diff mbox

crypto: ccp - Set the AES size field for all modes

Message ID 20170208190706.7984.97805.stgit@taos (mailing list archive)
State Accepted
Delegated to: Herbert Xu
Headers show

Commit Message

Gary R Hook Feb. 8, 2017, 7:07 p.m. UTC 
Ensure that the size field is correctly populated for
all AES modes.

Signed-off-by: Gary R Hook <gary.hook@amd.com>
---
 drivers/crypto/ccp/ccp-dev-v5.c |    3 +--
 drivers/crypto/ccp/ccp-dev.h    |    1 +
 drivers/crypto/ccp/ccp-ops.c    |    8 ++++++++
 3 files changed, 10 insertions(+), 2 deletions(-)

Comments

Herbert Xu Feb. 15, 2017, 5:32 a.m. UTC | #1 
On Wed, Feb 08, 2017 at 01:07:06PM -0600, Gary R Hook wrote:
> Ensure that the size field is correctly populated for
> all AES modes.
> 
> Signed-off-by: Gary R Hook <gary.hook@amd.com>

Patch applied.  Thanks.
diff mbox

Patch

diff --git a/drivers/crypto/ccp/ccp-dev-v5.c b/drivers/crypto/ccp/ccp-dev-v5.c
index 612898b..9c6ff8b8 100644
--- a/drivers/crypto/ccp/ccp-dev-v5.c
+++ b/drivers/crypto/ccp/ccp-dev-v5.c
@@ -284,8 +284,7 @@  static int ccp5_perform_aes(struct ccp_op *op)
 	CCP_AES_ENCRYPT(&function) = op->u.aes.action;
 	CCP_AES_MODE(&function) = op->u.aes.mode;
 	CCP_AES_TYPE(&function) = op->u.aes.type;
-	if (op->u.aes.mode == CCP_AES_MODE_CFB)
-		CCP_AES_SIZE(&function) = 0x7f;
+	CCP_AES_SIZE(&function) = op->u.aes.size;
 
 	CCP5_CMD_FUNCTION(&desc) = function.raw;
 
diff --git a/drivers/crypto/ccp/ccp-dev.h b/drivers/crypto/ccp/ccp-dev.h
index 649e561..2b5c01f 100644
--- a/drivers/crypto/ccp/ccp-dev.h
+++ b/drivers/crypto/ccp/ccp-dev.h
@@ -467,6 +467,7 @@  struct ccp_aes_op {
 	enum ccp_aes_type type;
 	enum ccp_aes_mode mode;
 	enum ccp_aes_action action;
+	unsigned int size;
 };
 
 struct ccp_xts_aes_op {
diff --git a/drivers/crypto/ccp/ccp-ops.c b/drivers/crypto/ccp/ccp-ops.c
index 50fae44..6878160 100644
--- a/drivers/crypto/ccp/ccp-ops.c
+++ b/drivers/crypto/ccp/ccp-ops.c
@@ -692,6 +692,14 @@  static int ccp_run_aes_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
 			goto e_ctx;
 		}
 	}
+	switch (aes->mode) {
+	case CCP_AES_MODE_CFB: /* CFB128 only */
+	case CCP_AES_MODE_CTR:
+		op.u.aes.size = AES_BLOCK_SIZE * BITS_PER_BYTE - 1;
+		break;
+	default:
+		op.u.aes.size = 0;
+	}
 
 	/* Prepare the input and output data workareas. For in-place
 	 * operations we need to set the dma direction to BIDIRECTIONAL