@@ -796,6 +796,16 @@ config CRYPTO_DEV_ZYNQMP_AES
accelerator. Select this if you want to use the ZynqMP module
for AES algorithms.
+config CRYPTO_DEV_ZYNQMP_SHA3
+ bool "Support for Xilinx ZynqMP SHA3 hardware accelerator"
+ depends on ARCH_ZYNQMP || COMPILE_TEST
+ select CRYPTO_SHA3
+ help
+ Xilinx ZynqMP has SHA3 engine used for secure hash calculation.
+ This driver interfaces with SHA3 hardware engine.
+ Select this if you want to use the ZynqMP module
+ for SHA3 hash computation.
+
source "drivers/crypto/chelsio/Kconfig"
source "drivers/crypto/virtio/Kconfig"
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_CRYPTO_DEV_ZYNQMP_AES) += zynqmp-aes-gcm.o
+obj-$(CONFIG_CRYPTO_DEV_ZYNQMP_SHA3) += zynqmp-sha.o
new file mode 100644
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx ZynqMP SHA Driver.
+ * Copyright (c) 2022 Xilinx Inc.
+ */
+#include <asm/cacheflush.h>
+#include <crypto/hash.h>
+#include <crypto/internal/hash.h>
+#include <crypto/sha3.h>
+#include <linux/crypto.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/firmware/xlnx-zynqmp.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#define ZYNQMP_DMA_BIT_MASK 32U
+#define ZYNQMP_DMA_ALLOC_FIXED_SIZE 0x1000U
+
+enum zynqmp_sha_op {
+ ZYNQMP_SHA3_INIT = 1,
+ ZYNQMP_SHA3_UPDATE = 2,
+ ZYNQMP_SHA3_FINAL = 4,
+};
+
+struct zynqmp_sha_drv_ctx {
+ struct shash_alg sha3_384;
+ struct device *dev;
+};
+
+struct zynqmp_sha_tfm_ctx {
+ struct device *dev;
+ struct crypto_shash *fbk_tfm;
+};
+
+struct zynqmp_sha_desc_ctx {
+ struct shash_desc fbk_req;
+};
+
+static dma_addr_t update_dma_addr, final_dma_addr;
+static char *ubuf, *fbuf;
+
+static int zynqmp_sha_init_tfm(struct crypto_shash *hash)
+{
+ const char *fallback_driver_name = crypto_shash_alg_name(hash);
+ struct zynqmp_sha_tfm_ctx *tfm_ctx = crypto_shash_ctx(hash);
+ struct shash_alg *alg = crypto_shash_alg(hash);
+ struct crypto_shash *fallback_tfm;
+ struct zynqmp_sha_drv_ctx *drv_ctx;
+
+ drv_ctx = container_of(alg, struct zynqmp_sha_drv_ctx, sha3_384);
+ tfm_ctx->dev = drv_ctx->dev;
+
+ /* Allocate a fallback and abort if it failed. */
+ fallback_tfm = crypto_alloc_shash(fallback_driver_name, 0,
+ CRYPTO_ALG_NEED_FALLBACK);
+ if (IS_ERR(fallback_tfm))
+ return PTR_ERR(fallback_tfm);
+
+ tfm_ctx->fbk_tfm = fallback_tfm;
+ hash->descsize += crypto_shash_descsize(tfm_ctx->fbk_tfm);
+
+ return 0;
+}
+
+static void zynqmp_sha_exit_tfm(struct crypto_shash *hash)
+{
+ struct zynqmp_sha_tfm_ctx *tfm_ctx = crypto_shash_ctx(hash);
+
+ if (tfm_ctx->fbk_tfm) {
+ crypto_free_shash(tfm_ctx->fbk_tfm);
+ tfm_ctx->fbk_tfm = NULL;
+ }
+
+ memzero_explicit(tfm_ctx, sizeof(struct zynqmp_sha_tfm_ctx));
+}
+
+static int zynqmp_sha_init(struct shash_desc *desc)
+{
+ struct zynqmp_sha_desc_ctx *dctx = shash_desc_ctx(desc);
+ struct zynqmp_sha_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
+
+ dctx->fbk_req.tfm = tctx->fbk_tfm;
+ return crypto_shash_init(&dctx->fbk_req);
+}
+
+static int zynqmp_sha_update(struct shash_desc *desc, const u8 *data, unsigned int length)
+{
+ struct zynqmp_sha_desc_ctx *dctx = shash_desc_ctx(desc);
+
+ return crypto_shash_update(&dctx->fbk_req, data, length);
+}
+
+static int zynqmp_sha_final(struct shash_desc *desc, u8 *out)
+{
+ struct zynqmp_sha_desc_ctx *dctx = shash_desc_ctx(desc);
+
+ return crypto_shash_final(&dctx->fbk_req, out);
+}
+
+static int zynqmp_sha_finup(struct shash_desc *desc, const u8 *data, unsigned int length, u8 *out)
+{
+ struct zynqmp_sha_desc_ctx *dctx = shash_desc_ctx(desc);
+
+ return crypto_shash_finup(&dctx->fbk_req, data, length, out);
+}
+
+static int zynqmp_sha_import(struct shash_desc *desc, const void *in)
+{
+ struct zynqmp_sha_desc_ctx *dctx = shash_desc_ctx(desc);
+ struct zynqmp_sha_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
+
+ dctx->fbk_req.tfm = tctx->fbk_tfm;
+ return crypto_shash_import(&dctx->fbk_req, in);
+}
+
+static int zynqmp_sha_export(struct shash_desc *desc, void *out)
+{
+ struct zynqmp_sha_desc_ctx *dctx = shash_desc_ctx(desc);
+
+ return crypto_shash_export(&dctx->fbk_req, out);
+}
+
+static int zynqmp_sha_digest(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out)
+{
+ unsigned int remaining_len = len;
+ int update_size;
+ int ret;
+
+ ret = zynqmp_pm_sha_hash(0, 0, ZYNQMP_SHA3_INIT);
+ if (ret)
+ return ret;
+
+ while (remaining_len != 0) {
+ memset(ubuf, 0, ZYNQMP_DMA_ALLOC_FIXED_SIZE);
+ if (remaining_len >= ZYNQMP_DMA_ALLOC_FIXED_SIZE) {
+ update_size = ZYNQMP_DMA_ALLOC_FIXED_SIZE;
+ remaining_len -= ZYNQMP_DMA_ALLOC_FIXED_SIZE;
+ } else {
+ update_size = remaining_len;
+ remaining_len = 0;
+ }
+ memcpy(ubuf, data, update_size);
+ flush_icache_range((unsigned long)ubuf, (unsigned long)ubuf + update_size);
+ ret = zynqmp_pm_sha_hash(update_dma_addr, update_size, ZYNQMP_SHA3_UPDATE);
+ if (ret)
+ return ret;
+
+ data += update_size;
+ }
+
+ ret = zynqmp_pm_sha_hash(final_dma_addr, SHA3_384_DIGEST_SIZE, ZYNQMP_SHA3_FINAL);
+ memcpy(out, fbuf, SHA3_384_DIGEST_SIZE);
+ memset(fbuf, 0, SHA3_384_DIGEST_SIZE);
+
+ return ret;
+}
+
+static struct zynqmp_sha_drv_ctx sha3_drv_ctx = {
+ .sha3_384 = {
+ .init = zynqmp_sha_init,
+ .update = zynqmp_sha_update,
+ .final = zynqmp_sha_final,
+ .finup = zynqmp_sha_finup,
+ .digest = zynqmp_sha_digest,
+ .export = zynqmp_sha_export,
+ .import = zynqmp_sha_import,
+ .init_tfm = zynqmp_sha_init_tfm,
+ .exit_tfm = zynqmp_sha_exit_tfm,
+ .descsize = sizeof(struct zynqmp_sha_desc_ctx),
+ .statesize = sizeof(struct sha3_state),
+ .digestsize = SHA3_384_DIGEST_SIZE,
+ .base = {
+ .cra_name = "sha3-384",
+ .cra_driver_name = "zynqmp-sha3-384",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_ALLOCATES_MEMORY |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = SHA3_384_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct zynqmp_sha_tfm_ctx),
+ .cra_alignmask = 3,
+ .cra_module = THIS_MODULE,
+ }
+ }
+};
+
+static int zynqmp_sha_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ int err;
+
+ err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(ZYNQMP_DMA_BIT_MASK));
+ if (err < 0) {
+ dev_err(dev, "No usable DMA configuration\n");
+ return err;
+ }
+
+ err = crypto_register_shash(&sha3_drv_ctx.sha3_384);
+ if (err < 0) {
+ dev_err(dev, "Failed to register shash alg.\n");
+ return err;
+ }
+
+ sha3_drv_ctx.dev = dev;
+ platform_set_drvdata(pdev, &sha3_drv_ctx);
+
+ ubuf = dma_alloc_coherent(dev, ZYNQMP_DMA_ALLOC_FIXED_SIZE, &update_dma_addr, GFP_KERNEL);
+ if (!ubuf) {
+ err = -ENOMEM;
+ goto err_shash;
+ }
+
+ fbuf = dma_alloc_coherent(dev, SHA3_384_DIGEST_SIZE, &final_dma_addr, GFP_KERNEL);
+ if (!fbuf) {
+ err = -ENOMEM;
+ goto err_mem;
+ }
+
+ return 0;
+
+err_mem:
+ dma_free_coherent(sha3_drv_ctx.dev, ZYNQMP_DMA_ALLOC_FIXED_SIZE, ubuf, update_dma_addr);
+
+err_shash:
+ crypto_unregister_shash(&sha3_drv_ctx.sha3_384);
+
+ return err;
+}
+
+static int zynqmp_sha_remove(struct platform_device *pdev)
+{
+ sha3_drv_ctx.dev = platform_get_drvdata(pdev);
+
+ dma_free_coherent(sha3_drv_ctx.dev, ZYNQMP_DMA_ALLOC_FIXED_SIZE, ubuf, update_dma_addr);
+ dma_free_coherent(sha3_drv_ctx.dev, SHA3_384_DIGEST_SIZE, fbuf, final_dma_addr);
+ crypto_unregister_shash(&sha3_drv_ctx.sha3_384);
+
+ return 0;
+}
+
+static struct platform_driver zynqmp_sha_driver = {
+ .probe = zynqmp_sha_probe,
+ .remove = zynqmp_sha_remove,
+ .driver = {
+ .name = "zynqmp-sha3-384",
+ },
+};
+
+static int __init sha_driver_init(void)
+{
+ struct platform_device *pdev;
+ int ret;
+
+ ret = platform_driver_register(&zynqmp_sha_driver);
+ if (ret)
+ return ret;
+
+ pdev = platform_device_register_simple(zynqmp_sha_driver.driver.name,
+ 0, NULL, 0);
+ if (IS_ERR(pdev)) {
+ ret = PTR_ERR(pdev);
+ platform_driver_unregister(&zynqmp_sha_driver);
+ pr_info("Failed to register ZynqMP SHA3 dvixe %d\n", ret);
+ }
+
+ return ret;
+}
+
+device_initcall(sha_driver_init);
+
+static void __exit sha_driver_exit(void)
+{
+ platform_driver_unregister(&zynqmp_sha_driver);
+}
+
+module_platform_driver(zynqmp_sha_driver);
+
+MODULE_DESCRIPTION("ZynqMP SHA3 hardware acceleration support.");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Harsha <harsha.harsha@xilinx.com>");
This patch adds SHA3 driver support for the Xilinx ZynqMP SoC. Xilinx ZynqMP SoC has SHA3 engine used for secure hash calculation. The flow is SHA3 request from Userspace -> SHA3 driver-> ZynqMp driver-> Firmware -> SHA3 HW Engine SHA3 HW engine in Xilinx ZynqMP SoC, does not support parallel processing of 2 hash requests. Therefore, software fallback is being used for init, update, final, export and import in the ZynqMP SHA driver For digest, the calculation of SHA3 hash is done by the hardened SHA3 accelerator in Xilinx ZynqMP SoC. Signed-off-by: Harsha <harsha.harsha@xilinx.com> --- drivers/crypto/Kconfig | 10 ++ drivers/crypto/xilinx/Makefile | 1 + drivers/crypto/xilinx/zynqmp-sha.c | 285 +++++++++++++++++++++++++++++++++++++ 3 files changed, 296 insertions(+) create mode 100644 drivers/crypto/xilinx/zynqmp-sha.c