From patchwork Sun Nov 24 10:51:42 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrea della Porta X-Patchwork-Id: 13884058 Received: from mail-ej1-f48.google.com (mail-ej1-f48.google.com [209.85.218.48]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 5079C18C011 for ; Sun, 24 Nov 2024 10:51:27 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.48 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1732445492; cv=none; b=dvbGYGmZM8g4Pzo71/yQa1p6+CU1psMVOl7POWSQfB5k5OdYZWhTOehDbDscohC/JvADDo9Fr/78NIPKfAl1ipsAhFy0kpyfUQoibw2WLXWp+dTuEGZvY3VIDwK33RAP7tF+OaaxPf+LoHBXEZnwt3nkkS7aWF7UKnzdEGTcY1k= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1732445492; c=relaxed/simple; bh=LWi2QP9WpwnvM1RZZzSkISwWREbfEAC7eLjAPEjkvKo=; h=From:To:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=meFhnvYzPW4HdWP4kWz+/gbZfhCnKe4ZnwQsMLlwKwmKpCGHy9WKC1aSR/zowQZC6tbwTbF8uO8gy9gfz6apCq2Xv41Nw5UEzU3PzdnpfKoPcRcAUbPhOIq0cHT9ea4bdxMOtqmVI4+vJnvQo0fs9lp1cz+wFNaK0oaMJGTPXo8= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=suse.com; spf=pass smtp.mailfrom=suse.com; dkim=pass (2048-bit key) header.d=suse.com header.i=@suse.com header.b=Vl3vaFHg; arc=none smtp.client-ip=209.85.218.48 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=suse.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=suse.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=suse.com header.i=@suse.com header.b="Vl3vaFHg" Received: by mail-ej1-f48.google.com with SMTP id a640c23a62f3a-aa5500f7a75so8854566b.0 for ; Sun, 24 Nov 2024 02:51:27 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=suse.com; s=google; t=1732445486; x=1733050286; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:from:to:cc:subject:date:message-id :reply-to; bh=0PvUMMwlyqkE8zrTEeiwTw5LW/D3CY/q899F+06zsw0=; b=Vl3vaFHgG38o1PmPXHwR5ujU94tlxSw5M2EiGS8O8BsNVRHZiUfxcIRWjBGXAiFbnw PGk7cn36qTUbdDYBwLF32DNmIT/amWKxKWpY0LWGW/uvrmCep5ZApjOXsPMQPzi12SUU aBTwuf4sHvf2y86JsjVtC7vkx0F6Dtmp6aR2ATVGzvUyCeIphhi0nL6UaskhaIM8wKa8 Rx23sL/bh/6jZPG2e4mikbKfoNnnu+9LPbtxIxBxo3kGAWuxI/ykO5YdGSL8Hr705ejx nrTX5czWB+CNgeloHHct1BvOgNsXJBjZU3MESiODRSp31Uaae7nlNMueSFzxS8dsHNAY 2j+g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1732445486; x=1733050286; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=0PvUMMwlyqkE8zrTEeiwTw5LW/D3CY/q899F+06zsw0=; b=CR/LaCmM/5FrWZ4xwvs0DfCjVsRVmMudswg6XEEpzJKyTWqdYb0+Xzi3mwJhEuJ9P7 YtoxdAC4L4wxG8G6iZZ/jnTfJXpbtirxbiZCfc917cG1qntpI8a1kYNJO6k7hDYw0q4U kJWkOSa1srPUjaECgZVSJI7oqPKln0qCnG4QblHaZEX6OKnFR+L0Jy7qwTG/BsHrERbW vR5VLFpp9GZq2ZNxB3HrD0Sgl5apv7tI9/5P8fRRMyJZ8vXE1JXMvwYz+jj95qYLlRmj S6J1BNsccSyrza4kgPZu9+0iBmfbb4PouPm7d3jeZH5m7hSxCo8aILFTTFNy3K/TuvJE NLRA== X-Forwarded-Encrypted: i=1; AJvYcCWeioa27iZJbU6su3gEj42QY3ccKf1IsYL0Vv6Gy5IxprMUAqF/xqtrgG00ecXvB2tQhBq+UeaVB1A=@vger.kernel.org X-Gm-Message-State: AOJu0Yz4N4t8+L2TcAZvf0k7lD15ttLhA9hr9jrP3tYcWnKYqw32aDvv QLM7r03KuefuZ3auiaKLuERbtw9G+BqFzYmbkOp0CkbuDkmwMtYW1uGzNnSuq7Q= X-Gm-Gg: ASbGncsPchiesKGxA1SFamMNUWQ56/ekKHwUISB3rEznlYepd1n5o86UXAQXXT6jlrJ TJjME/gP3F9Gxlsmqh0gF1XioR76oZwzTtQlda6KCDH2wVEre2Rl8AyR/5GYBr/bqWwvR9l4isB ZJL3kIK0DCN5LFUd4hRn2jO05Tm/nkyw4rrs6t1ku3YzHNz1684dQU7tPOld7dFdxcz98A+XEoU wu5TeLB15JSfe6WNnvfbyJybfSQy1M0XzVLs9N79wIcgOavL8fAJlvfZCgbW8HlWHJiHbh9PW9b mJ74lTlyh87tf8cTdYIA X-Google-Smtp-Source: AGHT+IFnPogh1wvqvg7MRyC10lNJdXc6LFsqffGtEfiHQ1q91RhMIo7ylKrJfrhMgHNFYOuB0bmqRA== X-Received: by 2002:a17:906:2189:b0:aa5:317b:3a0 with SMTP id a640c23a62f3a-aa5317b066fmr520258166b.57.1732445485449; Sun, 24 Nov 2024 02:51:25 -0800 (PST) Received: from localhost (host-79-49-220-127.retail.telecomitalia.it. [79.49.220.127]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-aa50b2efbf1sm328878966b.44.2024.11.24.02.51.24 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 24 Nov 2024 02:51:24 -0800 (PST) From: Andrea della Porta To: Andrea della Porta , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Florian Fainelli , Broadcom internal kernel review list , Lorenzo Pieralisi , Krzysztof Wilczynski , Manivannan Sadhasivam , Bjorn Helgaas , Linus Walleij , Catalin Marinas , Will Deacon , Bartosz Golaszewski , Derek Kiernan , Dragan Cvetic , Arnd Bergmann , Greg Kroah-Hartman , Saravana Kannan , linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org, linux-gpio@vger.kernel.org, Masahiro Yamada , Stefan Wahren , Herve Codina , Luca Ceresoli , Thomas Petazzoni , Andrew Lunn Subject: [PATCH v4 05/10] clk: rp1: Add support for clocks provided by RP1 Date: Sun, 24 Nov 2024 11:51:42 +0100 Message-ID: X-Mailer: git-send-email 2.44.0 In-Reply-To: References: Precedence: bulk X-Mailing-List: linux-clk@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 RaspberryPi RP1 is an MFD providing, among other peripherals, several clock generators and PLLs that drives the sub-peripherals. Add the driver to support the clock providers. Signed-off-by: Andrea della Porta --- MAINTAINERS | 1 + drivers/clk/Kconfig | 9 + drivers/clk/Makefile | 1 + drivers/clk/clk-rp1.c | 1527 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 1538 insertions(+) create mode 100644 drivers/clk/clk-rp1.c diff --git a/MAINTAINERS b/MAINTAINERS index 2aea5a6166bd..dc064cd4b6b5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19387,6 +19387,7 @@ F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml F: Documentation/devicetree/bindings/misc/pci1de4,1.yaml F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml F: Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml +F: drivers/clk/clk-rp1.c F: include/dt-bindings/clock/rp1.h F: include/dt-bindings/misc/rp1.h diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 299bc678ed1b..7e39033ded1b 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -88,6 +88,15 @@ config COMMON_CLK_RK808 These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each. Clkout1 is always on, Clkout2 can off by control register. +config COMMON_CLK_RP1 + tristate "Raspberry Pi RP1-based clock support" + depends on MISC_RP1 || COMPILE_TEST + default MISC_RP1 + help + Enable common clock framework support for Raspberry Pi RP1. + This multi-function device has 3 main PLLs and several clock + generators to drive the internal sub-peripherals. + config COMMON_CLK_HI655X tristate "Clock driver for Hi655x" if EXPERT depends on (MFD_HI655X_PMIC || COMPILE_TEST) diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index fb8878a5d7d9..2ab97f36c800 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_CLK_LS1028A_PLLDIG) += clk-plldig.o obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o +obj-$(CONFIG_COMMON_CLK_RP1) += clk-rp1.o obj-$(CONFIG_COMMON_CLK_HI655X) += clk-hi655x.o obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o obj-$(CONFIG_COMMON_CLK_SCMI) += clk-scmi.o diff --git a/drivers/clk/clk-rp1.c b/drivers/clk/clk-rp1.c new file mode 100644 index 000000000000..d3789f5f835e --- /dev/null +++ b/drivers/clk/clk-rp1.c @@ -0,0 +1,1527 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Raspberry Pi Ltd. + * + * Clock driver for RP1 PCIe multifunction chip. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define PLL_SYS_OFFSET 0x08000 +#define PLL_SYS_CS (PLL_SYS_OFFSET + 0x00) +#define PLL_SYS_PWR (PLL_SYS_OFFSET + 0x04) +#define PLL_SYS_FBDIV_INT (PLL_SYS_OFFSET + 0x08) +#define PLL_SYS_FBDIV_FRAC (PLL_SYS_OFFSET + 0x0c) +#define PLL_SYS_PRIM (PLL_SYS_OFFSET + 0x10) +#define PLL_SYS_SEC (PLL_SYS_OFFSET + 0x14) + +#define PLL_AUDIO_OFFSET 0x0c000 +#define PLL_AUDIO_CS (PLL_AUDIO_OFFSET + 0x00) +#define PLL_AUDIO_PWR (PLL_AUDIO_OFFSET + 0x04) +#define PLL_AUDIO_FBDIV_INT (PLL_AUDIO_OFFSET + 0x08) +#define PLL_AUDIO_FBDIV_FRAC (PLL_AUDIO_OFFSET + 0x0c) +#define PLL_AUDIO_PRIM (PLL_AUDIO_OFFSET + 0x10) +#define PLL_AUDIO_SEC (PLL_AUDIO_OFFSET + 0x14) +#define PLL_AUDIO_TERN (PLL_AUDIO_OFFSET + 0x18) + +#define PLL_VIDEO_OFFSET 0x10000 +#define PLL_VIDEO_CS (PLL_VIDEO_OFFSET + 0x00) +#define PLL_VIDEO_PWR (PLL_VIDEO_OFFSET + 0x04) +#define PLL_VIDEO_FBDIV_INT (PLL_VIDEO_OFFSET + 0x08) +#define PLL_VIDEO_FBDIV_FRAC (PLL_VIDEO_OFFSET + 0x0c) +#define PLL_VIDEO_PRIM (PLL_VIDEO_OFFSET + 0x10) +#define PLL_VIDEO_SEC (PLL_VIDEO_OFFSET + 0x14) + +#define GPCLK_OE_CTRL 0x00000 + +#define CLK_SYS_OFFSET 0x00014 +#define CLK_SYS_CTRL (CLK_SYS_OFFSET + 0x00) +#define CLK_SYS_DIV_INT (CLK_SYS_OFFSET + 0x04) +#define CLK_SYS_SEL (CLK_SYS_OFFSET + 0x0c) + +#define CLK_SLOW_OFFSET 0x00024 +#define CLK_SLOW_SYS_CTRL (CLK_SLOW_OFFSET + 0x00) +#define CLK_SLOW_SYS_DIV_INT (CLK_SLOW_OFFSET + 0x04) +#define CLK_SLOW_SYS_SEL (CLK_SLOW_OFFSET + 0x0c) + +#define CLK_DMA_OFFSET 0x00044 +#define CLK_DMA_CTRL (CLK_DMA_OFFSET + 0x00) +#define CLK_DMA_DIV_INT (CLK_DMA_OFFSET + 0x04) +#define CLK_DMA_SEL (CLK_DMA_OFFSET + 0x0c) + +#define CLK_UART_OFFSET 0x00054 +#define CLK_UART_CTRL (CLK_UART_OFFSET + 0x00) +#define CLK_UART_DIV_INT (CLK_UART_OFFSET + 0x04) +#define CLK_UART_SEL (CLK_UART_OFFSET + 0x0c) + +#define CLK_ETH_OFFSET 0x00064 +#define CLK_ETH_CTRL (CLK_ETH_OFFSET + 0x00) +#define CLK_ETH_DIV_INT (CLK_ETH_OFFSET + 0x04) +#define CLK_ETH_SEL (CLK_ETH_OFFSET + 0x0c) + +#define CLK_PWM0_OFFSET 0x00074 +#define CLK_PWM0_CTRL (CLK_PWM0_OFFSET + 0x00) +#define CLK_PWM0_DIV_INT (CLK_PWM0_OFFSET + 0x04) +#define CLK_PWM0_DIV_FRAC (CLK_PWM0_OFFSET + 0x08) +#define CLK_PWM0_SEL (CLK_PWM0_OFFSET + 0x0c) + +#define CLK_PWM1_OFFSET 0x00084 +#define CLK_PWM1_CTRL (CLK_PWM1_OFFSET + 0x00) +#define CLK_PWM1_DIV_INT (CLK_PWM1_OFFSET + 0x04) +#define CLK_PWM1_DIV_FRAC (CLK_PWM1_OFFSET + 0x08) +#define CLK_PWM1_SEL (CLK_PWM1_OFFSET + 0x0c) + +#define CLK_AUDIO_IN_OFFSET 0x00094 +#define CLK_AUDIO_IN_CTRL (CLK_AUDIO_IN_OFFSET + 0x00) +#define CLK_AUDIO_IN_DIV_INT (CLK_AUDIO_IN_OFFSET + 0x04) +#define CLK_AUDIO_IN_SEL (CLK_AUDIO_IN_OFFSET + 0x0c) + +#define CLK_AUDIO_OUT_OFFSET 0x000a4 +#define CLK_AUDIO_OUT_CTRL (CLK_AUDIO_OUT_OFFSET + 0x00) +#define CLK_AUDIO_OUT_DIV_INT (CLK_AUDIO_OUT_OFFSET + 0x04) +#define CLK_AUDIO_OUT_SEL (CLK_AUDIO_OUT_OFFSET + 0x0c) + +#define CLK_I2S_OFFSET 0x000b4 +#define CLK_I2S_CTRL (CLK_I2S_OFFSET + 0x00) +#define CLK_I2S_DIV_INT (CLK_I2S_OFFSET + 0x04) +#define CLK_I2S_SEL (CLK_I2S_OFFSET + 0x0c) + +#define CLK_MIPI0_CFG_OFFSET 0x000c4 +#define CLK_MIPI0_CFG_CTRL (CLK_MIPI0_CFG_OFFSET + 0x00) +#define CLK_MIPI0_CFG_DIV_INT (CLK_MIPI0_CFG_OFFSET + 0x04) +#define CLK_MIPI0_CFG_SEL (CLK_MIPI0_CFG_OFFSET + 0x0c) + +#define CLK_MIPI1_CFG_OFFSET 0x000d4 +#define CLK_MIPI1_CFG_CTRL (CLK_MIPI1_CFG_OFFSET + 0x00) +#define CLK_MIPI1_CFG_DIV_INT (CLK_MIPI1_CFG_OFFSET + 0x04) +#define CLK_MIPI1_CFG_SEL (CLK_MIPI1_CFG_OFFSET + 0x0c) + +#define CLK_PCIE_AUX_OFFSET 0x000e4 +#define CLK_PCIE_AUX_CTRL (CLK_PCIE_AUX_OFFSET + 0x00) +#define CLK_PCIE_AUX_DIV_INT (CLK_PCIE_AUX_OFFSET + 0x04) +#define CLK_PCIE_AUX_SEL (CLK_PCIE_AUX_OFFSET + 0x0c) + +#define CLK_USBH0_MICROFRAME_OFFSET 0x000f4 +#define CLK_USBH0_MICROFRAME_CTRL (CLK_USBH0_MICROFRAME_OFFSET + 0x00) +#define CLK_USBH0_MICROFRAME_DIV_INT (CLK_USBH0_MICROFRAME_OFFSET + 0x04) +#define CLK_USBH0_MICROFRAME_SEL (CLK_USBH0_MICROFRAME_OFFSET + 0x0c) + +#define CLK_USBH1_MICROFRAME_OFFSET 0x00104 +#define CLK_USBH1_MICROFRAME_CTRL (CLK_USBH1_MICROFRAME_OFFSET + 0x00) +#define CLK_USBH1_MICROFRAME_DIV_INT (CLK_USBH1_MICROFRAME_OFFSET + 0x04) +#define CLK_USBH1_MICROFRAME_SEL (CLK_USBH1_MICROFRAME_OFFSET + 0x0c) + +#define CLK_USBH0_SUSPEND_OFFSET 0x00114 +#define CLK_USBH0_SUSPEND_CTRL (CLK_USBH0_SUSPEND_OFFSET + 0x00) +#define CLK_USBH0_SUSPEND_DIV_INT (CLK_USBH0_SUSPEND_OFFSET + 0x04) +#define CLK_USBH0_SUSPEND_SEL (CLK_USBH0_SUSPEND_OFFSET + 0x0c) + +#define CLK_USBH1_SUSPEND_OFFSET 0x00124 +#define CLK_USBH1_SUSPEND_CTRL (CLK_USBH1_SUSPEND_OFFSET + 0x00) +#define CLK_USBH1_SUSPEND_DIV_INT (CLK_USBH1_SUSPEND_OFFSET + 0x04) +#define CLK_USBH1_SUSPEND_SEL (CLK_USBH1_SUSPEND_OFFSET + 0x0c) + +#define CLK_ETH_TSU_OFFSET 0x00134 +#define CLK_ETH_TSU_CTRL (CLK_ETH_TSU_OFFSET + 0x00) +#define CLK_ETH_TSU_DIV_INT (CLK_ETH_TSU_OFFSET + 0x04) +#define CLK_ETH_TSU_SEL (CLK_ETH_TSU_OFFSET + 0x0c) + +#define CLK_ADC_OFFSET 0x00144 +#define CLK_ADC_CTRL (CLK_ADC_OFFSET + 0x00) +#define CLK_ADC_DIV_INT (CLK_ADC_OFFSET + 0x04) +#define CLK_ADC_SEL (CLK_ADC_OFFSET + 0x0c) + +#define CLK_SDIO_TIMER_OFFSET 0x00154 +#define CLK_SDIO_TIMER_CTRL (CLK_SDIO_TIMER_OFFSET + 0x00) +#define CLK_SDIO_TIMER_DIV_INT (CLK_SDIO_TIMER_OFFSET + 0x04) +#define CLK_SDIO_TIMER_SEL (CLK_SDIO_TIMER_OFFSET + 0x0c) + +#define CLK_SDIO_ALT_SRC_OFFSET 0x00164 +#define CLK_SDIO_ALT_SRC_CTRL (CLK_SDIO_ALT_SRC_OFFSET + 0x00) +#define CLK_SDIO_ALT_SRC_DIV_INT (CLK_SDIO_ALT_SRC_OFFSET + 0x04) +#define CLK_SDIO_ALT_SRC_SEL (CLK_SDIO_ALT_SRC_OFFSET + 0x0c) + +#define CLK_GP0_OFFSET 0x00174 +#define CLK_GP0_CTRL (CLK_GP0_OFFSET + 0x00) +#define CLK_GP0_DIV_INT (CLK_GP0_OFFSET + 0x04) +#define CLK_GP0_DIV_FRAC (CLK_GP0_OFFSET + 0x08) +#define CLK_GP0_SEL (CLK_GP0_OFFSET + 0x0c) + +#define CLK_GP1_OFFSET 0x00184 +#define CLK_GP1_CTRL (CLK_GP1_OFFSET + 0x00) +#define CLK_GP1_DIV_INT (CLK_GP1_OFFSET + 0x04) +#define CLK_GP1_DIV_FRAC (CLK_GP1_OFFSET + 0x08) +#define CLK_GP1_SEL (CLK_GP1_OFFSET + 0x0c) + +#define CLK_GP2_OFFSET 0x00194 +#define CLK_GP2_CTRL (CLK_GP2_OFFSET + 0x00) +#define CLK_GP2_DIV_INT (CLK_GP2_OFFSET + 0x04) +#define CLK_GP2_DIV_FRAC (CLK_GP2_OFFSET + 0x08) +#define CLK_GP2_SEL (CLK_GP2_OFFSET + 0x0c) + +#define CLK_GP3_OFFSET 0x001a4 +#define CLK_GP3_CTRL (CLK_GP3_OFFSET + 0x00) +#define CLK_GP3_DIV_INT (CLK_GP3_OFFSET + 0x04) +#define CLK_GP3_DIV_FRAC (CLK_GP3_OFFSET + 0x08) +#define CLK_GP3_SEL (CLK_GP3_OFFSET + 0x0c) + +#define CLK_GP4_OFFSET 0x001b4 +#define CLK_GP4_CTRL (CLK_GP4_OFFSET + 0x00) +#define CLK_GP4_DIV_INT (CLK_GP4_OFFSET + 0x04) +#define CLK_GP4_DIV_FRAC (CLK_GP4_OFFSET + 0x08) +#define CLK_GP4_SEL (CLK_GP4_OFFSET + 0x0c) + +#define CLK_GP5_OFFSET 0x001c4 +#define CLK_GP5_CTRL (CLK_GP5_OFFSET + 0x00) +#define CLK_GP5_DIV_INT (CLK_GP5_OFFSET + 0x04) +#define CLK_GP5_DIV_FRAC (CLK_GP5_OFFSET + 0x08) +#define CLK_GP5_SEL (CLK_GP5_OFFSET + 0x0c) + +#define CLK_SYS_RESUS_CTRL 0x0020c + +#define CLK_SLOW_SYS_RESUS_CTRL 0x00214 + +#define FC0_OFFSET 0x0021c +#define FC0_REF_KHZ (FC0_OFFSET + 0x00) +#define FC0_MIN_KHZ (FC0_OFFSET + 0x04) +#define FC0_MAX_KHZ (FC0_OFFSET + 0x08) +#define FC0_DELAY (FC0_OFFSET + 0x0c) +#define FC0_INTERVAL (FC0_OFFSET + 0x10) +#define FC0_SRC (FC0_OFFSET + 0x14) +#define FC0_STATUS (FC0_OFFSET + 0x18) +#define FC0_RESULT (FC0_OFFSET + 0x1c) +#define FC_SIZE 0x20 +#define FC_COUNT 8 +#define FC_NUM(idx, off) ((idx) * 32 + (off)) + +#define AUX_SEL 1 + +#define VIDEO_CLOCKS_OFFSET 0x4000 +#define VIDEO_CLK_VEC_CTRL (VIDEO_CLOCKS_OFFSET + 0x0000) +#define VIDEO_CLK_VEC_DIV_INT (VIDEO_CLOCKS_OFFSET + 0x0004) +#define VIDEO_CLK_VEC_SEL (VIDEO_CLOCKS_OFFSET + 0x000c) +#define VIDEO_CLK_DPI_CTRL (VIDEO_CLOCKS_OFFSET + 0x0010) +#define VIDEO_CLK_DPI_DIV_INT (VIDEO_CLOCKS_OFFSET + 0x0014) +#define VIDEO_CLK_DPI_SEL (VIDEO_CLOCKS_OFFSET + 0x001c) +#define VIDEO_CLK_MIPI0_DPI_CTRL (VIDEO_CLOCKS_OFFSET + 0x0020) +#define VIDEO_CLK_MIPI0_DPI_DIV_INT (VIDEO_CLOCKS_OFFSET + 0x0024) +#define VIDEO_CLK_MIPI0_DPI_DIV_FRAC (VIDEO_CLOCKS_OFFSET + 0x0028) +#define VIDEO_CLK_MIPI0_DPI_SEL (VIDEO_CLOCKS_OFFSET + 0x002c) +#define VIDEO_CLK_MIPI1_DPI_CTRL (VIDEO_CLOCKS_OFFSET + 0x0030) +#define VIDEO_CLK_MIPI1_DPI_DIV_INT (VIDEO_CLOCKS_OFFSET + 0x0034) +#define VIDEO_CLK_MIPI1_DPI_DIV_FRAC (VIDEO_CLOCKS_OFFSET + 0x0038) +#define VIDEO_CLK_MIPI1_DPI_SEL (VIDEO_CLOCKS_OFFSET + 0x003c) + +#define DIV_INT_8BIT_MAX GENMASK(7, 0) /* max divide for most clocks */ +#define DIV_INT_16BIT_MAX GENMASK(15, 0) /* max divide for GPx, PWM */ +#define DIV_INT_24BIT_MAX GENMASK(23, 0) /* max divide for CLK_SYS */ + +#define FC0_STATUS_DONE BIT(4) +#define FC0_STATUS_RUNNING BIT(8) +#define FC0_RESULT_FRAC_SHIFT 5 + +#define PLL_PRIM_DIV1_SHIFT 16 +#define PLL_PRIM_DIV1_WIDTH 3 +#define PLL_PRIM_DIV1_MASK GENMASK(PLL_PRIM_DIV1_SHIFT + \ + PLL_PRIM_DIV1_WIDTH - 1, \ + PLL_PRIM_DIV1_SHIFT) +#define PLL_PRIM_DIV2_SHIFT 12 +#define PLL_PRIM_DIV2_WIDTH 3 +#define PLL_PRIM_DIV2_MASK GENMASK(PLL_PRIM_DIV2_SHIFT + \ + PLL_PRIM_DIV2_WIDTH - 1, \ + PLL_PRIM_DIV2_SHIFT) + +#define PLL_SEC_DIV_SHIFT 8 +#define PLL_SEC_DIV_WIDTH 5 +#define PLL_SEC_DIV_MASK GENMASK(PLL_SEC_DIV_SHIFT + \ + PLL_SEC_DIV_WIDTH - 1, \ + PLL_SEC_DIV_SHIFT) + +#define PLL_CS_LOCK BIT(31) +#define PLL_CS_REFDIV_SHIFT 0 + +#define PLL_PWR_PD BIT(0) +#define PLL_PWR_DACPD BIT(1) +#define PLL_PWR_DSMPD BIT(2) +#define PLL_PWR_POSTDIVPD BIT(3) +#define PLL_PWR_4PHASEPD BIT(4) +#define PLL_PWR_VCOPD BIT(5) +#define PLL_PWR_MASK GENMASK(5, 0) + +#define PLL_SEC_RST BIT(16) +#define PLL_SEC_IMPL BIT(31) + +/* PLL phase output for both PRI and SEC */ +#define PLL_PH_EN BIT(4) +#define PLL_PH_PHASE_SHIFT 0 + +#define RP1_PLL_PHASE_0 0 +#define RP1_PLL_PHASE_90 1 +#define RP1_PLL_PHASE_180 2 +#define RP1_PLL_PHASE_270 3 + +/* Clock fields for all clocks */ +#define CLK_CTRL_ENABLE BIT(11) +#define CLK_CTRL_AUXSRC_SHIFT 5 +#define CLK_CTRL_AUXSRC_WIDTH 5 +#define CLK_CTRL_AUXSRC_MASK GENMASK(CLK_CTRL_AUXSRC_SHIFT + \ + CLK_CTRL_AUXSRC_WIDTH - 1, \ + CLK_CTRL_AUXSRC_SHIFT) +#define CLK_CTRL_SRC_SHIFT 0 +#define CLK_DIV_FRAC_BITS 16 + +#define LOCK_TIMEOUT_US 100000 +#define LOCK_POLL_DELAY_US 5 + +#define MAX_CLK_PARENTS 16 + +/* + * Secondary PLL channel output divider table. + * Divider values range from 8 to 19. + * Invalid values default to 19 + */ +static const struct clk_div_table pll_sec_div_table[] = { + { 0x00, 19 }, + { 0x01, 19 }, + { 0x02, 19 }, + { 0x03, 19 }, + { 0x04, 19 }, + { 0x05, 19 }, + { 0x06, 19 }, + { 0x07, 19 }, + { 0x08, 8 }, + { 0x09, 9 }, + { 0x0a, 10 }, + { 0x0b, 11 }, + { 0x0c, 12 }, + { 0x0d, 13 }, + { 0x0e, 14 }, + { 0x0f, 15 }, + { 0x10, 16 }, + { 0x11, 17 }, + { 0x12, 18 }, + { 0x13, 19 }, + { 0x14, 19 }, + { 0x15, 19 }, + { 0x16, 19 }, + { 0x17, 19 }, + { 0x18, 19 }, + { 0x19, 19 }, + { 0x1a, 19 }, + { 0x1b, 19 }, + { 0x1c, 19 }, + { 0x1d, 19 }, + { 0x1e, 19 }, + { 0x1f, 19 }, + { 0 } +}; + +struct rp1_clockman { + struct device *dev; + void __iomem *regs; + struct regmap *regmap; + spinlock_t regs_lock; /* spinlock for all clocks */ + + /* Must be last */ + struct clk_hw_onecell_data onecell; +}; + +struct rp1_pll_core_data { + u32 cs_reg; + u32 pwr_reg; + u32 fbdiv_int_reg; + u32 fbdiv_frac_reg; + u32 fc0_src; +}; + +struct rp1_pll_data { + u32 ctrl_reg; + u32 fc0_src; +}; + +struct rp1_pll_ph_data { + unsigned int phase; + unsigned int fixed_divider; + u32 ph_reg; + u32 fc0_src; +}; + +struct rp1_pll_divider_data { + u32 sec_reg; + u32 fc0_src; +}; + +struct rp1_clock_data { + int num_std_parents; + int num_aux_parents; + u32 oe_mask; + u32 clk_src_mask; + u32 ctrl_reg; + u32 div_int_reg; + u32 div_frac_reg; + u32 sel_reg; + u32 div_int_max; + unsigned long max_freq; + u32 fc0_src; +}; + +struct rp1_clk_desc { + struct clk_hw *(*clk_register)(struct rp1_clockman *clockman, + struct rp1_clk_desc *desc); + const void *data; + struct clk_hw hw; + struct rp1_clockman *clockman; + unsigned long cached_rate; + struct clk_divider div; +}; + +static inline +void clockman_write(struct rp1_clockman *clockman, u32 reg, u32 val) +{ + regmap_write(clockman->regmap, reg, val); +} + +static inline u32 clockman_read(struct rp1_clockman *clockman, u32 reg) +{ + u32 val; + + regmap_read(clockman->regmap, reg, &val); + + return val; +} + +static int rp1_pll_core_is_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *pll_core = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_core->clockman; + const struct rp1_pll_core_data *data = pll_core->data; + + u32 pwr = clockman_read(clockman, data->pwr_reg); + + return (pwr & PLL_PWR_PD) || (pwr & PLL_PWR_POSTDIVPD); +} + +static int rp1_pll_core_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *pll_core = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_core->clockman; + const struct rp1_pll_core_data *data = pll_core->data; + + u32 fbdiv_frac, val; + int ret; + + spin_lock(&clockman->regs_lock); + + if (!(clockman_read(clockman, data->cs_reg) & PLL_CS_LOCK)) { + /* Reset to a known state. */ + clockman_write(clockman, data->pwr_reg, PLL_PWR_MASK); + clockman_write(clockman, data->fbdiv_int_reg, 20); + clockman_write(clockman, data->fbdiv_frac_reg, 0); + clockman_write(clockman, data->cs_reg, 1 << PLL_CS_REFDIV_SHIFT); + } + + /* Come out of reset. */ + fbdiv_frac = clockman_read(clockman, data->fbdiv_frac_reg); + clockman_write(clockman, data->pwr_reg, fbdiv_frac ? 0 : PLL_PWR_DSMPD); + spin_unlock(&clockman->regs_lock); + + /* Wait for the PLL to lock. */ + ret = regmap_read_poll_timeout(clockman->regmap, data->cs_reg, val, + val & PLL_CS_LOCK, + LOCK_POLL_DELAY_US, LOCK_TIMEOUT_US); + if (ret) + dev_err(clockman->dev, "%s: can't lock PLL\n", + clk_hw_get_name(hw)); + + return ret; +} + +static void rp1_pll_core_off(struct clk_hw *hw) +{ + struct rp1_clk_desc *pll_core = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_core->clockman; + const struct rp1_pll_core_data *data = pll_core->data; + + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->pwr_reg, 0); + spin_unlock(&clockman->regs_lock); +} + +static inline unsigned long get_pll_core_divider(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, + u32 *div_int, u32 *div_frac) +{ + u32 fbdiv_int, fbdiv_frac; + unsigned long calc_rate; + u64 shifted_fbdiv_int; + u64 div_fp64; /* 32.32 fixed point fraction. */ + + /* Factor of reference clock to VCO frequency. */ + div_fp64 = (u64)(rate) << 32; + div_fp64 = DIV_ROUND_CLOSEST_ULL(div_fp64, parent_rate); + + /* Round the fractional component at 24 bits. */ + div_fp64 += 1 << (32 - 24 - 1); + + fbdiv_int = div_fp64 >> 32; + fbdiv_frac = (div_fp64 >> (32 - 24)) & 0xffffff; + + shifted_fbdiv_int = (u64)fbdiv_int << 24; + calc_rate = (u64)parent_rate * (shifted_fbdiv_int + fbdiv_frac); + calc_rate += BIT(23); + calc_rate >>= 24; + + *div_int = fbdiv_int; + *div_frac = fbdiv_frac; + + return calc_rate; +} + +static int rp1_pll_core_set_rate(struct clk_hw *hw, + unsigned long rate, unsigned long parent_rate) +{ + struct rp1_clk_desc *pll_core = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_core->clockman; + const struct rp1_pll_core_data *data = pll_core->data; + + unsigned long calc_rate; + u32 fbdiv_int, fbdiv_frac; + + /* Disable dividers to start with. */ + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->fbdiv_int_reg, 0); + clockman_write(clockman, data->fbdiv_frac_reg, 0); + spin_unlock(&clockman->regs_lock); + + calc_rate = get_pll_core_divider(hw, rate, parent_rate, + &fbdiv_int, &fbdiv_frac); + + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->pwr_reg, fbdiv_frac ? 0 : PLL_PWR_DSMPD); + clockman_write(clockman, data->fbdiv_int_reg, fbdiv_int); + clockman_write(clockman, data->fbdiv_frac_reg, fbdiv_frac); + spin_unlock(&clockman->regs_lock); + + /* Check that reference frequency is no greater than VCO / 16. */ + if (WARN_ON_ONCE(parent_rate > (rate / 16))) + return -ERANGE; + + pll_core->cached_rate = calc_rate; + + spin_lock(&clockman->regs_lock); + /* Don't need to divide ref unless parent_rate > (output freq / 16) */ + clockman_write(clockman, data->cs_reg, + clockman_read(clockman, data->cs_reg) | + (1 << PLL_CS_REFDIV_SHIFT)); + spin_unlock(&clockman->regs_lock); + + return 0; +} + +static unsigned long rp1_pll_core_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct rp1_clk_desc *pll_core = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_core->clockman; + const struct rp1_pll_core_data *data = pll_core->data; + + u32 fbdiv_int, fbdiv_frac; + unsigned long calc_rate; + u64 shifted_fbdiv_int; + + fbdiv_int = clockman_read(clockman, data->fbdiv_int_reg); + fbdiv_frac = clockman_read(clockman, data->fbdiv_frac_reg); + + shifted_fbdiv_int = (u64)fbdiv_int << 24; + calc_rate = (u64)parent_rate * (shifted_fbdiv_int + fbdiv_frac); + calc_rate += BIT(23); + calc_rate >>= 24; + + return calc_rate; +} + +static long rp1_pll_core_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + u32 fbdiv_int, fbdiv_frac; + + return get_pll_core_divider(hw, rate, *parent_rate, + &fbdiv_int, &fbdiv_frac); +} + +static void get_pll_prim_dividers(unsigned long rate, unsigned long parent_rate, + u32 *divider1, u32 *divider2) +{ + unsigned int div1, div2; + unsigned int best_div1 = 7, best_div2 = 7; + unsigned long best_rate_diff = + abs_diff(DIV_ROUND_CLOSEST(parent_rate, best_div1 * best_div2), rate); + unsigned long rate_diff, calc_rate; + + for (div1 = 1; div1 <= 7; div1++) { + for (div2 = 1; div2 <= div1; div2++) { + calc_rate = DIV_ROUND_CLOSEST(parent_rate, div1 * div2); + rate_diff = abs_diff(calc_rate, rate); + + if (calc_rate == rate) { + best_div1 = div1; + best_div2 = div2; + goto done; + } else if (rate_diff < best_rate_diff) { + best_div1 = div1; + best_div2 = div2; + best_rate_diff = rate_diff; + } + } + } + +done: + *divider1 = best_div1; + *divider2 = best_div2; +} + +static int rp1_pll_set_rate(struct clk_hw *hw, + unsigned long rate, unsigned long parent_rate) +{ + struct rp1_clk_desc *pll = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll->clockman; + const struct rp1_pll_data *data = pll->data; + + u32 prim, prim_div1, prim_div2; + + get_pll_prim_dividers(rate, parent_rate, &prim_div1, &prim_div2); + + spin_lock(&clockman->regs_lock); + prim = clockman_read(clockman, data->ctrl_reg); + prim &= ~PLL_PRIM_DIV1_MASK; + prim |= FIELD_PREP(PLL_PRIM_DIV1_MASK, prim_div1); + prim &= ~PLL_PRIM_DIV2_MASK; + prim |= FIELD_PREP(PLL_PRIM_DIV2_MASK, prim_div2); + clockman_write(clockman, data->ctrl_reg, prim); + spin_unlock(&clockman->regs_lock); + + return 0; +} + +static unsigned long rp1_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct rp1_clk_desc *pll = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll->clockman; + const struct rp1_pll_data *data = pll->data; + u32 prim, prim_div1, prim_div2; + + prim = clockman_read(clockman, data->ctrl_reg); + prim_div1 = (prim & PLL_PRIM_DIV1_MASK) >> PLL_PRIM_DIV1_SHIFT; + prim_div2 = (prim & PLL_PRIM_DIV2_MASK) >> PLL_PRIM_DIV2_SHIFT; + + if (!prim_div1 || !prim_div2) { + dev_err(clockman->dev, "%s: (%s) zero divider value\n", + __func__, clk_hw_get_name(hw)); + return 0; + } + + return DIV_ROUND_CLOSEST(parent_rate, prim_div1 * prim_div2); +} + +static long rp1_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + u32 div1, div2; + + get_pll_prim_dividers(rate, *parent_rate, &div1, &div2); + + return DIV_ROUND_CLOSEST(*parent_rate, div1 * div2); +} + +static int rp1_pll_ph_is_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *pll_ph = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_ph->clockman; + const struct rp1_pll_ph_data *data = pll_ph->data; + + return !!(clockman_read(clockman, data->ph_reg) & PLL_PH_EN); +} + +static int rp1_pll_ph_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *pll_ph = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_ph->clockman; + const struct rp1_pll_ph_data *data = pll_ph->data; + u32 ph_reg; + + /* TODO: ensure pri/sec is enabled! */ + spin_lock(&clockman->regs_lock); + ph_reg = clockman_read(clockman, data->ph_reg); + ph_reg |= data->phase << PLL_PH_PHASE_SHIFT; + ph_reg |= PLL_PH_EN; + clockman_write(clockman, data->ph_reg, ph_reg); + spin_unlock(&clockman->regs_lock); + + return 0; +} + +static void rp1_pll_ph_off(struct clk_hw *hw) +{ + struct rp1_clk_desc *pll_ph = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_ph->clockman; + const struct rp1_pll_ph_data *data = pll_ph->data; + + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->ph_reg, + clockman_read(clockman, data->ph_reg) & ~PLL_PH_EN); + spin_unlock(&clockman->regs_lock); +} + +static unsigned long rp1_pll_ph_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct rp1_clk_desc *pll_ph = container_of(hw, struct rp1_clk_desc, hw); + const struct rp1_pll_ph_data *data = pll_ph->data; + + return parent_rate / data->fixed_divider; +} + +static long rp1_pll_ph_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct rp1_clk_desc *pll_ph = container_of(hw, struct rp1_clk_desc, hw); + const struct rp1_pll_ph_data *data = pll_ph->data; + + return *parent_rate / data->fixed_divider; +} + +static int rp1_pll_divider_is_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *divider = container_of(hw, struct rp1_clk_desc, div.hw); + struct rp1_clockman *clockman = divider->clockman; + const struct rp1_pll_data *data = divider->data; + + return !(clockman_read(clockman, data->ctrl_reg) & PLL_SEC_RST); +} + +static int rp1_pll_divider_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *divider = container_of(hw, struct rp1_clk_desc, div.hw); + struct rp1_clockman *clockman = divider->clockman; + const struct rp1_pll_data *data = divider->data; + + spin_lock(&clockman->regs_lock); + /* Check the implementation bit is set! */ + WARN_ON(!(clockman_read(clockman, data->ctrl_reg) & PLL_SEC_IMPL)); + clockman_write(clockman, data->ctrl_reg, + clockman_read(clockman, data->ctrl_reg) & ~PLL_SEC_RST); + spin_unlock(&clockman->regs_lock); + + return 0; +} + +static void rp1_pll_divider_off(struct clk_hw *hw) +{ + struct rp1_clk_desc *divider = container_of(hw, struct rp1_clk_desc, div.hw); + struct rp1_clockman *clockman = divider->clockman; + const struct rp1_pll_data *data = divider->data; + + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->ctrl_reg, + clockman_read(clockman, data->ctrl_reg) | PLL_SEC_RST); + spin_unlock(&clockman->regs_lock); +} + +static int rp1_pll_divider_set_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate) +{ + struct rp1_clk_desc *divider = container_of(hw, struct rp1_clk_desc, div.hw); + struct rp1_clockman *clockman = divider->clockman; + const struct rp1_pll_data *data = divider->data; + u32 div, sec; + + div = DIV_ROUND_UP_ULL(parent_rate, rate); + div = clamp(div, 8u, 19u); + + spin_lock(&clockman->regs_lock); + sec = clockman_read(clockman, data->ctrl_reg); + sec &= ~PLL_SEC_DIV_MASK; + sec |= FIELD_PREP(PLL_SEC_DIV_MASK, div); + + /* Must keep the divider in reset to change the value. */ + sec |= PLL_SEC_RST; + clockman_write(clockman, data->ctrl_reg, sec); + + /* TODO: must sleep 10 pll vco cycles */ + sec &= ~PLL_SEC_RST; + clockman_write(clockman, data->ctrl_reg, sec); + spin_unlock(&clockman->regs_lock); + + return 0; +} + +static unsigned long rp1_pll_divider_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return clk_divider_ops.recalc_rate(hw, parent_rate); +} + +static long rp1_pll_divider_round_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long *parent_rate) +{ + return clk_divider_ops.round_rate(hw, rate, parent_rate); +} + +static int rp1_clock_is_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + + return !!(clockman_read(clockman, data->ctrl_reg) & CLK_CTRL_ENABLE); +} + +static unsigned long rp1_clock_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + u64 calc_rate; + u64 div; + + u32 frac; + + div = clockman_read(clockman, data->div_int_reg); + frac = (data->div_frac_reg != 0) ? + clockman_read(clockman, data->div_frac_reg) : 0; + + /* If the integer portion of the divider is 0, treat it as 2^16 */ + if (!div) + div = 1 << 16; + + div = (div << CLK_DIV_FRAC_BITS) | (frac >> (32 - CLK_DIV_FRAC_BITS)); + + calc_rate = (u64)parent_rate << CLK_DIV_FRAC_BITS; + calc_rate = div64_u64(calc_rate, div); + + return calc_rate; +} + +static int rp1_clock_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->ctrl_reg, + clockman_read(clockman, data->ctrl_reg) | CLK_CTRL_ENABLE); + /* If this is a GPCLK, turn on the output-enable */ + if (data->oe_mask) + clockman_write(clockman, GPCLK_OE_CTRL, + clockman_read(clockman, GPCLK_OE_CTRL) | data->oe_mask); + spin_unlock(&clockman->regs_lock); + + return 0; +} + +static void rp1_clock_off(struct clk_hw *hw) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->ctrl_reg, + clockman_read(clockman, data->ctrl_reg) & ~CLK_CTRL_ENABLE); + /* If this is a GPCLK, turn off the output-enable */ + if (data->oe_mask) + clockman_write(clockman, GPCLK_OE_CTRL, + clockman_read(clockman, GPCLK_OE_CTRL) & ~data->oe_mask); + spin_unlock(&clockman->regs_lock); +} + +static u32 rp1_clock_choose_div(unsigned long rate, unsigned long parent_rate, + const struct rp1_clock_data *data) +{ + u64 div; + + /* + * Due to earlier rounding, calculated parent_rate may differ from + * expected value. Don't fail on a small discrepancy near unity divide. + */ + if (!rate || rate > parent_rate + (parent_rate >> CLK_DIV_FRAC_BITS)) + return 0; + + /* + * Always express div in fixed-point format for fractional division; + * If no fractional divider is present, the fraction part will be zero. + */ + if (data->div_frac_reg) { + div = (u64)parent_rate << CLK_DIV_FRAC_BITS; + div = DIV_ROUND_CLOSEST_ULL(div, rate); + } else { + div = DIV_ROUND_CLOSEST_ULL(parent_rate, rate); + div <<= CLK_DIV_FRAC_BITS; + } + + div = clamp(div, + 1ull << CLK_DIV_FRAC_BITS, + (u64)data->div_int_max << CLK_DIV_FRAC_BITS); + + return div; +} + +static u8 rp1_clock_get_parent(struct clk_hw *hw) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + u32 sel, ctrl; + u8 parent; + + /* Sel is one-hot, so find the first bit set */ + sel = clockman_read(clockman, data->sel_reg); + parent = ffs(sel) - 1; + + /* sel == 0 implies the parent clock is not enabled yet. */ + if (!sel) { + /* Read the clock src from the CTRL register instead */ + ctrl = clockman_read(clockman, data->ctrl_reg); + parent = (ctrl & data->clk_src_mask) >> CLK_CTRL_SRC_SHIFT; + } + + if (parent >= data->num_std_parents) + parent = AUX_SEL; + + if (parent == AUX_SEL) { + /* + * Clock parent is an auxiliary source, so get the parent from + * the AUXSRC register field. + */ + ctrl = clockman_read(clockman, data->ctrl_reg); + parent = (ctrl & CLK_CTRL_AUXSRC_MASK) >> CLK_CTRL_AUXSRC_SHIFT; + parent += data->num_std_parents; + } + + return parent; +} + +static int rp1_clock_set_parent(struct clk_hw *hw, u8 index) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + u32 ctrl, sel; + + spin_lock(&clockman->regs_lock); + ctrl = clockman_read(clockman, data->ctrl_reg); + + if (index >= data->num_std_parents) { + /* This is an aux source request */ + if (index >= data->num_std_parents + data->num_aux_parents) { + spin_unlock(&clockman->regs_lock); + return -EINVAL; + } + + /* Select parent from aux list */ + ctrl &= ~CLK_CTRL_AUXSRC_MASK; + ctrl |= FIELD_PREP(CLK_CTRL_AUXSRC_MASK, index - data->num_std_parents); + /* Set src to aux list */ + ctrl &= ~data->clk_src_mask; + ctrl |= (AUX_SEL << CLK_CTRL_SRC_SHIFT) & data->clk_src_mask; + } else { + ctrl &= ~data->clk_src_mask; + ctrl |= (index << CLK_CTRL_SRC_SHIFT) & data->clk_src_mask; + } + + clockman_write(clockman, data->ctrl_reg, ctrl); + spin_unlock(&clockman->regs_lock); + + sel = rp1_clock_get_parent(hw); + WARN(sel != index, "(%s): Parent index req %u returned back %u\n", + clk_hw_get_name(hw), index, sel); + + return 0; +} + +static int rp1_clock_set_rate_and_parent(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, + u8 parent) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + u32 div = rp1_clock_choose_div(rate, parent_rate, data); + + WARN(rate > 4000000000ll, "rate is -ve (%d)\n", (int)rate); + + if (WARN(!div, + "clk divider calculated as 0! (%s, rate %ld, parent rate %ld)\n", + clk_hw_get_name(hw), rate, parent_rate)) + div = 1 << CLK_DIV_FRAC_BITS; + + spin_lock(&clockman->regs_lock); + + clockman_write(clockman, data->div_int_reg, div >> CLK_DIV_FRAC_BITS); + if (data->div_frac_reg) + clockman_write(clockman, data->div_frac_reg, div << (32 - CLK_DIV_FRAC_BITS)); + + spin_unlock(&clockman->regs_lock); + + if (parent != 0xff) + rp1_clock_set_parent(hw, parent); + + return 0; +} + +static int rp1_clock_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + return rp1_clock_set_rate_and_parent(hw, rate, parent_rate, 0xff); +} + +static void rp1_clock_choose_div_and_prate(struct clk_hw *hw, + int parent_idx, + unsigned long rate, + unsigned long *prate, + unsigned long *calc_rate) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + const struct rp1_clock_data *data = clock->data; + struct clk_hw *parent; + u32 div; + u64 tmp; + + parent = clk_hw_get_parent_by_index(hw, parent_idx); + + *prate = clk_hw_get_rate(parent); + div = rp1_clock_choose_div(rate, *prate, data); + + if (!div) { + *calc_rate = 0; + return; + } + + /* Recalculate to account for rounding errors */ + tmp = (u64)*prate << CLK_DIV_FRAC_BITS; + tmp = div_u64(tmp, div); + + /* + * Prevent overclocks - if all parent choices result in + * a downstream clock in excess of the maximum, then the + * call to set the clock will fail. + */ + if (tmp > data->max_freq) + *calc_rate = 0; + else + *calc_rate = tmp; +} + +static int rp1_clock_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + struct clk_hw *parent, *best_parent = NULL; + unsigned long best_rate = 0; + unsigned long best_prate = 0; + unsigned long best_rate_diff = ULONG_MAX; + unsigned long prate, calc_rate; + size_t i; + + /* + * If the NO_REPARENT flag is set, try to use existing parent. + */ + if ((clk_hw_get_flags(hw) & CLK_SET_RATE_NO_REPARENT)) { + i = rp1_clock_get_parent(hw); + parent = clk_hw_get_parent_by_index(hw, i); + if (parent) { + rp1_clock_choose_div_and_prate(hw, i, req->rate, &prate, + &calc_rate); + if (calc_rate > 0) { + req->best_parent_hw = parent; + req->best_parent_rate = prate; + req->rate = calc_rate; + return 0; + } + } + } + + /* + * Select parent clock that results in the closest rate (lower or + * higher) + */ + for (i = 0; i < clk_hw_get_num_parents(hw); i++) { + parent = clk_hw_get_parent_by_index(hw, i); + if (!parent) + continue; + + rp1_clock_choose_div_and_prate(hw, i, req->rate, &prate, + &calc_rate); + + if (abs_diff(calc_rate, req->rate) < best_rate_diff) { + best_parent = parent; + best_prate = prate; + best_rate = calc_rate; + best_rate_diff = abs_diff(calc_rate, req->rate); + + if (best_rate_diff == 0) + break; + } + } + + if (best_rate == 0) + return -EINVAL; + + req->best_parent_hw = best_parent; + req->best_parent_rate = best_prate; + req->rate = best_rate; + + return 0; +} + +static const struct clk_ops rp1_pll_core_ops = { + .is_prepared = rp1_pll_core_is_on, + .prepare = rp1_pll_core_on, + .unprepare = rp1_pll_core_off, + .set_rate = rp1_pll_core_set_rate, + .recalc_rate = rp1_pll_core_recalc_rate, + .round_rate = rp1_pll_core_round_rate, +}; + +static const struct clk_ops rp1_pll_ops = { + .set_rate = rp1_pll_set_rate, + .recalc_rate = rp1_pll_recalc_rate, + .round_rate = rp1_pll_round_rate, +}; + +static const struct clk_ops rp1_pll_ph_ops = { + .is_prepared = rp1_pll_ph_is_on, + .prepare = rp1_pll_ph_on, + .unprepare = rp1_pll_ph_off, + .recalc_rate = rp1_pll_ph_recalc_rate, + .round_rate = rp1_pll_ph_round_rate, +}; + +static const struct clk_ops rp1_pll_divider_ops = { + .is_prepared = rp1_pll_divider_is_on, + .prepare = rp1_pll_divider_on, + .unprepare = rp1_pll_divider_off, + .set_rate = rp1_pll_divider_set_rate, + .recalc_rate = rp1_pll_divider_recalc_rate, + .round_rate = rp1_pll_divider_round_rate, +}; + +static const struct clk_ops rp1_clk_ops = { + .is_prepared = rp1_clock_is_on, + .prepare = rp1_clock_on, + .unprepare = rp1_clock_off, + .recalc_rate = rp1_clock_recalc_rate, + .get_parent = rp1_clock_get_parent, + .set_parent = rp1_clock_set_parent, + .set_rate_and_parent = rp1_clock_set_rate_and_parent, + .set_rate = rp1_clock_set_rate, + .determine_rate = rp1_clock_determine_rate, +}; + +static struct clk_hw *rp1_register_pll(struct rp1_clockman *clockman, + struct rp1_clk_desc *desc) +{ + int ret; + + desc->clockman = clockman; + + ret = devm_clk_hw_register(clockman->dev, &desc->hw); + + if (ret) + return ERR_PTR(ret); + + return &desc->hw; +} + +static struct clk_hw *rp1_register_pll_divider(struct rp1_clockman *clockman, + struct rp1_clk_desc *desc) +{ + const struct rp1_pll_data *divider_data = desc->data; + int ret; + + desc->div.reg = clockman->regs + divider_data->ctrl_reg; + desc->div.shift = PLL_SEC_DIV_SHIFT; + desc->div.width = PLL_SEC_DIV_WIDTH; + desc->div.flags = CLK_DIVIDER_ROUND_CLOSEST; + desc->div.lock = &clockman->regs_lock; + desc->div.hw.init = desc->hw.init; + desc->div.table = pll_sec_div_table; + + desc->clockman = clockman; + + ret = devm_clk_hw_register(clockman->dev, &desc->div.hw); + + if (ret) + return ERR_PTR(ret); + + return &desc->div.hw; +} + +static struct clk_hw *rp1_register_clock(struct rp1_clockman *clockman, + struct rp1_clk_desc *desc) +{ + const struct rp1_clock_data *clock_data = desc->data; + int ret; + + if (WARN_ON_ONCE(MAX_CLK_PARENTS < + clock_data->num_std_parents + clock_data->num_aux_parents)) + return NULL; + + /* There must be a gap for the AUX selector */ + if (WARN_ON_ONCE(clock_data->num_std_parents > AUX_SEL && + desc->hw.init->parent_data[AUX_SEL].index != -1)) + return NULL; + + desc->clockman = clockman; + + ret = devm_clk_hw_register(clockman->dev, &desc->hw); + + if (ret) + return ERR_PTR(ret); + + return &desc->hw; +} + +/* Assignment helper macros for different clock types. */ +#define _REGISTER(f, ...) { .clk_register = f, __VA_ARGS__ } + +#define CLK_DATA(type, ...) .data = &(struct type) { __VA_ARGS__ } + +#define REGISTER_PLL(...) _REGISTER(&rp1_register_pll, \ + __VA_ARGS__) + +#define REGISTER_PLL_DIV(...) _REGISTER(&rp1_register_pll_divider, \ + __VA_ARGS__) + +#define REGISTER_CLK(...) _REGISTER(&rp1_register_clock, \ + __VA_ARGS__) + +static struct rp1_clk_desc pll_sys_core_desc = REGISTER_PLL( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "pll_sys_core", + (const struct clk_parent_data[]) { { .index = 0 } }, + &rp1_pll_core_ops, + CLK_IS_CRITICAL + ), + CLK_DATA(rp1_pll_core_data, + .cs_reg = PLL_SYS_CS, + .pwr_reg = PLL_SYS_PWR, + .fbdiv_int_reg = PLL_SYS_FBDIV_INT, + .fbdiv_frac_reg = PLL_SYS_FBDIV_FRAC, + ) +); + +static struct rp1_clk_desc pll_audio_core_desc = REGISTER_PLL( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "pll_audio_core", + (const struct clk_parent_data[]) { { .index = 0 } }, + &rp1_pll_core_ops, + CLK_IS_CRITICAL + ), + CLK_DATA(rp1_pll_core_data, + .cs_reg = PLL_AUDIO_CS, + .pwr_reg = PLL_AUDIO_PWR, + .fbdiv_int_reg = PLL_AUDIO_FBDIV_INT, + .fbdiv_frac_reg = PLL_AUDIO_FBDIV_FRAC, + ) +); + +static struct rp1_clk_desc pll_video_core_desc = REGISTER_PLL( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "pll_video_core", + (const struct clk_parent_data[]) { { .index = 0 } }, + &rp1_pll_core_ops, + CLK_IS_CRITICAL + ), + CLK_DATA(rp1_pll_core_data, + .cs_reg = PLL_VIDEO_CS, + .pwr_reg = PLL_VIDEO_PWR, + .fbdiv_int_reg = PLL_VIDEO_FBDIV_INT, + .fbdiv_frac_reg = PLL_VIDEO_FBDIV_FRAC, + ) +); + +static struct rp1_clk_desc pll_sys_desc = REGISTER_PLL( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "pll_sys", + (const struct clk_parent_data[]) { + { .hw = &pll_sys_core_desc.hw } + }, + &rp1_pll_ops, + 0 + ), + CLK_DATA(rp1_pll_data, + .ctrl_reg = PLL_SYS_PRIM, + .fc0_src = FC_NUM(0, 2), + ) +); + +static struct rp1_clk_desc pll_sys_sec_desc = REGISTER_PLL_DIV( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "pll_sys_sec", + (const struct clk_parent_data[]) { + { .hw = &pll_sys_core_desc.hw } + }, + &rp1_pll_divider_ops, + 0 + ), + CLK_DATA(rp1_pll_data, + .ctrl_reg = PLL_SYS_SEC, + .fc0_src = FC_NUM(2, 2), + ) +); + +static struct rp1_clk_desc clk_eth_tsu_desc = REGISTER_CLK( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "clk_eth_tsu", + (const struct clk_parent_data[]) { { .index = 0 } }, + &rp1_clk_ops, + 0 + ), + CLK_DATA(rp1_clock_data, + .num_std_parents = 0, + .num_aux_parents = 1, + .ctrl_reg = CLK_ETH_TSU_CTRL, + .div_int_reg = CLK_ETH_TSU_DIV_INT, + .sel_reg = CLK_ETH_TSU_SEL, + .div_int_max = DIV_INT_8BIT_MAX, + .max_freq = 50 * HZ_PER_MHZ, + .fc0_src = FC_NUM(5, 7), + ) +); + +static const struct clk_parent_data clk_eth_parents[] = { + { .hw = &pll_sys_sec_desc.div.hw }, + { .hw = &pll_sys_desc.hw }, +}; + +static struct rp1_clk_desc clk_eth_desc = REGISTER_CLK( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "clk_eth", + clk_eth_parents, + &rp1_clk_ops, + 0 + ), + CLK_DATA(rp1_clock_data, + .num_std_parents = 0, + .num_aux_parents = 2, + .ctrl_reg = CLK_ETH_CTRL, + .div_int_reg = CLK_ETH_DIV_INT, + .sel_reg = CLK_ETH_SEL, + .div_int_max = DIV_INT_8BIT_MAX, + .max_freq = 125 * HZ_PER_MHZ, + .fc0_src = FC_NUM(4, 6), + ) +); + +static const struct clk_parent_data clk_sys_parents[] = { + { .index = 0 }, + { .index = -1 }, + { .hw = &pll_sys_desc.hw }, +}; + +static struct rp1_clk_desc clk_sys_desc = REGISTER_CLK( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "clk_sys", + clk_sys_parents, + &rp1_clk_ops, + CLK_IS_CRITICAL + ), + CLK_DATA(rp1_clock_data, + .num_std_parents = 3, + .num_aux_parents = 0, + .ctrl_reg = CLK_SYS_CTRL, + .div_int_reg = CLK_SYS_DIV_INT, + .sel_reg = CLK_SYS_SEL, + .div_int_max = DIV_INT_24BIT_MAX, + .max_freq = 200 * HZ_PER_MHZ, + .fc0_src = FC_NUM(0, 4), + .clk_src_mask = 0x3, + ) +); + +static struct rp1_clk_desc pll_sys_pri_ph_desc = REGISTER_PLL( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "pll_sys_pri_ph", + (const struct clk_parent_data[]) { + { .hw = &pll_sys_desc.hw } + }, + &rp1_pll_ph_ops, + 0 + ), + CLK_DATA(rp1_pll_ph_data, + .ph_reg = PLL_SYS_PRIM, + .fixed_divider = 2, + .phase = RP1_PLL_PHASE_0, + .fc0_src = FC_NUM(1, 2), + ) +); + +static struct rp1_clk_desc *const clk_desc_array[] = { + [RP1_PLL_SYS_CORE] = &pll_sys_core_desc, + [RP1_PLL_AUDIO_CORE] = &pll_audio_core_desc, + [RP1_PLL_VIDEO_CORE] = &pll_video_core_desc, + [RP1_PLL_SYS] = &pll_sys_desc, + [RP1_CLK_ETH_TSU] = &clk_eth_tsu_desc, + [RP1_CLK_ETH] = &clk_eth_desc, + [RP1_CLK_SYS] = &clk_sys_desc, + [RP1_PLL_SYS_PRI_PH] = &pll_sys_pri_ph_desc, + [RP1_PLL_SYS_SEC] = &pll_sys_sec_desc, +}; + +static const struct regmap_range rp1_reg_ranges[] = { + regmap_reg_range(PLL_SYS_CS, PLL_SYS_SEC), + regmap_reg_range(PLL_AUDIO_CS, PLL_AUDIO_TERN), + regmap_reg_range(PLL_VIDEO_CS, PLL_VIDEO_SEC), + regmap_reg_range(GPCLK_OE_CTRL, GPCLK_OE_CTRL), + regmap_reg_range(CLK_SYS_CTRL, CLK_SYS_DIV_INT), + regmap_reg_range(CLK_SYS_SEL, CLK_SYS_SEL), + regmap_reg_range(CLK_SLOW_SYS_CTRL, CLK_SLOW_SYS_DIV_INT), + regmap_reg_range(CLK_SLOW_SYS_SEL, CLK_SLOW_SYS_SEL), + regmap_reg_range(CLK_DMA_CTRL, CLK_DMA_DIV_INT), + regmap_reg_range(CLK_DMA_SEL, CLK_DMA_SEL), + regmap_reg_range(CLK_UART_CTRL, CLK_UART_DIV_INT), + regmap_reg_range(CLK_UART_SEL, CLK_UART_SEL), + regmap_reg_range(CLK_ETH_CTRL, CLK_ETH_DIV_INT), + regmap_reg_range(CLK_ETH_SEL, CLK_ETH_SEL), + regmap_reg_range(CLK_PWM0_CTRL, CLK_PWM0_SEL), + regmap_reg_range(CLK_PWM1_CTRL, CLK_PWM1_SEL), + regmap_reg_range(CLK_AUDIO_IN_CTRL, CLK_AUDIO_IN_DIV_INT), + regmap_reg_range(CLK_AUDIO_IN_SEL, CLK_AUDIO_IN_SEL), + regmap_reg_range(CLK_AUDIO_OUT_CTRL, CLK_AUDIO_OUT_DIV_INT), + regmap_reg_range(CLK_AUDIO_OUT_SEL, CLK_AUDIO_OUT_SEL), + regmap_reg_range(CLK_I2S_CTRL, CLK_I2S_DIV_INT), + regmap_reg_range(CLK_I2S_SEL, CLK_I2S_SEL), + regmap_reg_range(CLK_MIPI0_CFG_CTRL, CLK_MIPI0_CFG_DIV_INT), + regmap_reg_range(CLK_MIPI0_CFG_SEL, CLK_MIPI0_CFG_SEL), + regmap_reg_range(CLK_MIPI1_CFG_CTRL, CLK_MIPI1_CFG_DIV_INT), + regmap_reg_range(CLK_MIPI1_CFG_SEL, CLK_MIPI1_CFG_SEL), + regmap_reg_range(CLK_PCIE_AUX_CTRL, CLK_PCIE_AUX_DIV_INT), + regmap_reg_range(CLK_PCIE_AUX_SEL, CLK_PCIE_AUX_SEL), + regmap_reg_range(CLK_USBH0_MICROFRAME_CTRL, CLK_USBH0_MICROFRAME_DIV_INT), + regmap_reg_range(CLK_USBH0_MICROFRAME_SEL, CLK_USBH0_MICROFRAME_SEL), + regmap_reg_range(CLK_USBH1_MICROFRAME_CTRL, CLK_USBH1_MICROFRAME_DIV_INT), + regmap_reg_range(CLK_USBH1_MICROFRAME_SEL, CLK_USBH1_MICROFRAME_SEL), + regmap_reg_range(CLK_USBH0_SUSPEND_CTRL, CLK_USBH0_SUSPEND_DIV_INT), + regmap_reg_range(CLK_USBH0_SUSPEND_SEL, CLK_USBH0_SUSPEND_SEL), + regmap_reg_range(CLK_USBH1_SUSPEND_CTRL, CLK_USBH1_SUSPEND_DIV_INT), + regmap_reg_range(CLK_USBH1_SUSPEND_SEL, CLK_USBH1_SUSPEND_SEL), + regmap_reg_range(CLK_ETH_TSU_CTRL, CLK_ETH_TSU_DIV_INT), + regmap_reg_range(CLK_ETH_TSU_SEL, CLK_ETH_TSU_SEL), + regmap_reg_range(CLK_ADC_CTRL, CLK_ADC_DIV_INT), + regmap_reg_range(CLK_ADC_SEL, CLK_ADC_SEL), + regmap_reg_range(CLK_SDIO_TIMER_CTRL, CLK_SDIO_TIMER_DIV_INT), + regmap_reg_range(CLK_SDIO_TIMER_SEL, CLK_SDIO_TIMER_SEL), + regmap_reg_range(CLK_SDIO_ALT_SRC_CTRL, CLK_SDIO_ALT_SRC_DIV_INT), + regmap_reg_range(CLK_SDIO_ALT_SRC_SEL, CLK_SDIO_ALT_SRC_SEL), + regmap_reg_range(CLK_GP0_CTRL, CLK_GP0_SEL), + regmap_reg_range(CLK_GP1_CTRL, CLK_GP1_SEL), + regmap_reg_range(CLK_GP2_CTRL, CLK_GP2_SEL), + regmap_reg_range(CLK_GP3_CTRL, CLK_GP3_SEL), + regmap_reg_range(CLK_GP4_CTRL, CLK_GP4_SEL), + regmap_reg_range(CLK_GP5_CTRL, CLK_GP5_SEL), + regmap_reg_range(CLK_SYS_RESUS_CTRL, CLK_SYS_RESUS_CTRL), + regmap_reg_range(CLK_SLOW_SYS_RESUS_CTRL, CLK_SLOW_SYS_RESUS_CTRL), + regmap_reg_range(FC0_REF_KHZ, FC0_RESULT), + regmap_reg_range(VIDEO_CLK_VEC_CTRL, VIDEO_CLK_VEC_DIV_INT), + regmap_reg_range(VIDEO_CLK_VEC_SEL, VIDEO_CLK_DPI_DIV_INT), + regmap_reg_range(VIDEO_CLK_DPI_SEL, VIDEO_CLK_MIPI1_DPI_SEL), +}; + +static const struct regmap_access_table rp1_reg_table = { + .yes_ranges = rp1_reg_ranges, + .n_yes_ranges = ARRAY_SIZE(rp1_reg_ranges), +}; + +static const struct regmap_config rp1_clk_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = PLL_VIDEO_SEC, + .name = "rp1-clk", + .rd_table = &rp1_reg_table, +}; + +static int rp1_clk_probe(struct platform_device *pdev) +{ + const size_t asize = ARRAY_SIZE(clk_desc_array); + struct rp1_clk_desc *desc; + struct device *dev = &pdev->dev; + struct rp1_clockman *clockman; + struct clk_hw **hws; + unsigned int i; + + clockman = devm_kzalloc(dev, struct_size(clockman, onecell.hws, asize), + GFP_KERNEL); + if (!clockman) + return -ENOMEM; + + spin_lock_init(&clockman->regs_lock); + clockman->dev = dev; + + clockman->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(clockman->regs)) + return PTR_ERR(clockman->regs); + + clockman->regmap = devm_regmap_init_mmio(dev, clockman->regs, + &rp1_clk_regmap_cfg); + if (IS_ERR(clockman->regmap)) { + dev_err_probe(dev, PTR_ERR(clockman->regmap), + "could not init clock regmap\n"); + return PTR_ERR(clockman->regmap); + } + + clockman->onecell.num = asize; + hws = clockman->onecell.hws; + + for (i = 0; i < asize; i++) { + desc = clk_desc_array[i]; + if (desc && desc->clk_register && desc->data) { + hws[i] = desc->clk_register(clockman, desc); + if (IS_ERR_OR_NULL(hws[i])) + dev_err_probe(dev, PTR_ERR(hws[i]), + "Unable to register clock: %s\n", + clk_hw_get_name(hws[i])); + } + } + + platform_set_drvdata(pdev, clockman); + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &clockman->onecell); +} + +static const struct of_device_id rp1_clk_of_match[] = { + { .compatible = "raspberrypi,rp1-clocks" }, + {} +}; +MODULE_DEVICE_TABLE(of, rp1_clk_of_match); + +static struct platform_driver rp1_clk_driver = { + .driver = { + .name = "rp1-clk", + .of_match_table = rp1_clk_of_match, + }, + .probe = rp1_clk_probe, +}; + +module_platform_driver(rp1_clk_driver); + +MODULE_AUTHOR("Naushir Patuck "); +MODULE_AUTHOR("Andrea della Porta "); +MODULE_DESCRIPTION("RP1 clock driver"); +MODULE_LICENSE("GPL");