base + 0x28, 22,
- 6, CLK_DIVIDER_ONE_BASED,
- &loongson2_clk_lock);
-
- hws[LOONGSON2_DC_CLK] = devm_clk_hw_register_divider(dev, "dc",
- "dc_pll", 0,
- loongson2_pll_base + 0x28, 0,
- 6, CLK_DIVIDER_ONE_BASED,
- &loongson2_clk_lock);
-
- hws[LOONGSON2_APB_CLK] = loongson2_clk_register(dev, "apb",
- "gmac",
- &loongson2_apb_clk_ops, 0);
-
- hws[LOONGSON2_USB_CLK] = loongson2_clk_register(dev, "usb",
- "gmac",
- &loongson2_usb_clk_ops, 0);
-
- hws[LOONGSON2_SATA_CLK] = loongson2_clk_register(dev, "sata",
- "gmac",
- &loongson2_sata_clk_ops, 0);
-
- hws[LOONGSON2_PIX0_CLK] = clk_hw_register_divider(NULL, "pix0",
- "pix0_pll", 0,
- loongson2_pll_base + 0x38, 0, 6,
- CLK_DIVIDER_ONE_BASED,
- &loongson2_clk_lock);
-
- hws[LOONGSON2_PIX1_CLK] = clk_hw_register_divider(NULL, "pix1",
- "pix1_pll", 0,
- loongson2_pll_base + 0x48, 0, 6,
- CLK_DIVIDER_ONE_BASED,
- &loongson2_clk_lock);
-
- ret = loongson2_check_clk_hws(hws, LOONGSON2_CLK_END);
- if (ret)
- return ret;
+ clp->clk_data.hws[p->id] = hw;
+ }
- return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_hw_data);
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, &clp->clk_data);
}
static const struct of_device_id loongson2_clk_match_table[] = {
- { .compatible = "loongson,ls2k-clk" },
+ { .compatible = "loongson,ls2k-clk", .data = &ls2k1000_clks },
{ }
};
MODULE_DEVICE_TABLE(of, loongson2_clk_match_table);
@@ -338,4 +276,5 @@ static struct platform_driver loongson2_clk_driver = {
module_platform_driver(loongson2_clk_driver);
MODULE_DESCRIPTION("Loongson2 clock driver");
+MODULE_AUTHOR("Loongson Technology Corporation Limited");
MODULE_LICENSE("GPL");
The driver only supported loongson-2K1000 at first, but the clock structure of loongson-2K0500 and loongson-2K2000 are actually similar, and I tried to refactor the whole driver to adjust to the addition of the new platform. Briefly, I have divided all clocks into three categories according to their properties and their parent clocks: Independent PLLs, clocks based on frequency scales, and clock dividers. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> --- drivers/clk/clk-loongson2.c | 459 ++++++++++++++++-------------------- 1 file changed, 199 insertions(+), 260 deletions(-)