| Message ID | 20230526192210.3146896-8-bhupesh.sharma@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Herbert Xu |
| Headers | show |
| Series | arm64: qcom: Enable Crypto Engine for a few Qualcomm SoCs | expand |
On 26.05.2023 21:22, Bhupesh Sharma wrote: > Add crypto engine (CE) and CE BAM related nodes and definitions to > 'sm6115.dtsi'. > > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Tested-by: Anders Roxell <anders.roxell@linaro.org> > Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm6115.dtsi | 31 ++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi > index 43f31c1b9d5a..2aa148340277 100644 > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi > @@ -663,6 +663,37 @@ usb_hsphy: phy@1613000 { > status = "disabled"; > }; > > + cryptobam: dma-controller@1b04000 { > + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; > + reg = <0x0 0x01b04000 0x0 0x24000>; > + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&rpmcc RPM_SMD_CE1_CLK>; > + clock-names = "bam_clk"; > + #dma-cells = <1>; > + qcom,ee = <0>; > + qcom,controlled-remotely; > + iommus = <&apps_smmu 0x92 0>, > + <&apps_smmu 0x94 0x11>, > + <&apps_smmu 0x96 0x11>, > + <&apps_smmu 0x98 0x1>, > + <&apps_smmu 0x9F 0>; > + }; > + > + crypto: crypto@1b3a000 { > + compatible = "qcom,sm6115-qce", "qcom,ipq4019-qce", "qcom,qce"; > + reg = <0x0 0x01b3a000 0x0 0x6000>; > + clocks = <&rpmcc RPM_SMD_CE1_CLK>; > + clock-names = "core"; > + > + dmas = <&cryptobam 6>, <&cryptobam 7>; > + dma-names = "rx", "tx"; > + iommus = <&apps_smmu 0x92 0>, > + <&apps_smmu 0x94 0x11>, > + <&apps_smmu 0x96 0x11>, > + <&apps_smmu 0x98 0x1>, > + <&apps_smmu 0x9F 0>; Nit: masks should be hex (0 -> 0x0) and the 0x9F could be lowercase Konrad > + }; > + > qfprom@1b40000 { > compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; > reg = <0x0 0x01b40000 0x0 0x7000>;
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 43f31c1b9d5a..2aa148340277 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -663,6 +663,37 @@ usb_hsphy: phy@1613000 { status = "disabled"; }; + cryptobam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x01b04000 0x0 0x24000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x92 0>, + <&apps_smmu 0x94 0x11>, + <&apps_smmu 0x96 0x11>, + <&apps_smmu 0x98 0x1>, + <&apps_smmu 0x9F 0>; + }; + + crypto: crypto@1b3a000 { + compatible = "qcom,sm6115-qce", "qcom,ipq4019-qce", "qcom,qce"; + reg = <0x0 0x01b3a000 0x0 0x6000>; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x92 0>, + <&apps_smmu 0x94 0x11>, + <&apps_smmu 0x96 0x11>, + <&apps_smmu 0x98 0x1>, + <&apps_smmu 0x9F 0>; + }; + qfprom@1b40000 { compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; reg = <0x0 0x01b40000 0x0 0x7000>;