diff mbox

[v2,04/14] crypto: caam - Modify Freescale CAAM driver Scatter Gather entry definition

Message ID 1438799328-10757-5-git-send-email-vicki.milhoan@freescale.com (mailing list archive)
State Accepted
Delegated to: Herbert Xu
Headers show

Commit Message

Victoria Milhoan Aug. 5, 2015, 6:28 p.m. UTC
Modify the Scatter-Gather entry definitions for the Freescale
CAAM driver to include support for both 64- and 32-bit DMA pointers.

Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
---
 drivers/crypto/caam/desc.h       | 25 +++++++++++++++++++++----
 drivers/crypto/caam/sg_sw_sec4.h |  1 -
 2 files changed, 21 insertions(+), 5 deletions(-)
diff mbox

Patch

diff --git a/drivers/crypto/caam/desc.h b/drivers/crypto/caam/desc.h
index d397ff9..405acbf 100644
--- a/drivers/crypto/caam/desc.h
+++ b/drivers/crypto/caam/desc.h
@@ -8,12 +8,29 @@ 
 #ifndef DESC_H
 #define DESC_H
 
+/*
+ * 16-byte hardware scatter/gather table
+ * An 8-byte table exists in the hardware spec, but has never been
+ * implemented to date. The 8/16 option is selected at RTL-compile-time.
+ * and this selection is visible in the Compile Time Parameters Register
+ */
+
+#define SEC4_SG_LEN_EXT		0x80000000	/* Entry points to table */
+#define SEC4_SG_LEN_FIN		0x40000000	/* Last ent in table */
+#define SEC4_SG_BPID_MASK	0x000000ff
+#define SEC4_SG_BPID_SHIFT	16
+#define SEC4_SG_LEN_MASK	0x3fffffff	/* Excludes EXT and FINAL */
+#define SEC4_SG_OFFS_MASK	0x00001fff
+
 struct sec4_sg_entry {
-	u64 ptr;
-#define SEC4_SG_LEN_FIN 0x40000000
-#define SEC4_SG_LEN_EXT 0x80000000
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+	dma_addr_t ptr;
+#else
+	u32 rsvd1;
+	dma_addr_t ptr;
+#endif
 	u32 len;
-	u8 reserved;
+	u8 rsvd2;
 	u8 buf_pool_id;
 	u16 offset;
 };
diff --git a/drivers/crypto/caam/sg_sw_sec4.h b/drivers/crypto/caam/sg_sw_sec4.h
index b68b74c..711bb39 100644
--- a/drivers/crypto/caam/sg_sw_sec4.h
+++ b/drivers/crypto/caam/sg_sw_sec4.h
@@ -15,7 +15,6 @@  static inline void dma_to_sec4_sg_one(struct sec4_sg_entry *sec4_sg_ptr,
 {
 	sec4_sg_ptr->ptr = dma;
 	sec4_sg_ptr->len = len;
-	sec4_sg_ptr->reserved = 0;
 	sec4_sg_ptr->buf_pool_id = 0;
 	sec4_sg_ptr->offset = offset;
 #ifdef DEBUG