@@ -2,6 +2,12 @@
config CRYPTO_DEV_FSL_CAAM_COMMON
tristate
+config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
+ tristate
+
+config CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
+ tristate
+
config CRYPTO_DEV_FSL_CAAM
tristate "Freescale CAAM-Multicore platform driver backend"
depends on FSL_SOC || ARCH_MXC || ARCH_LAYERSCAPE
@@ -25,7 +31,7 @@ config CRYPTO_DEV_FSL_CAAM_DEBUG
Selecting this will enable printing of various debug
information in the CAAM driver.
-config CRYPTO_DEV_FSL_CAAM_JR
+menuconfig CRYPTO_DEV_FSL_CAAM_JR
tristate "Freescale CAAM Job Ring driver backend"
default y
help
@@ -86,8 +92,9 @@ config CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD
threshold. Range is 1-65535.
config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
- tristate "Register algorithm implementations with the Crypto API"
+ bool "Register algorithm implementations with the Crypto API"
default y
+ select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
select CRYPTO_AEAD
select CRYPTO_AUTHENC
select CRYPTO_BLKCIPHER
@@ -97,13 +104,11 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
scatterlist crypto API (such as the linux native IPSec
stack) to the SEC4 via job ring.
- To compile this as a module, choose M here: the module
- will be called caamalg.
-
config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI
- tristate "Queue Interface as Crypto API backend"
+ bool "Queue Interface as Crypto API backend"
depends on FSL_DPAA && NET
default y
+ select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
select CRYPTO_AUTHENC
select CRYPTO_BLKCIPHER
help
@@ -114,33 +119,26 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI
assigned to the kernel should also be more than the number of
job rings.
- To compile this as a module, choose M here: the module
- will be called caamalg_qi.
-
config CRYPTO_DEV_FSL_CAAM_AHASH_API
- tristate "Register hash algorithm implementations with Crypto API"
+ bool "Register hash algorithm implementations with Crypto API"
default y
+ select CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
select CRYPTO_HASH
help
Selecting this will offload ahash for users of the
scatterlist crypto API to the SEC4 via job ring.
- To compile this as a module, choose M here: the module
- will be called caamhash.
-
config CRYPTO_DEV_FSL_CAAM_PKC_API
- tristate "Register public key cryptography implementations with Crypto API"
+ bool "Register public key cryptography implementations with Crypto API"
default y
select CRYPTO_RSA
help
Selecting this will allow SEC Public key support for RSA.
Supported cryptographic primitives: encryption, decryption,
signature and verification.
- To compile this as a module, choose M here: the module
- will be called caam_pkc.
config CRYPTO_DEV_FSL_CAAM_RNG_API
- tristate "Register caam device for hwrng API"
+ bool "Register caam device for hwrng API"
default y
select CRYPTO_RNG
select HW_RANDOM
@@ -148,9 +146,6 @@ config CRYPTO_DEV_FSL_CAAM_RNG_API
Selecting this will register the SEC4 hardware rng to
the hw_random API for suppying the kernel entropy pool.
- To compile this as a module, choose M here: the module
- will be called caamrng.
-
endif # CRYPTO_DEV_FSL_CAAM_JR
endif # CRYPTO_DEV_FSL_CAAM
@@ -160,6 +155,8 @@ config CRYPTO_DEV_FSL_DPAA2_CAAM
depends on FSL_MC_DPIO
depends on NETDEVICES
select CRYPTO_DEV_FSL_CAAM_COMMON
+ select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
+ select CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
select CRYPTO_BLKCIPHER
select CRYPTO_AUTHENC
select CRYPTO_AEAD
@@ -171,12 +168,3 @@ config CRYPTO_DEV_FSL_DPAA2_CAAM
To compile this as a module, choose M here: the module
will be called dpaa2_caam.
-
-config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
- def_tristate (CRYPTO_DEV_FSL_CAAM_CRYPTO_API || \
- CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI || \
- CRYPTO_DEV_FSL_DPAA2_CAAM)
-
-config CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
- def_tristate (CRYPTO_DEV_FSL_CAAM_AHASH_API || \
- CRYPTO_DEV_FSL_DPAA2_CAAM)
@@ -11,20 +11,20 @@ ccflags-y += -DVERSION=\"\"
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON) += error.o
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caam.o
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_JR) += caam_jr.o
-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o
-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += caamalg_qi.o
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC) += caamalg_desc.o
-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC) += caamhash_desc.o
-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o
-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API) += caam_pkc.o
-caam-objs := ctrl.o
-caam_jr-objs := jr.o key_gen.o
-caam_pkc-y := caampkc.o pkc_desc.o
+caam-y := ctrl.o
+caam_jr-y := jr.o key_gen.o
+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o
+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += caamalg_qi.o
+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o
+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o
+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API) += caampkc.o pkc_desc.o
+
+caam-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += qi.o
ifneq ($(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI),)
ccflags-y += -DCONFIG_CAAM_QI
- caam-objs += qi.o
endif
obj-$(CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM) += dpaa2_caam.o
@@ -3466,7 +3466,7 @@ static void caam_aead_exit(struct crypto_aead *tfm)
caam_exit_common(crypto_aead_ctx(tfm));
}
-static void __exit caam_algapi_exit(void)
+void caam_algapi_exit(void)
{
int i;
@@ -3511,43 +3511,15 @@ static void caam_aead_alg_init(struct caam_aead_alg *t_alg)
alg->exit = caam_aead_exit;
}
-static int __init caam_algapi_init(void)
+int caam_algapi_init(struct device *ctrldev)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct caam_drv_private *priv;
+ struct caam_drv_private *priv = dev_get_drvdata(ctrldev);
int i = 0, err = 0;
u32 aes_vid, aes_inst, des_inst, md_vid, md_inst, ccha_inst, ptha_inst;
u32 arc4_inst;
unsigned int md_limit = SHA512_DIGEST_SIZE;
bool registered = false, gcm_support;
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return -ENODEV;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev) {
- of_node_put(dev_node);
- return -ENODEV;
- }
-
- priv = dev_get_drvdata(&pdev->dev);
- of_node_put(dev_node);
-
- /*
- * If priv is NULL, it's probably because the caam driver wasn't
- * properly initialized (e.g. RNG4 init failed). Thus, bail out here.
- */
- if (!priv) {
- err = -ENODEV;
- goto out_put_dev;
- }
-
-
/*
* Register crypto algorithms the device supports.
* First, detect presence and attributes of DES, AES, and MD blocks.
@@ -3690,14 +3662,5 @@ static int __init caam_algapi_init(void)
if (registered)
pr_info("caam algorithms registered in /proc/crypto\n");
-out_put_dev:
- put_device(&pdev->dev);
return err;
}
-
-module_init(caam_algapi_init);
-module_exit(caam_algapi_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("FSL CAAM support for crypto API");
-MODULE_AUTHOR("Freescale Semiconductor - NMG/STC");
@@ -2489,7 +2489,7 @@ static void caam_aead_exit(struct crypto_aead *tfm)
caam_exit_common(crypto_aead_ctx(tfm));
}
-static void __exit caam_qi_algapi_exit(void)
+void caam_qi_algapi_exit(void)
{
int i;
@@ -2534,45 +2534,17 @@ static void caam_aead_alg_init(struct caam_aead_alg *t_alg)
alg->exit = caam_aead_exit;
}
-static int __init caam_qi_algapi_init(void)
+int caam_qi_algapi_init(struct device *ctrldev)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct device *ctrldev;
- struct caam_drv_private *priv;
+ struct caam_drv_private *priv = dev_get_drvdata(ctrldev);
int i = 0, err = 0;
u32 aes_vid, aes_inst, des_inst, md_vid, md_inst;
unsigned int md_limit = SHA512_DIGEST_SIZE;
bool registered = false;
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return -ENODEV;
- }
-
- pdev = of_find_device_by_node(dev_node);
- of_node_put(dev_node);
- if (!pdev)
- return -ENODEV;
-
- ctrldev = &pdev->dev;
- priv = dev_get_drvdata(ctrldev);
-
- /*
- * If priv is NULL, it's probably because the caam driver wasn't
- * properly initialized (e.g. RNG4 init failed). Thus, bail out here.
- */
- if (!priv || !priv->qi_present) {
- err = -ENODEV;
- goto out_put_dev;
- }
-
if (caam_dpaa2) {
dev_info(ctrldev, "caam/qi frontend driver not suitable for DPAA 2.x, aborting...\n");
- err = -ENODEV;
- goto out_put_dev;
+ return -ENODEV;
}
/*
@@ -2685,14 +2657,5 @@ static int __init caam_qi_algapi_init(void)
if (registered)
dev_info(priv->qidev, "algorithms registered in /proc/crypto\n");
-out_put_dev:
- put_device(ctrldev);
return err;
}
-
-module_init(caam_qi_algapi_init);
-module_exit(caam_qi_algapi_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Support for crypto API using CAAM-QI backend");
-MODULE_AUTHOR("Freescale Semiconductor");
@@ -1934,7 +1934,7 @@ static void caam_hash_cra_exit(struct crypto_tfm *tfm)
caam_jr_free(ctx->jrdev);
}
-static void __exit caam_algapi_hash_exit(void)
+void caam_algapi_hash_exit(void)
{
struct caam_hash_alg *t_alg, *n;
@@ -1992,40 +1992,13 @@ caam_hash_alloc(struct caam_hash_template *template,
return t_alg;
}
-static int __init caam_algapi_hash_init(void)
+int caam_algapi_hash_init(struct device *ctrldev)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
int i = 0, err = 0;
- struct caam_drv_private *priv;
+ struct caam_drv_private *priv = dev_get_drvdata(ctrldev);
unsigned int md_limit = SHA512_DIGEST_SIZE;
u32 md_inst, md_vid;
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return -ENODEV;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev) {
- of_node_put(dev_node);
- return -ENODEV;
- }
-
- priv = dev_get_drvdata(&pdev->dev);
- of_node_put(dev_node);
-
- /*
- * If priv is NULL, it's probably because the caam driver wasn't
- * properly initialized (e.g. RNG4 init failed). Thus, bail out here.
- */
- if (!priv) {
- err = -ENODEV;
- goto out_put_dev;
- }
-
/*
* Register crypto algorithms the device supports. First, identify
* presence and attributes of MD block.
@@ -2046,10 +2019,8 @@ static int __init caam_algapi_hash_init(void)
* Skip registration of any hashing algorithms if MD block
* is not present.
*/
- if (!md_inst) {
- err = -ENODEV;
- goto out_put_dev;
- }
+ if (!md_inst)
+ return -ENODEV;
/* Limit digest size based on LP256 */
if (md_vid == CHA_VER_VID_MD_LP256)
@@ -2106,14 +2077,5 @@ static int __init caam_algapi_hash_init(void)
list_add_tail(&t_alg->entry, &hash_list);
}
-out_put_dev:
- put_device(&pdev->dev);
return err;
}
-
-module_init(caam_algapi_hash_init);
-module_exit(caam_algapi_hash_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("FSL CAAM support for ahash functions of crypto API");
-MODULE_AUTHOR("Freescale Semiconductor - NMG");
@@ -1013,41 +1013,12 @@ static struct akcipher_alg caam_rsa = {
};
/* Public Key Cryptography module initialization handler */
-static int __init caam_pkc_init(void)
+int caam_pkc_init(struct device *ctrldev)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct device *ctrldev;
- struct caam_drv_private *priv;
+ struct caam_drv_private *priv = dev_get_drvdata(ctrldev);
u32 pk_inst;
int err;
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return -ENODEV;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev) {
- of_node_put(dev_node);
- return -ENODEV;
- }
-
- ctrldev = &pdev->dev;
- priv = dev_get_drvdata(ctrldev);
- of_node_put(dev_node);
-
- /*
- * If priv is NULL, it's probably because the caam driver wasn't
- * properly initialized (e.g. RNG4 init failed). Thus, bail out here.
- */
- if (!priv) {
- err = -ENODEV;
- goto out_put_dev;
- }
-
/* Determine public key hardware accelerator presence. */
if (priv->era < 10)
pk_inst = (rd_reg32(&priv->ctrl->perfmon.cha_num_ls) &
@@ -1056,10 +1027,8 @@ static int __init caam_pkc_init(void)
pk_inst = rd_reg32(&priv->ctrl->vreg.pkha) & CHA_VER_NUM_MASK;
/* Do not register algorithms if PKHA is not present. */
- if (!pk_inst) {
- err = -ENODEV;
- goto out_put_dev;
- }
+ if (!pk_inst)
+ return 0;
err = crypto_register_akcipher(&caam_rsa);
if (err)
@@ -1068,19 +1037,10 @@ static int __init caam_pkc_init(void)
else
dev_info(ctrldev, "caam pkc algorithms registered in /proc/crypto\n");
-out_put_dev:
- put_device(ctrldev);
return err;
}
-static void __exit caam_pkc_exit(void)
+void caam_pkc_exit(void)
{
crypto_unregister_akcipher(&caam_rsa);
}
-
-module_init(caam_pkc_init);
-module_exit(caam_pkc_exit);
-
-MODULE_LICENSE("Dual BSD/GPL");
-MODULE_DESCRIPTION("FSL CAAM support for PKC functions of crypto API");
-MODULE_AUTHOR("Freescale Semiconductor");
@@ -3,7 +3,7 @@
* caam - Freescale FSL CAAM support for hw_random
*
* Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
+ * Copyright 2018-2019 NXP
*
* Based on caamalg.c crypto API driver.
*
@@ -296,47 +296,20 @@ static struct hwrng caam_rng = {
.read = caam_read,
};
-static void __exit caam_rng_exit(void)
+void caam_rng_exit(void)
{
caam_jr_free(rng_ctx->jrdev);
hwrng_unregister(&caam_rng);
kfree(rng_ctx);
}
-static int __init caam_rng_init(void)
+int caam_rng_init(struct device *ctrldev)
{
struct device *dev;
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct caam_drv_private *priv;
u32 rng_inst;
+ struct caam_drv_private *priv = dev_get_drvdata(ctrldev);
int err;
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return -ENODEV;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev) {
- of_node_put(dev_node);
- return -ENODEV;
- }
-
- priv = dev_get_drvdata(&pdev->dev);
- of_node_put(dev_node);
-
- /*
- * If priv is NULL, it's probably because the caam driver wasn't
- * properly initialized (e.g. RNG4 init failed). Thus, bail out here.
- */
- if (!priv) {
- err = -ENODEV;
- goto out_put_dev;
- }
-
/* Check for an instantiated RNG before registration */
if (priv->era < 10)
rng_inst = (rd_reg32(&priv->ctrl->perfmon.cha_num_ls) &
@@ -344,16 +317,13 @@ static int __init caam_rng_init(void)
else
rng_inst = rd_reg32(&priv->ctrl->vreg.rng) & CHA_VER_NUM_MASK;
- if (!rng_inst) {
- err = -ENODEV;
- goto out_put_dev;
- }
+ if (!rng_inst)
+ return 0;
dev = caam_jr_alloc();
if (IS_ERR(dev)) {
pr_err("Job Ring Device allocation for transform failed\n");
- err = PTR_ERR(dev);
- goto out_put_dev;
+ return PTR_ERR(dev);
}
rng_ctx = kmalloc(sizeof(*rng_ctx), GFP_DMA | GFP_KERNEL);
if (!rng_ctx) {
@@ -364,7 +334,6 @@ static int __init caam_rng_init(void)
if (err)
goto free_rng_ctx;
- put_device(&pdev->dev);
dev_info(dev, "registering rng-caam\n");
return hwrng_register(&caam_rng);
@@ -372,14 +341,5 @@ static int __init caam_rng_init(void)
kfree(rng_ctx);
free_caam_alloc:
caam_jr_free(dev);
-out_put_dev:
- put_device(&pdev->dev);
return err;
}
-
-module_init(caam_rng_init);
-module_exit(caam_rng_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("FSL CAAM support for hw_random API");
-MODULE_AUTHOR("Freescale Semiconductor - NMG");
@@ -3,7 +3,7 @@
* Controller-level driver, kernel property detection, initialization
*
* Copyright 2008-2012 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
+ * Copyright 2018-2019 NXP
*/
#include <linux/device.h>
@@ -703,12 +703,6 @@ static int caam_probe(struct platform_device *pdev)
ctrlpriv->era = caam_get_era(ctrl);
- ret = of_platform_populate(nprop, caam_match, NULL, dev);
- if (ret) {
- dev_err(dev, "JR platform devices creation error\n");
- goto iounmap_ctrl;
- }
-
#ifdef CONFIG_DEBUG_FS
/*
* FIXME: needs better naming distinction, as some amalgamation of
@@ -721,19 +715,6 @@ static int caam_probe(struct platform_device *pdev)
ctrlpriv->ctl = debugfs_create_dir("ctl", ctrlpriv->dfs_root);
#endif
- ring = 0;
- for_each_available_child_of_node(nprop, np)
- if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") ||
- of_device_is_compatible(np, "fsl,sec4.0-job-ring")) {
- ctrlpriv->jr[ring] = (struct caam_job_ring __iomem __force *)
- ((__force uint8_t *)ctrl +
- (ring + JR_BLOCK_NUMBER) *
- BLOCK_OFFSET
- );
- ctrlpriv->total_jobrs++;
- ring++;
- }
-
/* Check to see if (DPAA 1.x) QI present. If so, enable */
ctrlpriv->qi_present = !!(comp_params & CTPR_MS_QI_MASK);
if (ctrlpriv->qi_present && !caam_dpaa2) {
@@ -752,6 +733,25 @@ static int caam_probe(struct platform_device *pdev)
#endif
}
+ ret = of_platform_populate(nprop, caam_match, NULL, dev);
+ if (ret) {
+ dev_err(dev, "JR platform devices creation error\n");
+ goto shutdown_qi;
+ }
+
+ ring = 0;
+ for_each_available_child_of_node(nprop, np)
+ if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") ||
+ of_device_is_compatible(np, "fsl,sec4.0-job-ring")) {
+ ctrlpriv->jr[ring] = (struct caam_job_ring __iomem __force *)
+ ((__force uint8_t *)ctrl +
+ (ring + JR_BLOCK_NUMBER) *
+ BLOCK_OFFSET
+ );
+ ctrlpriv->total_jobrs++;
+ ring++;
+ }
+
/* If no QI and no rings specified, quit and go home */
if ((!ctrlpriv->qi_present) && (!ctrlpriv->total_jobrs)) {
dev_err(dev, "no queues configured, terminating\n");
@@ -898,6 +898,11 @@ static int caam_probe(struct platform_device *pdev)
caam_remove(pdev);
return ret;
+shutdown_qi:
+#ifdef CONFIG_CAAM_QI
+ if (ctrlpriv->qidev)
+ caam_qi_shutdown(ctrlpriv->qidev);
+#endif
iounmap_ctrl:
iounmap(ctrl);
disable_caam_emi_slow:
@@ -4,7 +4,7 @@
* Private/internal definitions between modules
*
* Copyright 2008-2011 Freescale Semiconductor, Inc.
- *
+ * Copyright 2019 NXP
*/
#ifndef INTERN_H
@@ -107,8 +107,95 @@ struct caam_drv_private {
#endif
};
-void caam_jr_algapi_init(struct device *dev);
-void caam_jr_algapi_remove(struct device *dev);
+#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API
+
+int caam_algapi_init(struct device *dev);
+void caam_algapi_exit(void);
+
+#else
+
+static inline int caam_algapi_init(struct device *dev)
+{
+ return 0;
+}
+
+static inline void caam_algapi_exit(void)
+{
+}
+
+#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API */
+
+#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API
+
+int caam_algapi_hash_init(struct device *dev);
+void caam_algapi_hash_exit(void);
+
+#else
+
+static inline int caam_algapi_hash_init(struct device *dev)
+{
+ return 0;
+}
+
+static inline void caam_algapi_hash_exit(void)
+{
+}
+
+#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API */
+
+#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API
+
+int caam_pkc_init(struct device *dev);
+void caam_pkc_exit(void);
+
+#else
+
+static inline int caam_pkc_init(struct device *dev)
+{
+ return 0;
+}
+
+static inline void caam_pkc_exit(void)
+{
+}
+
+#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API */
+
+#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API
+
+int caam_rng_init(struct device *dev);
+void caam_rng_exit(void);
+
+#else
+
+static inline int caam_rng_init(struct device *dev)
+{
+ return 0;
+}
+
+static inline void caam_rng_exit(void)
+{
+}
+
+#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API */
+
+#ifdef CONFIG_CAAM_QI
+
+int caam_qi_algapi_init(struct device *dev);
+void caam_qi_algapi_exit(void);
+
+#else
+
+static inline int caam_qi_algapi_init(struct device *dev)
+{
+ return 0;
+}
+
+static inline void caam_qi_algapi_exit(void)
+{
+}
+
+#endif /* CONFIG_CAAM_QI */
#ifdef CONFIG_DEBUG_FS
static int caam_debugfs_u64_get(void *data, u64 *val)
@@ -4,6 +4,7 @@
* JobR backend functionality
*
* Copyright 2008-2012 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
*/
#include <linux/of_irq.h>
@@ -23,6 +24,43 @@ struct jr_driver_data {
} ____cacheline_aligned;
static struct jr_driver_data driver_data;
+static DEFINE_MUTEX(algs_lock);
+static unsigned int active_devs;
+
+static void register_algs(struct device *dev)
+{
+ mutex_lock(&algs_lock);
+
+ if (++active_devs != 1)
+ goto algs_unlock;
+
+ caam_algapi_init(dev);
+ caam_algapi_hash_init(dev);
+ caam_pkc_init(dev);
+ caam_rng_init(dev);
+ caam_qi_algapi_init(dev);
+
+algs_unlock:
+ mutex_unlock(&algs_lock);
+}
+
+static void unregister_algs(void)
+{
+ mutex_lock(&algs_lock);
+
+ if (--active_devs != 0)
+ goto algs_unlock;
+
+ caam_qi_algapi_exit();
+
+ caam_rng_exit();
+ caam_pkc_exit();
+ caam_algapi_hash_exit();
+ caam_algapi_exit();
+
+algs_unlock:
+ mutex_unlock(&algs_lock);
+}
static int caam_reset_hw_jr(struct device *dev)
{
@@ -109,6 +147,9 @@ static int caam_jr_remove(struct platform_device *pdev)
return -EBUSY;
}
+ /* Unregister JR-based RNG & crypto algorithms */
+ unregister_algs();
+
/* Remove the node from Physical JobR list maintained by driver */
spin_lock(&driver_data.jr_alloc_lock);
list_del(&jrpriv->list_node);
@@ -541,6 +582,8 @@ static int caam_jr_probe(struct platform_device *pdev)
atomic_set(&jrpriv->tfm_count, 0);
+ register_algs(jrdev->parent);
+
return 0;
}
Currently we allow top level code, i.e. that which sits between the low level (HW-specific) drivers and crypto API, to be built as several drivers: caamalg, caamhash, caam_pkc, caamrng, caamalg_qi. There is no advantage in this, more it interferes with adding support for deferred probing (there are no corresponding devices and thus no bus). Convert these drivers and call init() / exit() manually at the right time. Move algorithms initialization at JR probe / remove time: -the first probed JR registers the crypto algs -the last removed JR unregisters the crypto algs Note: caam_qi_init() is called before JR platform devices creation (of_populate_bus()), such that QI interface is initialized when the caam/qi algorithms are registered in the JR driver (by calling caam_qi_algapi_init(). While here, fix the Kconfig entries under CRYPTO_DEV_FSL_CAAM_JR to be aligned. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> --- drivers/crypto/caam/Kconfig | 46 ++++++---------- drivers/crypto/caam/Makefile | 18 +++---- drivers/crypto/caam/caamalg.c | 43 ++------------- drivers/crypto/caam/caamalg_qi.c | 45 ++-------------- drivers/crypto/caam/caamhash.c | 48 ++--------------- drivers/crypto/caam/caampkc.c | 50 ++--------------- drivers/crypto/caam/caamrng.c | 54 +++---------------- drivers/crypto/caam/ctrl.c | 45 +++++++++------- drivers/crypto/caam/intern.h | 93 ++++++++++++++++++++++++++++++-- drivers/crypto/caam/jr.c | 43 +++++++++++++++ 10 files changed, 208 insertions(+), 277 deletions(-)