diff mbox series

[2/2] arm64: dts: qcom: sm6350: Add Crypto Engine

Message ID 20240105-sm6350-qce-v1-2-416e5c7319ac@fairphone.com (mailing list archive)
State Not Applicable
Delegated to: Herbert Xu
Headers show
Series Add Crypto Engine support for SM6350 | expand

Commit Message

Luca Weiss Jan. 5, 2024, 4:15 p.m. UTC
Add crypto engine (CE) and CE BAM related nodes and definitions for this
SoC.

For reference:

  [    2.297419] qcrypto 1dfa000.crypto: Crypto device found, version 5.5.1

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

Comments

Stephan Gerhold Jan. 5, 2024, 4:30 p.m. UTC | #1
On Fri, Jan 05, 2024 at 05:15:44PM +0100, Luca Weiss wrote:
> Add crypto engine (CE) and CE BAM related nodes and definitions for this
> SoC.
> 
> For reference:
> 
>   [    2.297419] qcrypto 1dfa000.crypto: Crypto device found, version 5.5.1
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>  arch/arm64/boot/dts/qcom/sm6350.dtsi | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> index 8fd6f4d03490..516aadbb16bb 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> @@ -1212,6 +1212,37 @@ ufs_mem_phy_lanes: phy@1d87400 {
>  			};
>  		};
>  
> +		cryptobam: dma-controller@1dc4000 {
> +			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> +			reg = <0 0x01dc4000 0 0x24000>;
> +			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +			qcom,ee = <0>;
> +			qcom,controlled-remotely;
> +			num-channels = <16>;
> +			qcom,num-ees = <4>;
> +			iommus = <&apps_smmu 0x432 0x0000>,
> +				 <&apps_smmu 0x438 0x0001>,
> +				 <&apps_smmu 0x43f 0x0000>,
> +				 <&apps_smmu 0x426 0x0011>,
> +				 <&apps_smmu 0x436 0x0011>;

The last two lines look equivalent to me: 0x436 & ~0x0011 = 0x426.

It's also a bit weird that the mask has one more digit than the stream
ID. And ordered numerically (by stream ID, first number) it would be a
bit easier to read. :-)

Thanks,
Stephan
Luca Weiss Feb. 16, 2024, 10:46 a.m. UTC | #2
On Fri Jan 5, 2024 at 5:30 PM CET, Stephan Gerhold wrote:
> On Fri, Jan 05, 2024 at 05:15:44PM +0100, Luca Weiss wrote:
> > Add crypto engine (CE) and CE BAM related nodes and definitions for this
> > SoC.
> > 
> > For reference:
> > 
> >   [    2.297419] qcrypto 1dfa000.crypto: Crypto device found, version 5.5.1
> > 
> > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> > ---
> >  arch/arm64/boot/dts/qcom/sm6350.dtsi | 31 +++++++++++++++++++++++++++++++
> >  1 file changed, 31 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > index 8fd6f4d03490..516aadbb16bb 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > @@ -1212,6 +1212,37 @@ ufs_mem_phy_lanes: phy@1d87400 {
> >  			};
> >  		};
> >  
> > +		cryptobam: dma-controller@1dc4000 {
> > +			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> > +			reg = <0 0x01dc4000 0 0x24000>;
> > +			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
> > +			#dma-cells = <1>;
> > +			qcom,ee = <0>;
> > +			qcom,controlled-remotely;
> > +			num-channels = <16>;
> > +			qcom,num-ees = <4>;
> > +			iommus = <&apps_smmu 0x432 0x0000>,
> > +				 <&apps_smmu 0x438 0x0001>,
> > +				 <&apps_smmu 0x43f 0x0000>,
> > +				 <&apps_smmu 0x426 0x0011>,
> > +				 <&apps_smmu 0x436 0x0011>;
>
> The last two lines look equivalent to me: 0x436 & ~0x0011 = 0x426.

I don't understand the IOMMU SID + mask really, but I think I've seen
somewhere before like here that TZ can be a bit picky with the SIDs?

https://lore.kernel.org/linux-arm-msm/opqdrmyj3y64nqqqmakjydn5rkspizufyeavm7ec7c7ufqz4wk@ey2a7bq3shfj/
https://lore.kernel.org/linux-arm-msm/11b5db69-49f5-4d7b-81c9-687d66a5cb0d@linaro.org/

I don't quite want to risk having some obscure use case breaking because
we cleaned up the dts ;)

But if you're more sure than me that it won't break, let me know!

>
> It's also a bit weird that the mask has one more digit than the stream
> ID. And ordered numerically (by stream ID, first number) it would be a
> bit easier to read. :-)

Sorting them is no problem, can do that for v2.

>
> Thanks,
> Stephan
Stephan Gerhold Feb. 16, 2024, 12:27 p.m. UTC | #3
On Fri, Feb 16, 2024 at 11:46:49AM +0100, Luca Weiss wrote:
> On Fri Jan 5, 2024 at 5:30 PM CET, Stephan Gerhold wrote:
> > On Fri, Jan 05, 2024 at 05:15:44PM +0100, Luca Weiss wrote:
> > > Add crypto engine (CE) and CE BAM related nodes and definitions for this
> > > SoC.
> > > 
> > > For reference:
> > > 
> > >   [    2.297419] qcrypto 1dfa000.crypto: Crypto device found, version 5.5.1
> > > 
> > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> > > ---
> > >  arch/arm64/boot/dts/qcom/sm6350.dtsi | 31 +++++++++++++++++++++++++++++++
> > >  1 file changed, 31 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > > index 8fd6f4d03490..516aadbb16bb 100644
> > > --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > > @@ -1212,6 +1212,37 @@ ufs_mem_phy_lanes: phy@1d87400 {
> > >  			};
> > >  		};
> > >  
> > > +		cryptobam: dma-controller@1dc4000 {
> > > +			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> > > +			reg = <0 0x01dc4000 0 0x24000>;
> > > +			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
> > > +			#dma-cells = <1>;
> > > +			qcom,ee = <0>;
> > > +			qcom,controlled-remotely;
> > > +			num-channels = <16>;
> > > +			qcom,num-ees = <4>;
> > > +			iommus = <&apps_smmu 0x432 0x0000>,
> > > +				 <&apps_smmu 0x438 0x0001>,
> > > +				 <&apps_smmu 0x43f 0x0000>,
> > > +				 <&apps_smmu 0x426 0x0011>,
> > > +				 <&apps_smmu 0x436 0x0011>;
> >
> > The last two lines look equivalent to me: 0x436 & ~0x0011 = 0x426.
> 
> I don't understand the IOMMU SID + mask really, but I think I've seen
> somewhere before like here that TZ can be a bit picky with the SIDs?
> 
> https://lore.kernel.org/linux-arm-msm/opqdrmyj3y64nqqqmakjydn5rkspizufyeavm7ec7c7ufqz4wk@ey2a7bq3shfj/
> https://lore.kernel.org/linux-arm-msm/11b5db69-49f5-4d7b-81c9-687d66a5cb0d@linaro.org/
> 
> I don't quite want to risk having some obscure use case breaking because
> we cleaned up the dts ;)
> 
> But if you're more sure than me that it won't break, let me know!
> 

I'm afraid I can't really help with this kind of certainty. My knowledge
about proprietary Qualcomm firmware is probably even more limited than
yours. However, my personal feeling is that the "TZ wants X" arguments
are most often just as badly based on superficial knowledge.

In simplified terms, the SMMU has a number of components connected to it
(the crypto BAM, USB controller, UFS, ...). When the components make
memory requests they are identified by a number of Stream IDs (SIDs).
The purpose of "iommus" in the device tree is to describe all SIDs that
belong to a particular device. These SIDs are then all assigned to a
context bank that allows the device to access selected regions in RAM.

It shouldn't matter *how* the SIDs are matched inside the SMMU, as long
as they end up at the correct context bank. The SMMU will look through
the configured Stream Match Registers (SMRs = SID + Mask) to find the
context bank that is assigned to the SID. The docs say "If MASK[i]==1,
ID[i] is ignored.". This means a SMR with ID=0x426 MASK=0x0011 is
definitely identical to ID=0x436 MASK=0x0011. Having the extra entry
will make absolutely no difference to the SMMU aside from wasting a
pointless SMR.

The links you posted suggest "TZ" looks at the SMRs allocated by Linux.
If that is really the case then I would expect that to be fundamentally
broken. In my opinion there is absolutely no guarantee how or in which
order Linux allocates the SMRs. Such functionality would either be
extremely complex or broken in tons of edge cases.

TL;DR: I cannot provide proof that removing this entry makes a
difference. I can just say that I doubt it does, and if it does, then we
have far more serious problems. The device tree is supposed to describe
the hardware ("This device makes memory requests with the following
SIDs") and not fundamentally broken peculiarities of the proprietary TZ
firmware ("registers must be programmed exactly with these values").

Thanks,
Stephan
Bjorn Andersson Feb. 16, 2024, 6:09 p.m. UTC | #4
On Fri, Feb 16, 2024 at 11:46:49AM +0100, Luca Weiss wrote:
> On Fri Jan 5, 2024 at 5:30 PM CET, Stephan Gerhold wrote:
> > On Fri, Jan 05, 2024 at 05:15:44PM +0100, Luca Weiss wrote:
> > > Add crypto engine (CE) and CE BAM related nodes and definitions for this
> > > SoC.
> > > 
> > > For reference:
> > > 
> > >   [    2.297419] qcrypto 1dfa000.crypto: Crypto device found, version 5.5.1
> > > 
> > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> > > ---
> > >  arch/arm64/boot/dts/qcom/sm6350.dtsi | 31 +++++++++++++++++++++++++++++++
> > >  1 file changed, 31 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > > index 8fd6f4d03490..516aadbb16bb 100644
> > > --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > > @@ -1212,6 +1212,37 @@ ufs_mem_phy_lanes: phy@1d87400 {
> > >  			};
> > >  		};
> > >  
> > > +		cryptobam: dma-controller@1dc4000 {
> > > +			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> > > +			reg = <0 0x01dc4000 0 0x24000>;
> > > +			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
> > > +			#dma-cells = <1>;
> > > +			qcom,ee = <0>;
> > > +			qcom,controlled-remotely;
> > > +			num-channels = <16>;
> > > +			qcom,num-ees = <4>;
> > > +			iommus = <&apps_smmu 0x432 0x0000>,
> > > +				 <&apps_smmu 0x438 0x0001>,
> > > +				 <&apps_smmu 0x43f 0x0000>,
> > > +				 <&apps_smmu 0x426 0x0011>,
> > > +				 <&apps_smmu 0x436 0x0011>;
> >
> > The last two lines look equivalent to me: 0x436 & ~0x0011 = 0x426.
> 
> I don't understand the IOMMU SID + mask really, but I think I've seen
> somewhere before like here that TZ can be a bit picky with the SIDs?
> 
> https://lore.kernel.org/linux-arm-msm/opqdrmyj3y64nqqqmakjydn5rkspizufyeavm7ec7c7ufqz4wk@ey2a7bq3shfj/
> https://lore.kernel.org/linux-arm-msm/11b5db69-49f5-4d7b-81c9-687d66a5cb0d@linaro.org/
> 
> I don't quite want to risk having some obscure use case breaking because
> we cleaned up the dts ;)
> 
> But if you're more sure than me that it won't break, let me know!
> 
> >
> > It's also a bit weird that the mask has one more digit than the stream
> > ID. And ordered numerically (by stream ID, first number) it would be a
> > bit easier to read. :-)
> 
> Sorting them is no problem, can do that for v2.
> 

Where you able to do this? I don't see a v2 in my inbox, am I just
searching poorly?

Regards,
Bjorn

> >
> > Thanks,
> > Stephan
>
Luca Weiss Feb. 19, 2024, 10:35 a.m. UTC | #5
On Fri Feb 16, 2024 at 7:09 PM CET, Bjorn Andersson wrote:
> On Fri, Feb 16, 2024 at 11:46:49AM +0100, Luca Weiss wrote:
> > On Fri Jan 5, 2024 at 5:30 PM CET, Stephan Gerhold wrote:
> > > On Fri, Jan 05, 2024 at 05:15:44PM +0100, Luca Weiss wrote:
> > > > Add crypto engine (CE) and CE BAM related nodes and definitions for this
> > > > SoC.
> > > > 
> > > > For reference:
> > > > 
> > > >   [    2.297419] qcrypto 1dfa000.crypto: Crypto device found, version 5.5.1
> > > > 
> > > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> > > > ---
> > > >  arch/arm64/boot/dts/qcom/sm6350.dtsi | 31 +++++++++++++++++++++++++++++++
> > > >  1 file changed, 31 insertions(+)
> > > > 
> > > > diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > > > index 8fd6f4d03490..516aadbb16bb 100644
> > > > --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > > > +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > > > @@ -1212,6 +1212,37 @@ ufs_mem_phy_lanes: phy@1d87400 {
> > > >  			};
> > > >  		};
> > > >  
> > > > +		cryptobam: dma-controller@1dc4000 {
> > > > +			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> > > > +			reg = <0 0x01dc4000 0 0x24000>;
> > > > +			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
> > > > +			#dma-cells = <1>;
> > > > +			qcom,ee = <0>;
> > > > +			qcom,controlled-remotely;
> > > > +			num-channels = <16>;
> > > > +			qcom,num-ees = <4>;
> > > > +			iommus = <&apps_smmu 0x432 0x0000>,
> > > > +				 <&apps_smmu 0x438 0x0001>,
> > > > +				 <&apps_smmu 0x43f 0x0000>,
> > > > +				 <&apps_smmu 0x426 0x0011>,
> > > > +				 <&apps_smmu 0x436 0x0011>;
> > >
> > > The last two lines look equivalent to me: 0x436 & ~0x0011 = 0x426.
> > 
> > I don't understand the IOMMU SID + mask really, but I think I've seen
> > somewhere before like here that TZ can be a bit picky with the SIDs?
> > 
> > https://lore.kernel.org/linux-arm-msm/opqdrmyj3y64nqqqmakjydn5rkspizufyeavm7ec7c7ufqz4wk@ey2a7bq3shfj/
> > https://lore.kernel.org/linux-arm-msm/11b5db69-49f5-4d7b-81c9-687d66a5cb0d@linaro.org/
> > 
> > I don't quite want to risk having some obscure use case breaking because
> > we cleaned up the dts ;)
> > 
> > But if you're more sure than me that it won't break, let me know!
> > 
> > >
> > > It's also a bit weird that the mask has one more digit than the stream
> > > ID. And ordered numerically (by stream ID, first number) it would be a
> > > bit easier to read. :-)
> > 
> > Sorting them is no problem, can do that for v2.
> > 
>
> Where you able to do this? I don't see a v2 in my inbox, am I just
> searching poorly?

Only sent v2 some minutes ago, didn't have any more time on Friday.

Regards
Luca

>
> Regards,
> Bjorn
>
> > >
> > > Thanks,
> > > Stephan
> >
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 8fd6f4d03490..516aadbb16bb 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1212,6 +1212,37 @@  ufs_mem_phy_lanes: phy@1d87400 {
 			};
 		};
 
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <16>;
+			qcom,num-ees = <4>;
+			iommus = <&apps_smmu 0x432 0x0000>,
+				 <&apps_smmu 0x438 0x0001>,
+				 <&apps_smmu 0x43f 0x0000>,
+				 <&apps_smmu 0x426 0x0011>,
+				 <&apps_smmu 0x436 0x0011>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm6350-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x432 0x0000>,
+				 <&apps_smmu 0x438 0x0001>,
+				 <&apps_smmu 0x43f 0x0000>,
+				 <&apps_smmu 0x426 0x0011>,
+				 <&apps_smmu 0x436 0x0011>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sm6350-ipa";