@@ -35,3 +35,13 @@ config CRYPTO_DEV_OCTEONTX_CPT
To compile this driver as module, choose M here:
the modules will be called octeontx-cpt and octeontx-cptvf
+
+config CRYPTO_DEV_OCTEONTX2_CPT
+ tristate "Marvell OcteonTX2 CPT driver"
+ depends on ARM64 || COMPILE_TEST
+ depends on PCI_MSI && 64BIT
+ select OCTEONTX2_MBOX
+ select CRYPTO_DEV_MARVELL
+ help
+ This driver allows you to utilize the Marvell Cryptographic
+ Accelerator Unit(CPT) found in OcteonTX2 series of processors.
@@ -2,3 +2,4 @@
obj-$(CONFIG_CRYPTO_DEV_MARVELL_CESA) += cesa/
obj-$(CONFIG_CRYPTO_DEV_OCTEONTX_CPT) += octeontx/
+obj-$(CONFIG_CRYPTO_DEV_OCTEONTX2_CPT) += octeontx2/
new file mode 100644
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CRYPTO_DEV_OCTEONTX2_CPT) += octeontx2-cpt.o
+
+octeontx2-cpt-objs := otx2_cptpf_main.o
+
+ccflags-y += -I$(srctree)/drivers/net/ethernet/marvell/octeontx2/af
new file mode 100644
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-only
+ * Copyright (C) 2020 Marvell.
+ */
+
+#ifndef __OTX2_CPT_COMMON_H
+#define __OTX2_CPT_COMMON_H
+
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/crypto.h>
+#include "otx2_cpt_hw_types.h"
+#include "rvu.h"
+
+#define OTX2_CPT_RVU_FUNC_ADDR_S(blk, slot, offs) \
+ (((blk) << 20) | ((slot) << 12) | (offs))
+
+static inline void otx2_cpt_write64(void __iomem *reg_base, u64 blk, u64 slot,
+ u64 offs, u64 val)
+{
+ writeq_relaxed(val, reg_base +
+ OTX2_CPT_RVU_FUNC_ADDR_S(blk, slot, offs));
+}
+
+static inline u64 otx2_cpt_read64(void __iomem *reg_base, u64 blk, u64 slot,
+ u64 offs)
+{
+ return readq_relaxed(reg_base +
+ OTX2_CPT_RVU_FUNC_ADDR_S(blk, slot, offs));
+}
+#endif /* __OTX2_CPT_COMMON_H */
new file mode 100644
@@ -0,0 +1,464 @@
+/* SPDX-License-Identifier: GPL-2.0-only
+ * Copyright (C) 2020 Marvell.
+ */
+
+#ifndef __OTX2_CPT_HW_TYPES_H
+#define __OTX2_CPT_HW_TYPES_H
+
+#include <linux/types.h>
+
+/* Device IDs */
+#define OTX2_CPT_PCI_PF_DEVICE_ID 0xA0FD
+#define OTX2_CPT_PCI_VF_DEVICE_ID 0xA0FE
+
+/* Mailbox interrupts offset */
+#define OTX2_CPT_PF_MBOX_INT 6
+#define OTX2_CPT_PF_INT_VEC_E_MBOXX(x, a) ((x) + (a))
+
+/* Maximum supported microcode groups */
+#define OTX2_CPT_MAX_ENGINE_GROUPS 8
+
+/* CPT instruction size in bytes */
+#define OTX2_CPT_INST_SIZE 64
+/*
+ * CPT VF MSIX vectors and their offsets
+ */
+#define OTX2_CPT_VF_MSIX_VECTORS 1
+#define OTX2_CPT_VF_INTR_MBOX_MASK BIT(0)
+
+/* CPT LF MSIX vectors */
+#define OTX2_CPT_LF_MSIX_VECTORS 2
+
+/* OcteonTX2 CPT PF registers */
+#define OTX2_CPT_PF_CONSTANTS (0x0)
+#define OTX2_CPT_PF_RESET (0x100)
+#define OTX2_CPT_PF_DIAG (0x120)
+#define OTX2_CPT_PF_BIST_STATUS (0x160)
+#define OTX2_CPT_PF_ECC0_CTL (0x200)
+#define OTX2_CPT_PF_ECC0_FLIP (0x210)
+#define OTX2_CPT_PF_ECC0_INT (0x220)
+#define OTX2_CPT_PF_ECC0_INT_W1S (0x230)
+#define OTX2_CPT_PF_ECC0_ENA_W1S (0x240)
+#define OTX2_CPT_PF_ECC0_ENA_W1C (0x250)
+#define OTX2_CPT_PF_MBOX_INTX(b) (0x400 | (b) << 3)
+#define OTX2_CPT_PF_MBOX_INT_W1SX(b) (0x420 | (b) << 3)
+#define OTX2_CPT_PF_MBOX_ENA_W1CX(b) (0x440 | (b) << 3)
+#define OTX2_CPT_PF_MBOX_ENA_W1SX(b) (0x460 | (b) << 3)
+#define OTX2_CPT_PF_EXEC_INT (0x500)
+#define OTX2_CPT_PF_EXEC_INT_W1S (0x520)
+#define OTX2_CPT_PF_EXEC_ENA_W1C (0x540)
+#define OTX2_CPT_PF_EXEC_ENA_W1S (0x560)
+#define OTX2_CPT_PF_GX_EN(b) (0x600 | (b) << 3)
+#define OTX2_CPT_PF_EXEC_INFO (0x700)
+#define OTX2_CPT_PF_EXEC_BUSY (0x800)
+#define OTX2_CPT_PF_EXEC_INFO0 (0x900)
+#define OTX2_CPT_PF_EXEC_INFO1 (0x910)
+#define OTX2_CPT_PF_INST_REQ_PC (0x10000)
+#define OTX2_CPT_PF_INST_LATENCY_PC (0x10020)
+#define OTX2_CPT_PF_RD_REQ_PC (0x10040)
+#define OTX2_CPT_PF_RD_LATENCY_PC (0x10060)
+#define OTX2_CPT_PF_RD_UC_PC (0x10080)
+#define OTX2_CPT_PF_ACTIVE_CYCLES_PC (0x10100)
+#define OTX2_CPT_PF_EXE_CTL (0x4000000)
+#define OTX2_CPT_PF_EXE_STATUS (0x4000008)
+#define OTX2_CPT_PF_EXE_CLK (0x4000010)
+#define OTX2_CPT_PF_EXE_DBG_CTL (0x4000018)
+#define OTX2_CPT_PF_EXE_DBG_DATA (0x4000020)
+#define OTX2_CPT_PF_EXE_BIST_STATUS (0x4000028)
+#define OTX2_CPT_PF_EXE_REQ_TIMER (0x4000030)
+#define OTX2_CPT_PF_EXE_MEM_CTL (0x4000038)
+#define OTX2_CPT_PF_EXE_PERF_CTL (0x4001000)
+#define OTX2_CPT_PF_EXE_DBG_CNTX(b) (0x4001100 | (b) << 3)
+#define OTX2_CPT_PF_EXE_PERF_EVENT_CNT (0x4001180)
+#define OTX2_CPT_PF_EXE_EPCI_INBX_CNT(b) (0x4001200 | (b) << 3)
+#define OTX2_CPT_PF_EXE_EPCI_OUTBX_CNT(b) (0x4001240 | (b) << 3)
+#define OTX2_CPT_PF_ENGX_UCODE_BASE(b) (0x4002000 | (b) << 3)
+#define OTX2_CPT_PF_QX_CTL(b) (0x8000000 | (b) << 20)
+#define OTX2_CPT_PF_QX_GMCTL(b) (0x8000020 | (b) << 20)
+#define OTX2_CPT_PF_QX_CTL2(b) (0x8000100 | (b) << 20)
+#define OTX2_CPT_PF_VFX_MBOXX(b, c) (0x8001000 | (b) << 20 | \
+ (c) << 8)
+
+/* OcteonTX2 CPT LF registers */
+#define OTX2_CPT_LF_CTL (0x10)
+#define OTX2_CPT_LF_DONE_WAIT (0x30)
+#define OTX2_CPT_LF_INPROG (0x40)
+#define OTX2_CPT_LF_DONE (0x50)
+#define OTX2_CPT_LF_DONE_ACK (0x60)
+#define OTX2_CPT_LF_DONE_INT_ENA_W1S (0x90)
+#define OTX2_CPT_LF_DONE_INT_ENA_W1C (0xa0)
+#define OTX2_CPT_LF_MISC_INT (0xb0)
+#define OTX2_CPT_LF_MISC_INT_W1S (0xc0)
+#define OTX2_CPT_LF_MISC_INT_ENA_W1S (0xd0)
+#define OTX2_CPT_LF_MISC_INT_ENA_W1C (0xe0)
+#define OTX2_CPT_LF_Q_BASE (0xf0)
+#define OTX2_CPT_LF_Q_SIZE (0x100)
+#define OTX2_CPT_LF_Q_INST_PTR (0x110)
+#define OTX2_CPT_LF_Q_GRP_PTR (0x120)
+#define OTX2_CPT_LF_NQX(a) (0x400 | (a) << 3)
+#define OTX2_CPT_RVU_FUNC_BLKADDR_SHIFT 20
+/* LMT LF registers */
+#define OTX2_CPT_LMT_LFBASE BIT_ULL(OTX2_CPT_RVU_FUNC_BLKADDR_SHIFT)
+#define OTX2_CPT_LMT_LF_LMTLINEX(a) (OTX2_CPT_LMT_LFBASE | 0x000 | \
+ (a) << 12)
+/* RVU VF registers */
+#define OTX2_RVU_VF_INT (0x20)
+#define OTX2_RVU_VF_INT_W1S (0x28)
+#define OTX2_RVU_VF_INT_ENA_W1S (0x30)
+#define OTX2_RVU_VF_INT_ENA_W1C (0x38)
+
+/*
+ * Enumeration otx2_cpt_ucode_error_code_e
+ *
+ * Enumerates ucode errors
+ */
+enum otx2_cpt_ucode_comp_code_e {
+ OTX2_CPT_UCC_SUCCESS = 0x00,
+ OTX2_CPT_UCC_INVALID_OPCODE = 0x01,
+
+ /* Scatter gather */
+ OTX2_CPT_UCC_SG_WRITE_LENGTH = 0x02,
+ OTX2_CPT_UCC_SG_LIST = 0x03,
+ OTX2_CPT_UCC_SG_NOT_SUPPORTED = 0x04,
+
+};
+
+/*
+ * Enumeration otx2_cpt_comp_e
+ *
+ * OcteonTX2 CPT Completion Enumeration
+ * Enumerates the values of CPT_RES_S[COMPCODE].
+ */
+enum otx2_cpt_comp_e {
+ OTX2_CPT_COMP_E_NOTDONE = 0x00,
+ OTX2_CPT_COMP_E_GOOD = 0x01,
+ OTX2_CPT_COMP_E_FAULT = 0x02,
+ OTX2_CPT_COMP_E_HWERR = 0x04,
+ OTX2_CPT_COMP_E_INSTERR = 0x05,
+ OTX2_CPT_COMP_E_LAST_ENTRY = 0x06
+};
+
+/*
+ * Enumeration otx2_cpt_vf_int_vec_e
+ *
+ * OcteonTX2 CPT VF MSI-X Vector Enumeration
+ * Enumerates the MSI-X interrupt vectors.
+ */
+enum otx2_cpt_vf_int_vec_e {
+ OTX2_CPT_VF_INT_VEC_E_MBOX = 0x00
+};
+
+/*
+ * Enumeration otx2_cpt_lf_int_vec_e
+ *
+ * OcteonTX2 CPT LF MSI-X Vector Enumeration
+ * Enumerates the MSI-X interrupt vectors.
+ */
+enum otx2_cpt_lf_int_vec_e {
+ OTX2_CPT_LF_INT_VEC_E_MISC = 0x00,
+ OTX2_CPT_LF_INT_VEC_E_DONE = 0x01
+};
+
+/*
+ * Structure otx2_cpt_inst_s
+ *
+ * CPT Instruction Structure
+ * This structure specifies the instruction layout. Instructions are
+ * stored in memory as little-endian unless CPT()_PF_Q()_CTL[INST_BE] is set.
+ * cpt_inst_s_s
+ * Word 0
+ * doneint:1 Done interrupt.
+ * 0 = No interrupts related to this instruction.
+ * 1 = When the instruction completes, CPT()_VQ()_DONE[DONE] will be
+ * incremented,and based on the rules described there an interrupt may
+ * occur.
+ * Word 1
+ * res_addr [127: 64] Result IOVA.
+ * If nonzero, specifies where to write CPT_RES_S.
+ * If zero, no result structure will be written.
+ * Address must be 16-byte aligned.
+ * Bits <63:49> are ignored by hardware; software should use a
+ * sign-extended bit <48> for forward compatibility.
+ * Word 2
+ * grp:10 [171:162] If [WQ_PTR] is nonzero, the SSO guest-group to use when
+ * CPT submits work SSO.
+ * For the SSO to not discard the add-work request, FPA_PF_MAP() must map
+ * [GRP] and CPT()_PF_Q()_GMCTL[GMID] as valid.
+ * tt:2 [161:160] If [WQ_PTR] is nonzero, the SSO tag type to use when CPT
+ * submits work to SSO
+ * tag:32 [159:128] If [WQ_PTR] is nonzero, the SSO tag to use when CPT
+ * submits work to SSO.
+ * Word 3
+ * wq_ptr [255:192] If [WQ_PTR] is nonzero, it is a pointer to a
+ * work-queue entry that CPT submits work to SSO after all context,
+ * output data, and result write operations are visible to other
+ * CNXXXX units and the cores. Bits <2:0> must be zero.
+ * Bits <63:49> are ignored by hardware; software should
+ * use a sign-extended bit <48> for forward compatibility.
+ * Internal:
+ * Bits <63:49>, <2:0> are ignored by hardware, treated as always 0x0.
+ * Word 4
+ * ei0; [319:256] Engine instruction word 0. Passed to the AE/SE.
+ * Word 5
+ * ei1; [383:320] Engine instruction word 1. Passed to the AE/SE.
+ * Word 6
+ * ei2; [447:384] Engine instruction word 1. Passed to the AE/SE.
+ * Word 7
+ * ei3; [511:448] Engine instruction word 1. Passed to the AE/SE.
+ *
+ */
+union otx2_cpt_inst_s {
+ u64 u[8];
+
+ struct {
+ /* Word 0 */
+ u64 nixtxl:3;
+ u64 doneint:1;
+ u64 nixtx_addr:60;
+ /* Word 1 */
+ u64 res_addr;
+ /* Word 2 */
+ u64 tag:32;
+ u64 tt:2;
+ u64 grp:10;
+ u64 reserved_172_175:4;
+ u64 rvu_pf_func:16;
+ /* Word 3 */
+ u64 qord:1;
+ u64 reserved_194_193:2;
+ u64 wq_ptr:61;
+ /* Word 4 */
+ u64 ei0;
+ /* Word 5 */
+ u64 ei1;
+ /* Word 6 */
+ u64 ei2;
+ /* Word 7 */
+ u64 ei3;
+ } s;
+};
+
+/*
+ * Structure otx2_cpt_res_s
+ *
+ * CPT Result Structure
+ * The CPT coprocessor writes the result structure after it completes a
+ * CPT_INST_S instruction. The result structure is exactly 16 bytes, and
+ * each instruction completion produces exactly one result structure.
+ *
+ * This structure is stored in memory as little-endian unless
+ * CPT()_PF_Q()_CTL[INST_BE] is set.
+ * cpt_res_s_s
+ * Word 0
+ * doneint:1 [16:16] Done interrupt. This bit is copied from the
+ * corresponding instruction's CPT_INST_S[DONEINT].
+ * compcode:8 [7:0] Indicates completion/error status of the CPT coprocessor
+ * for the associated instruction, as enumerated by CPT_COMP_E.
+ * Core software may write the memory location containing [COMPCODE] to
+ * 0x0 before ringing the doorbell, and then poll for completion by
+ * checking for a nonzero value.
+ * Once the core observes a nonzero [COMPCODE] value in this case,the CPT
+ * coprocessor will have also completed L2/DRAM write operations.
+ * Word 1
+ * reserved
+ *
+ */
+union otx2_cpt_res_s {
+ u64 u[2];
+
+ struct {
+ u64 compcode:8;
+ u64 uc_compcode:8;
+ u64 doneint:1;
+ u64 reserved_17_63:47;
+ u64 reserved_64_127;
+ } s;
+};
+
+/*
+ * Register (RVU_PF_BAR0) cpt#_af_constants1
+ *
+ * CPT AF Constants Register
+ * This register contains implementation-related parameters of CPT.
+ */
+union otx2_cptx_af_constants1 {
+ u64 u;
+ struct otx2_cptx_af_constants1_s {
+ u64 se:16;
+ u64 ie:16;
+ u64 ae:16;
+ u64 reserved_48_63:16;
+ } s;
+};
+
+/*
+ * RVU_PFVF_BAR2 - cpt_lf_misc_int
+ *
+ * This register contain the per-queue miscellaneous interrupts.
+ *
+ */
+union otx2_cptx_lf_misc_int {
+ u64 u;
+ struct otx2_cptx_lf_misc_int_s {
+ u64 reserved_0:1;
+ u64 nqerr:1;
+ u64 irde:1;
+ u64 nwrp:1;
+ u64 reserved_4:1;
+ u64 hwerr:1;
+ u64 fault:1;
+ u64 reserved_7_63:57;
+ } s;
+};
+
+/*
+ * RVU_PFVF_BAR2 - cpt_lf_misc_int_ena_w1s
+ *
+ * This register sets interrupt enable bits.
+ *
+ */
+union otx2_cptx_lf_misc_int_ena_w1s {
+ u64 u;
+ struct otx2_cptx_lf_misc_int_ena_w1s_s {
+ u64 reserved_0:1;
+ u64 nqerr:1;
+ u64 irde:1;
+ u64 nwrp:1;
+ u64 reserved_4:1;
+ u64 hwerr:1;
+ u64 fault:1;
+ u64 reserved_7_63:57;
+ } s;
+};
+
+/*
+ * RVU_PFVF_BAR2 - cpt_lf_ctl
+ *
+ * This register configures the queue.
+ *
+ * When the queue is not execution-quiescent (see CPT_LF_INPROG[EENA,INFLIGHT]),
+ * software must only write this register with [ENA]=0.
+ */
+union otx2_cptx_lf_ctl {
+ u64 u;
+ struct otx2_cptx_lf_ctl_s {
+ u64 ena:1;
+ u64 fc_ena:1;
+ u64 fc_up_crossing:1;
+ u64 reserved_3:1;
+ u64 fc_hyst_bits:4;
+ u64 reserved_8_63:56;
+ } s;
+};
+
+/*
+ * RVU_PFVF_BAR2 - cpt_lf_done_wait
+ *
+ * This register specifies the per-queue interrupt coalescing settings.
+ */
+union otx2_cptx_lf_done_wait {
+ u64 u;
+ struct otx2_cptx_lf_done_wait_s {
+ u64 num_wait:20;
+ u64 reserved_20_31:12;
+ u64 time_wait:16;
+ u64 reserved_48_63:16;
+ } s;
+};
+
+/*
+ * RVU_PFVF_BAR2 - cpt_lf_done
+ *
+ * This register contain the per-queue instruction done count.
+ */
+union otx2_cptx_lf_done {
+ u64 u;
+ struct otx2_cptx_lf_done_s {
+ u64 done:20;
+ u64 reserved_20_63:44;
+ } s;
+};
+
+/*
+ * RVU_PFVF_BAR2 - cpt_lf_inprog
+ *
+ * These registers contain the per-queue instruction in flight registers.
+ *
+ */
+union otx2_cptx_lf_inprog {
+ u64 u;
+ struct otx2_cptx_lf_inprog_s {
+ u64 inflight:9;
+ u64 reserved_9_15:7;
+ u64 eena:1;
+ u64 grp_drp:1;
+ u64 reserved_18_30:13;
+ u64 grb_partial:1;
+ u64 grb_cnt:8;
+ u64 gwb_cnt:8;
+ u64 reserved_48_63:16;
+ } s;
+};
+
+/*
+ * RVU_PFVF_BAR2 - cpt_lf_q_base
+ *
+ * CPT initializes these CSR fields to these values on any CPT_LF_Q_BASE write:
+ * _ CPT_LF_Q_INST_PTR[XQ_XOR]=0.
+ * _ CPT_LF_Q_INST_PTR[NQ_PTR]=2.
+ * _ CPT_LF_Q_INST_PTR[DQ_PTR]=2.
+ * _ CPT_LF_Q_GRP_PTR[XQ_XOR]=0.
+ * _ CPT_LF_Q_GRP_PTR[NQ_PTR]=1.
+ * _ CPT_LF_Q_GRP_PTR[DQ_PTR]=1.
+ */
+union otx2_cptx_lf_q_base {
+ u64 u;
+ struct otx2_cptx_lf_q_base_s {
+ u64 fault:1;
+ u64 reserved_1_6:6;
+ u64 addr:46;
+ u64 reserved_53_63:11;
+ } s;
+};
+
+/*
+ * RVU_PFVF_BAR2 - cpt_lf_q_size
+ *
+ * CPT initializes these CSR fields to these values on any CPT_LF_Q_SIZE write:
+ * _ CPT_LF_Q_INST_PTR[XQ_XOR]=0.
+ * _ CPT_LF_Q_INST_PTR[NQ_PTR]=2.
+ * _ CPT_LF_Q_INST_PTR[DQ_PTR]=2.
+ * _ CPT_LF_Q_GRP_PTR[XQ_XOR]=0.
+ * _ CPT_LF_Q_GRP_PTR[NQ_PTR]=1.
+ * _ CPT_LF_Q_GRP_PTR[DQ_PTR]=1.
+ */
+union otx2_cptx_lf_q_size {
+ u64 u;
+ struct otx2_cptx_lf_q_size_s {
+ u64 size_div40:15;
+ u64 reserved_15_63:49;
+ } s;
+};
+
+/*
+ * RVU_PF_BAR0 - cpt_af_lf_ctl
+ *
+ * This register configures queues. This register should be written only
+ * when the queue is execution-quiescent (see CPT_LF_INPROG[INFLIGHT]).
+ */
+union otx2_cptx_af_lf_ctrl {
+ u64 u;
+ struct otx2_cptx_af_lf_ctrl_s {
+ u64 pri:1;
+ u64 reserved_1_8:8;
+ u64 pf_func_inst:1;
+ u64 cont_err:1;
+ u64 reserved_11_15:5;
+ u64 nixtx_en:1;
+ u64 reserved_17_47:31;
+ u64 grp:8;
+ u64 reserved_56_63:8;
+ } s;
+};
+
+#endif /* __OTX2_CPT_HW_TYPES_H */
new file mode 100644
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only
+ * Copyright (C) 2020 Marvell.
+ */
+
+#ifndef __OTX2_CPTPF_H
+#define __OTX2_CPTPF_H
+
+struct otx2_cptpf_dev {
+ void __iomem *reg_base; /* CPT PF registers start address */
+ struct pci_dev *pdev; /* PCI device handle */
+};
+
+#endif /* __OTX2_CPTPF_H */
new file mode 100644
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (C) 2020 Marvell. */
+
+#include <linux/firmware.h>
+#include "otx2_cpt_hw_types.h"
+#include "otx2_cpt_common.h"
+#include "otx2_cptpf.h"
+#include "rvu_reg.h"
+
+#define OTX2_CPT_DRV_NAME "octeontx2-cpt"
+#define OTX2_CPT_DRV_STRING "Marvell OcteonTX2 CPT Physical Function Driver"
+
+static int cpt_is_pf_usable(struct otx2_cptpf_dev *cptpf)
+{
+ u64 rev;
+
+ rev = otx2_cpt_read64(cptpf->reg_base, BLKADDR_RVUM, 0,
+ RVU_PF_BLOCK_ADDRX_DISC(BLKADDR_RVUM));
+ rev = (rev >> 12) & 0xFF;
+ /*
+ * Check if AF has setup revision for RVUM block, otherwise
+ * driver probe should be deferred until AF driver comes up
+ */
+ if (!rev) {
+ dev_warn(&cptpf->pdev->dev,
+ "AF is not initialized, deferring probe\n");
+ return -EPROBE_DEFER;
+ }
+ return 0;
+}
+
+static int otx2_cptpf_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct device *dev = &pdev->dev;
+ struct otx2_cptpf_dev *cptpf;
+ int err;
+
+ cptpf = devm_kzalloc(dev, sizeof(*cptpf), GFP_KERNEL);
+ if (!cptpf)
+ return -ENOMEM;
+
+ err = pcim_enable_device(pdev);
+ if (err) {
+ dev_err(dev, "Failed to enable PCI device\n");
+ goto clear_drvdata;
+ }
+
+ err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48));
+ if (err) {
+ dev_err(dev, "Unable to get usable DMA configuration\n");
+ goto clear_drvdata;
+ }
+ /* Map PF's configuration registers */
+ err = pcim_iomap_regions_request_all(pdev, 1 << PCI_PF_REG_BAR_NUM,
+ OTX2_CPT_DRV_NAME);
+ if (err) {
+ dev_err(dev, "Couldn't get PCI resources 0x%x\n", err);
+ goto clear_drvdata;
+ }
+ pci_set_master(pdev);
+ pci_set_drvdata(pdev, cptpf);
+ cptpf->pdev = pdev;
+
+ cptpf->reg_base = pcim_iomap_table(pdev)[PCI_PF_REG_BAR_NUM];
+
+ /* Check if AF driver is up, otherwise defer probe */
+ err = cpt_is_pf_usable(cptpf);
+ if (err)
+ goto clear_drvdata;
+
+ return 0;
+
+clear_drvdata:
+ pci_set_drvdata(pdev, NULL);
+ return err;
+}
+
+static void otx2_cptpf_remove(struct pci_dev *pdev)
+{
+ struct otx2_cptpf_dev *cptpf = pci_get_drvdata(pdev);
+
+ if (!cptpf)
+ return;
+
+ pci_set_drvdata(pdev, NULL);
+}
+
+/* Supported devices */
+static const struct pci_device_id otx2_cpt_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, OTX2_CPT_PCI_PF_DEVICE_ID) },
+ { 0, } /* end of table */
+};
+
+static struct pci_driver otx2_cpt_pci_driver = {
+ .name = OTX2_CPT_DRV_NAME,
+ .id_table = otx2_cpt_id_table,
+ .probe = otx2_cptpf_probe,
+ .remove = otx2_cptpf_remove,
+};
+
+module_pci_driver(otx2_cpt_pci_driver);
+
+MODULE_AUTHOR("Marvell");
+MODULE_DESCRIPTION(OTX2_CPT_DRV_STRING);
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(pci, otx2_cpt_id_table);