diff mbox series

[v2,4/4] ARM64: dts: amlogic: adds crypto hardware node

Message ID 1571031104-6880-5-git-send-email-clabbe@baylibre.com (mailing list archive)
State Not Applicable
Delegated to: Herbert Xu
Headers show
Series crypto: add amlogic crypto offloader driver | expand

Commit Message

Corentin LABBE Oct. 14, 2019, 5:31 a.m. UTC 
This patch adds the GXL crypto hardware node for all GXL SoCs.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Kevin Hilman Oct. 16, 2019, 4:52 p.m. UTC | #1 
Corentin Labbe <clabbe@baylibre.com> writes:

> This patch adds the GXL crypto hardware node for all GXL SoCs.
>
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index 49ff0a7d0210..ed33d8efaf62 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -36,6 +36,16 @@
>  				phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>;
>  			};
>  		};
> +
> +		crypto: crypto@c883e000 {
> +			compatible = "amlogic,gxl-crypto";
> +			reg = <0x0 0xc883e000 0x0 0x36>;
> +			interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
> +				     <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
> +			clocks = <&clkc CLKID_BLKMV>;
> +			clock-names = "blkmv";
> +			status = "okay";
> +		};

Looks good.

I'll apply this via the amlogic tree as soon as Herbet applies the
driver part.

Reviewed-by: Kevin Hilman <khilman@baylibre.com>

Kevin
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 49ff0a7d0210..ed33d8efaf62 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -36,6 +36,16 @@ 
 				phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>;
 			};
 		};
+
+		crypto: crypto@c883e000 {
+			compatible = "amlogic,gxl-crypto";
+			reg = <0x0 0xc883e000 0x0 0x36>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc CLKID_BLKMV>;
+			clock-names = "blkmv";
+			status = "okay";
+		};
 	};
 };