diff mbox series

[v12,05/19] x86: Add early SHA-1 support for Secure Launch early measurements

Message ID 20241219194216.152839-6-ross.philipson@oracle.com (mailing list archive)
State Not Applicable
Delegated to: Herbert Xu
Headers show
Series x86: Trenchboot secure dynamic launch Linux kernel support | expand

Commit Message

Ross Philipson Dec. 19, 2024, 7:42 p.m. UTC 
From: "Daniel P. Smith" <dpsmith@apertussolutions.com>

Secure Launch is written to be compliant with the Intel TXT Measured Launch
Developer's Guide. The MLE Guide dictates that the system can be configured to
use both the SHA-1 and SHA-2 hashing algorithms.

Regardless of the preference towards SHA-2, if the firmware elected to start
with the SHA-1 and SHA-2 banks active and the dynamic launch was configured to
include SHA-1, Secure Launch is obligated to record measurements for all
algorithms requested in the launch configuration.

The user environment or the integrity management does not desire to use SHA-1,
it is free to just ignore the SHA-1 bank in any integrity operation with the
TPM. If there is a larger concern about the SHA-1 bank being active, it is free
to deliberately cap the SHA-1 PCRs, recording the event in the D-RTM log.

The SHA-1 code here has its origins in the code from the main kernel:

commit c4d5b9f ("crypto: sha1 - implement base layer for SHA-1")

A modified version of this code was introduced to the lib/crypto/sha1.c to bring
it in line with the SHA-256 code and allow it to be pulled into the setup kernel
in the same manner as SHA-256 is.

Signed-off-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Signed-off-by: Ross Philipson <ross.philipson@oracle.com>
---
 arch/x86/boot/compressed/Makefile |  2 +
 arch/x86/boot/compressed/sha1.c   |  6 +++
 include/crypto/sha1.h             |  1 +
 lib/crypto/sha1.c                 | 81 +++++++++++++++++++++++++++++++
 4 files changed, 90 insertions(+)
 create mode 100644 arch/x86/boot/compressed/sha1.c
diff mbox series

Patch

diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index f2051644de94..7eb03afb841b 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -107,6 +107,8 @@  vmlinux-objs-$(CONFIG_EFI) += $(obj)/efi.o
 vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_mixed.o
 vmlinux-libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
 
+vmlinux-objs-$(CONFIG_SECURE_LAUNCH) += $(obj)/sha1.o
+
 $(obj)/vmlinux: $(vmlinux-objs-y) $(vmlinux-libs-y) FORCE
 	$(call if_changed,ld)
 
diff --git a/arch/x86/boot/compressed/sha1.c b/arch/x86/boot/compressed/sha1.c
new file mode 100644
index 000000000000..d754489941ac
--- /dev/null
+++ b/arch/x86/boot/compressed/sha1.c
@@ -0,0 +1,6 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Apertus Solutions, LLC.
+ */
+
+#include "../../../../lib/crypto/sha1.c"
diff --git a/include/crypto/sha1.h b/include/crypto/sha1.h
index 044ecea60ac8..d715dd5332e1 100644
--- a/include/crypto/sha1.h
+++ b/include/crypto/sha1.h
@@ -42,5 +42,6 @@  extern int crypto_sha1_finup(struct shash_desc *desc, const u8 *data,
 #define SHA1_WORKSPACE_WORDS	16
 void sha1_init(__u32 *buf);
 void sha1_transform(__u32 *digest, const char *data, __u32 *W);
+void sha1(const u8 *data, unsigned int len, u8 *out);
 
 #endif /* _CRYPTO_SHA1_H */
diff --git a/lib/crypto/sha1.c b/lib/crypto/sha1.c
index ebb60519ae93..0bd32df31743 100644
--- a/lib/crypto/sha1.c
+++ b/lib/crypto/sha1.c
@@ -137,5 +137,86 @@  void sha1_init(__u32 *buf)
 }
 EXPORT_SYMBOL(sha1_init);
 
+static void __sha1_transform(u32 *digest, const char *data)
+{
+	u32 ws[SHA1_WORKSPACE_WORDS];
+
+	sha1_transform(digest, data, ws);
+
+	/* Ensure local data for generating digest is cleared in all cases */
+	memzero_explicit(ws, sizeof(ws));
+}
+
+static void sha1_update(struct sha1_state *sctx, const u8 *data, unsigned int len)
+{
+	unsigned int partial = sctx->count % SHA1_BLOCK_SIZE;
+	int blocks;
+
+	sctx->count += len;
+
+	if (unlikely((partial + len) < SHA1_BLOCK_SIZE))
+		goto out;
+
+	if (partial) {
+		int p = SHA1_BLOCK_SIZE - partial;
+
+		memcpy(sctx->buffer + partial, data, p);
+		data += p;
+		len -= p;
+
+		__sha1_transform(sctx->state, sctx->buffer);
+	}
+
+	blocks = len / SHA1_BLOCK_SIZE;
+	len %= SHA1_BLOCK_SIZE;
+
+	if (blocks) {
+		while (blocks--) {
+			__sha1_transform(sctx->state, data);
+			data += SHA1_BLOCK_SIZE;
+		}
+	}
+	partial = 0;
+
+out:
+	memcpy(sctx->buffer + partial, data, len);
+}
+
+static void sha1_final(struct sha1_state *sctx, u8 *out)
+{
+	const int bit_offset = SHA1_BLOCK_SIZE - sizeof(__be64);
+	unsigned int partial = sctx->count % SHA1_BLOCK_SIZE;
+	__be64 *bits = (__be64 *)(sctx->buffer + bit_offset);
+	__be32 *digest = (__be32 *)out;
+	int i;
+
+	sctx->buffer[partial++] = 0x80;
+	if (partial > bit_offset) {
+		memset(sctx->buffer + partial, 0x0, SHA1_BLOCK_SIZE - partial);
+		partial = 0;
+
+		__sha1_transform(sctx->state, sctx->buffer);
+	}
+
+	memset(sctx->buffer + partial, 0x0, bit_offset - partial);
+	*bits = cpu_to_be64(sctx->count << 3);
+	__sha1_transform(sctx->state, sctx->buffer);
+
+	for (i = 0; i < SHA1_DIGEST_SIZE / sizeof(__be32); i++)
+		put_unaligned_be32(sctx->state[i], digest++);
+
+	*sctx = (struct sha1_state){};
+}
+
+void sha1(const u8 *data, unsigned int len, u8 *out)
+{
+	struct sha1_state sctx = {0};
+
+	sha1_init(sctx.state);
+	sha1_update(&sctx, data, len);
+	sha1_final(&sctx, out);
+}
+EXPORT_SYMBOL(sha1);
+
 MODULE_DESCRIPTION("SHA-1 Algorithm");
 MODULE_LICENSE("GPL");