diff mbox series

[v2,2/6] crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply

Message ID 20241105160859.1459261-10-ardb+git@google.com (mailing list archive)
State Under Review
Delegated to: Herbert Xu
Headers show
Series Clean up and improve ARM/arm64 CRC-T10DIF code | expand

Commit Message

Ard Biesheuvel Nov. 5, 2024, 4:09 p.m. UTC
From: Ard Biesheuvel <ardb@kernel.org>

The CRC-T10DIF implementation for arm64 has a version that uses 8x8
polynomial multiplication, for cores that lack the crypto extensions,
which cover the 64x64 polynomial multiplication instruction that the
algorithm was built around.

This fallback version rather naively adopted the 64x64 polynomial
multiplication algorithm that I ported from ARM for the GHASH driver,
which needs 8 PMULL8 instructions to implement one PMULL64. This is
reasonable, given that each 8-bit vector element needs to be multiplied
with each element in the other vector, producing 8 vectors with partial
results that need to be combined to yield the correct result.

However, most PMULL64 invocations in the CRC-T10DIF code involve
multiplication by a pair of 16-bit folding coefficients, and so all the
partial results from higher order bytes will be zero, and there is no
need to calculate them to begin with.

Then, the CRC-T10DIF algorithm always XORs the output values of the
PMULL64 instructions being issued in pairs, and so there is no need to
faithfully implement each individual PMULL64 instruction, as long as
XORing the results pairwise produces the expected result.

Implementing these improvements results in a speedup of 3.3x on low-end
platforms such as Raspberry Pi 4 (Cortex-A72)

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 arch/arm64/crypto/crct10dif-ce-core.S | 121 +++++++++++++++++---
 1 file changed, 104 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/crypto/crct10dif-ce-core.S b/arch/arm64/crypto/crct10dif-ce-core.S
index 5604de61d06d..d2acaa2b5a01 100644
--- a/arch/arm64/crypto/crct10dif-ce-core.S
+++ b/arch/arm64/crypto/crct10dif-ce-core.S
@@ -1,8 +1,11 @@ 
 //
 // Accelerated CRC-T10DIF using arm64 NEON and Crypto Extensions instructions
 //
-// Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
-// Copyright (C) 2019 Google LLC <ebiggers@google.com>
+// Copyright (C) 2016 Linaro Ltd
+// Copyright (C) 2019-2024 Google LLC
+//
+// Authors: Ard Biesheuvel <ardb@google.com>
+//          Eric Biggers <ebiggers@google.com>
 //
 // This program is free software; you can redistribute it and/or modify
 // it under the terms of the GNU General Public License version 2 as
@@ -122,6 +125,13 @@ 
 	sli		perm2.2d, perm1.2d, #56
 	sli		perm3.2d, perm1.2d, #48
 	sli		perm4.2d, perm1.2d, #40
+
+	// Compose { 0,0,0,0, 8,8,8,8, 1,1,1,1, 9,9,9,9 }
+	movi		bd1.4h, #8, lsl #8
+	orr		bd1.2s, #1, lsl #16
+	orr		bd1.2s, #1, lsl #24
+	zip1		bd1.16b, bd1.16b, bd1.16b
+	zip1		bd1.16b, bd1.16b, bd1.16b
 	.endm
 
 	.macro		__pmull_pre_p8, bd
@@ -196,6 +206,92 @@  SYM_FUNC_START_LOCAL(__pmull_p8_core)
 	ret
 SYM_FUNC_END(__pmull_p8_core)
 
+	.macro		pmull16x64_p64, a16, b64, c64
+	pmull2		\c64\().1q, \a16\().2d, \b64\().2d
+	pmull		\b64\().1q, \a16\().1d, \b64\().1d
+	.endm
+
+	/*
+	 * Pairwise long polynomial multiplication of two 16-bit values
+	 *
+	 *   { w0, w1 }, { y0, y1 }
+	 *
+	 * by two 64-bit values
+	 *
+	 *   { x0, x1, x2, x3, x4, x5, x6, x7 }, { z0, z1, z2, z3, z4, z5, z6, z7 }
+	 *
+	 * where each vector element is a byte, ordered from least to most
+	 * significant.
+	 *
+	 * This can be implemented using 8x8 long polynomial multiplication, by
+	 * reorganizing the input so that each pairwise 8x8 multiplication
+	 * produces one of the terms from the decomposition below, and
+	 * combining the results of each rank and shifting them into place.
+	 *
+	 * Rank
+	 *  0            w0*x0 ^              |        y0*z0 ^
+	 *  1       (w0*x1 ^ w1*x0) <<  8 ^   |   (y0*z1 ^ y1*z0) <<  8 ^
+	 *  2       (w0*x2 ^ w1*x1) << 16 ^   |   (y0*z2 ^ y1*z1) << 16 ^
+	 *  3       (w0*x3 ^ w1*x2) << 24 ^   |   (y0*z3 ^ y1*z2) << 24 ^
+	 *  4       (w0*x4 ^ w1*x3) << 32 ^   |   (y0*z4 ^ y1*z3) << 32 ^
+	 *  5       (w0*x5 ^ w1*x4) << 40 ^   |   (y0*z5 ^ y1*z4) << 40 ^
+	 *  6       (w0*x6 ^ w1*x5) << 48 ^   |   (y0*z6 ^ y1*z5) << 48 ^
+	 *  7       (w0*x7 ^ w1*x6) << 56 ^   |   (y0*z7 ^ y1*z6) << 56 ^
+	 *  8            w1*x7      << 64     |        y1*z7      << 64
+	 *
+	 * The inputs can be reorganized into
+	 *
+	 *   { w0, w0, w0, w0, y0, y0, y0, y0 }, { w1, w1, w1, w1, y1, y1, y1, y1 }
+	 *   { x0, x2, x4, x6, z0, z2, z4, z6 }, { x1, x3, x5, x7, z1, z3, z5, z7 }
+	 *
+	 * and after performing 8x8->16 bit long polynomial multiplication of
+	 * each of the halves of the first vector with those of the second one,
+	 * we obtain the following four vectors of 16-bit elements:
+	 *
+	 *   a := { w0*x0, w0*x2, w0*x4, w0*x6 }, { y0*z0, y0*z2, y0*z4, y0*z6 }
+	 *   b := { w0*x1, w0*x3, w0*x5, w0*x7 }, { y0*z1, y0*z3, y0*z5, y0*z7 }
+	 *   c := { w1*x0, w1*x2, w1*x4, w1*x6 }, { y1*z0, y1*z2, y1*z4, y1*z6 }
+	 *   d := { w1*x1, w1*x3, w1*x5, w1*x7 }, { y1*z1, y1*z3, y1*z5, y1*z7 }
+	 *
+	 * Results b and c can be XORed together, as the vector elements have
+	 * matching ranks. Then, the final XOR (*) can be pulled forward, and
+	 * applied between the halves of each of the remaining three vectors,
+	 * which are then shifted into place, and combined to produce two
+	 * 80-bit results.
+	 *
+	 * (*) NOTE: the 16x64 bit polynomial multiply below is not equivalent
+	 * to the 64x64 bit one above, but XOR'ing the outputs together will
+	 * produce the expected result, and this is sufficient in the context of
+	 * this algorithm.
+	 */
+	.macro		pmull16x64_p8, a16, b64, c64
+	ext		t7.16b, \b64\().16b, \b64\().16b, #1
+	tbl		t5.16b, {\a16\().16b}, bd1.16b
+	uzp1		t7.16b, \b64\().16b, t7.16b
+	bl		__pmull_p8_16x64
+	ext		\b64\().16b, t4.16b, t4.16b, #15
+	eor		\c64\().16b, t8.16b, t5.16b
+	.endm
+
+SYM_FUNC_START_LOCAL(__pmull_p8_16x64)
+	ext		t6.16b, t5.16b, t5.16b, #8
+
+	pmull		t3.8h, t7.8b, t5.8b
+	pmull		t4.8h, t7.8b, t6.8b
+	pmull2		t5.8h, t7.16b, t5.16b
+	pmull2		t6.8h, t7.16b, t6.16b
+
+	ext		t8.16b, t3.16b, t3.16b, #8
+	eor		t4.16b, t4.16b, t6.16b
+	ext		t7.16b, t5.16b, t5.16b, #8
+	ext		t6.16b, t4.16b, t4.16b, #8
+	eor		t8.8b, t8.8b, t3.8b
+	eor		t5.8b, t5.8b, t7.8b
+	eor		t4.8b, t4.8b, t6.8b
+	ext		t5.16b, t5.16b, t5.16b, #14
+	ret
+SYM_FUNC_END(__pmull_p8_16x64)
+
 	.macro		__pmull_p8, rq, ad, bd, i
 	.ifnc		\bd, fold_consts
 	.err
@@ -218,14 +314,12 @@  SYM_FUNC_END(__pmull_p8_core)
 	.macro		fold_32_bytes, p, reg1, reg2
 	ldp		q11, q12, [buf], #0x20
 
-	__pmull_\p	v8, \reg1, fold_consts, 2
-	__pmull_\p	\reg1, \reg1, fold_consts
+	pmull16x64_\p	fold_consts, \reg1, v8
 
 CPU_LE(	rev64		v11.16b, v11.16b		)
 CPU_LE(	rev64		v12.16b, v12.16b		)
 
-	__pmull_\p	v9, \reg2, fold_consts, 2
-	__pmull_\p	\reg2, \reg2, fold_consts
+	pmull16x64_\p	fold_consts, \reg2, v9
 
 CPU_LE(	ext		v11.16b, v11.16b, v11.16b, #8	)
 CPU_LE(	ext		v12.16b, v12.16b, v12.16b, #8	)
@@ -238,11 +332,9 @@  CPU_LE(	ext		v12.16b, v12.16b, v12.16b, #8	)
 
 	// Fold src_reg into dst_reg, optionally loading the next fold constants
 	.macro		fold_16_bytes, p, src_reg, dst_reg, load_next_consts
-	__pmull_\p	v8, \src_reg, fold_consts
-	__pmull_\p	\src_reg, \src_reg, fold_consts, 2
+	pmull16x64_\p	fold_consts, \src_reg, v8
 	.ifnb		\load_next_consts
 	ld1		{fold_consts.2d}, [fold_consts_ptr], #16
-	__pmull_pre_\p	fold_consts
 	.endif
 	eor		\dst_reg\().16b, \dst_reg\().16b, v8.16b
 	eor		\dst_reg\().16b, \dst_reg\().16b, \src_reg\().16b
@@ -296,7 +388,6 @@  CPU_LE(	ext		v7.16b, v7.16b, v7.16b, #8	)
 
 	// Load the constants for folding across 128 bytes.
 	ld1		{fold_consts.2d}, [fold_consts_ptr]
-	__pmull_pre_\p	fold_consts
 
 	// Subtract 128 for the 128 data bytes just consumed.  Subtract another
 	// 128 to simplify the termination condition of the following loop.
@@ -318,7 +409,6 @@  CPU_LE(	ext		v7.16b, v7.16b, v7.16b, #8	)
 	// Fold across 64 bytes.
 	add		fold_consts_ptr, fold_consts_ptr, #16
 	ld1		{fold_consts.2d}, [fold_consts_ptr], #16
-	__pmull_pre_\p	fold_consts
 	fold_16_bytes	\p, v0, v4
 	fold_16_bytes	\p, v1, v5
 	fold_16_bytes	\p, v2, v6
@@ -339,8 +429,7 @@  CPU_LE(	ext		v7.16b, v7.16b, v7.16b, #8	)
 	// into them, storing the result back into v7.
 	b.lt		.Lfold_16_bytes_loop_done_\@
 .Lfold_16_bytes_loop_\@:
-	__pmull_\p	v8, v7, fold_consts
-	__pmull_\p	v7, v7, fold_consts, 2
+	pmull16x64_\p	fold_consts, v7, v8
 	eor		v7.16b, v7.16b, v8.16b
 	ldr		q0, [buf], #16
 CPU_LE(	rev64		v0.16b, v0.16b			)
@@ -387,9 +476,8 @@  CPU_LE(	ext		v0.16b, v0.16b, v0.16b, #8	)
 	bsl		v2.16b, v1.16b, v0.16b
 
 	// Fold the first chunk into the second chunk, storing the result in v7.
-	__pmull_\p	v0, v3, fold_consts
-	__pmull_\p	v7, v3, fold_consts, 2
-	eor		v7.16b, v7.16b, v0.16b
+	pmull16x64_\p	fold_consts, v3, v0
+	eor		v7.16b, v3.16b, v0.16b
 	eor		v7.16b, v7.16b, v2.16b
 
 .Lreduce_final_16_bytes_\@:
@@ -450,7 +538,6 @@  CPU_LE(	ext		v7.16b, v7.16b, v7.16b, #8	)
 
 	// Load the fold-across-16-bytes constants.
 	ld1		{fold_consts.2d}, [fold_consts_ptr], #16
-	__pmull_pre_\p	fold_consts
 
 	cmp		len, #16
 	b.eq		.Lreduce_final_16_bytes_\@	// len == 16