Message ID | 3461827.FYLMCAIQyv@wuerfel (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Herbert Xu |
Headers | show |
On 10 April 2015 at 21:57, Arnd Bergmann <arnd@arndb.de> wrote: > Old versions of binutils (before 2.23) do not yet understand the > crypto-neon-fp-armv8 fpu instructions, and an attempt to build these > files results in a build failure: > > arch/arm/crypto/aes-ce-core.S:133: Error: selected processor does not support ARM mode `vld1.8 {q10-q11},[ip]!' > arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aese.8 q0,q8' > arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aesmc.8 q0,q0' > arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aese.8 q0,q9' > arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aesmc.8 q0,q0' > > Since the affected versions are still in widespread use, and this breaks > 'allmodconfig' builds, we should try to at least get a successful kernel > build. Unfortunately, I could not come up with a way to make the Kconfig > symbol depend on the binutils version, which would be the nicest solution. > > This patch uses the 'as-option' Kbuild macro to find out whether the > support is present in the assembler, and otherwise passes a macro > definition to each affected file, which in turn disables that code > entirely and results in empty modules. > > In order to help users figure out what to do, we also add a #warning > state in place of the removed to that tells users which version to use. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > Link: http://storage.kernelci.org/next/next-20150410/arm-allmodconfig/build.log > Fixes: 864cbeed4ab22d ("crypto: arm - add support for SHA1 using ARMv8 Crypto Instructions") > > diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile > index ef46e898f98b..60f2101e0586 100644 > --- a/arch/arm/crypto/Makefile > +++ b/arch/arm/crypto/Makefile > @@ -25,6 +25,10 @@ sha2-arm-ce-y := sha2-ce-core.o sha2-ce-glue.o > aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o > ghash-arm-ce-y := ghash-ce-core.o ghash-ce-glue.o > > +armv8-ce-flags := $(call as-option,-Wa$(comma)-mfpu=crypto-neon-fp-armv8,-DARMV8_CE_DISABLED) > +asflags-y := $(armv8-ce-flags) > +ccflags-y := $(armv8-ce-flags) > + Could you perhaps put the rules that build these modules inside a ifneq ($(armv8-ce-flags),-DARMV8_CE_DISABLED) ... endif block? > quiet_cmd_perl = PERL $@ > cmd_perl = $(PERL) $(<) > $(@) > > diff --git a/arch/arm/crypto/aes-ce-core.S b/arch/arm/crypto/aes-ce-core.S > index 8cfa468ee570..f2132ba91353 100644 > --- a/arch/arm/crypto/aes-ce-core.S > +++ b/arch/arm/crypto/aes-ce-core.S > @@ -8,11 +8,14 @@ > * published by the Free Software Foundation. > */ > > +#ifdef ARMV8_CE_DISABLED > +#warning ARMv8 Crypto Extensions need binutils 2.23 or higher > +#else > + > #include <linux/linkage.h> > #include <asm/assembler.h> > > .text > - .fpu crypto-neon-fp-armv8 > .align 3 > > .macro enc_round, state, key > @@ -516,3 +519,5 @@ ENTRY(ce_aes_invert) > vst1.8 {q0}, [r0] > bx lr > ENDPROC(ce_aes_invert) > + > +#endif > diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c > index b445a5d56f43..4cba201a64a9 100644 > --- a/arch/arm/crypto/aes-ce-glue.c > +++ b/arch/arm/crypto/aes-ce-glue.c > @@ -510,13 +510,16 @@ static struct crypto_alg aes_algs[] = { { > > static int __init aes_init(void) > { > - if (!(elf_hwcap2 & HWCAP2_AES)) > + if (IS_ENABLED(ARMV8_CE_DISABLED) || !(elf_hwcap2 & HWCAP2_AES)) > return -ENODEV; > return crypto_register_algs(aes_algs, ARRAY_SIZE(aes_algs)); > } > > static void __exit aes_exit(void) > { > + if (IS_ENABLED(ARMV8_CE_DISABLED)) > + return; > + > crypto_unregister_algs(aes_algs, ARRAY_SIZE(aes_algs)); > } > > diff --git a/arch/arm/crypto/ghash-ce-core.S b/arch/arm/crypto/ghash-ce-core.S > index f6ab8bcc9efe..4fe75df41162 100644 > --- a/arch/arm/crypto/ghash-ce-core.S > +++ b/arch/arm/crypto/ghash-ce-core.S > @@ -8,6 +8,10 @@ > * by the Free Software Foundation. > */ > > +#ifdef ARMV8_CE_DISABLED > +#warning ARMv8 Crypto Extensions need binutils 2.23 or higher > +#else > + > #include <linux/linkage.h> > #include <asm/assembler.h> > > @@ -33,8 +37,6 @@ > XH_L .req d14 > > .text > - .fpu crypto-neon-fp-armv8 > - > /* > * void pmull_ghash_update(int blocks, u64 dg[], const char *src, > * struct ghash_key const *k, const char *head) > @@ -92,3 +94,5 @@ ENTRY(pmull_ghash_update) > vst1.64 {XL}, [r1] > bx lr > ENDPROC(pmull_ghash_update) > + > +#endif > diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c > index 03a39fe29246..880afe904e5d 100644 > --- a/arch/arm/crypto/ghash-ce-glue.c > +++ b/arch/arm/crypto/ghash-ce-glue.c > @@ -293,7 +293,7 @@ static int __init ghash_ce_mod_init(void) > { > int err; > > - if (!(elf_hwcap2 & HWCAP2_PMULL)) > + if (IS_ENABLED(ARMV8_CE_DISABLED) || !(elf_hwcap2 & HWCAP2_AES)) > return -ENODEV; > > err = crypto_register_shash(&ghash_alg); > @@ -312,6 +312,9 @@ err_shash: > > static void __exit ghash_ce_mod_exit(void) > { > + if (IS_ENABLED(ARMV8_CE_DISABLED)) > + return; > + > crypto_unregister_ahash(&ghash_async_alg); > crypto_unregister_shash(&ghash_alg); > } > diff --git a/arch/arm/crypto/sha1-ce-core.S b/arch/arm/crypto/sha1-ce-core.S > index 4aad520935d8..ab0fe554a6cf 100644 > --- a/arch/arm/crypto/sha1-ce-core.S > +++ b/arch/arm/crypto/sha1-ce-core.S > @@ -9,11 +9,14 @@ > * published by the Free Software Foundation. > */ > > +#ifdef ARMV8_CE_DISABLED > +#warning ARMv8 Crypto Extensions need binutils 2.23 or higher > +#else > + > #include <linux/linkage.h> > #include <asm/assembler.h> > > .text > - .fpu crypto-neon-fp-armv8 > > k0 .req q0 > k1 .req q1 > @@ -132,3 +135,5 @@ ENTRY(sha1_ce_transform) > vstr dgbs, [r2, #16] > bx lr > ENDPROC(sha1_ce_transform) > + > +#endif > diff --git a/arch/arm/crypto/sha1-ce-glue.c b/arch/arm/crypto/sha1-ce-glue.c > index a9dd90df9fd7..045cabad9296 100644 > --- a/arch/arm/crypto/sha1-ce-glue.c > +++ b/arch/arm/crypto/sha1-ce-glue.c > @@ -136,13 +136,16 @@ static struct shash_alg alg = { > > static int __init sha1_ce_mod_init(void) > { > - if (!(elf_hwcap2 & HWCAP2_SHA1)) > + if (IS_ENABLED(ARMV8_CE_DISABLED) || !(elf_hwcap2 & HWCAP2_AES)) > return -ENODEV; > return crypto_register_shash(&alg); > } > > static void __exit sha1_ce_mod_fini(void) > { > + if (IS_ENABLED(ARMV8_CE_DISABLED)) > + return; > + > crypto_unregister_shash(&alg); > } > > diff --git a/arch/arm/crypto/sha2-ce-core.S b/arch/arm/crypto/sha2-ce-core.S > index 96af09fe957b..3db821c5f4cd 100644 > --- a/arch/arm/crypto/sha2-ce-core.S > +++ b/arch/arm/crypto/sha2-ce-core.S > @@ -9,11 +9,14 @@ > * published by the Free Software Foundation. > */ > > +#ifdef ARMV8_CE_DISABLED > +#warning ARMv8 Crypto Extensions need binutils 2.23 or higher > +#else > + > #include <linux/linkage.h> > #include <asm/assembler.h> > > .text > - .fpu crypto-neon-fp-armv8 > > k0 .req q7 > k1 .req q8 > @@ -132,3 +135,5 @@ ENTRY(sha2_ce_transform) > vst1.32 {dga-dgb}, [r2] > bx lr > ENDPROC(sha2_ce_transform) > + > +#endif > diff --git a/arch/arm/crypto/sha2-ce-glue.c b/arch/arm/crypto/sha2-ce-glue.c > index 0449eca3aab3..3f8010837310 100644 > --- a/arch/arm/crypto/sha2-ce-glue.c > +++ b/arch/arm/crypto/sha2-ce-glue.c > @@ -189,13 +189,16 @@ static struct shash_alg algs[] = { { > > static int __init sha2_ce_mod_init(void) > { > - if (!(elf_hwcap2 & HWCAP2_SHA2)) > + if (IS_ENABLED(ARMV8_CE_DISABLED) || !(elf_hwcap2 & HWCAP2_AES)) > return -ENODEV; > return crypto_register_shashes(algs, ARRAY_SIZE(algs)); > } > > static void __exit sha2_ce_mod_fini(void) > { > + if (IS_ENABLED(ARMV8_CE_DISABLED)) > + return; > + > crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); > } > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-crypto" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Saturday 11 April 2015 09:41:08 Ard Biesheuvel wrote: > Could you perhaps put the rules that build these modules inside a > > ifneq ($(armv8-ce-flags),-DARMV8_CE_DISABLED) > ... > endif > How about something like this: ifeq ($(call as-option,-Wa$(comma)-mfpu=crypto-neon-fp-armv8),) $(warning ARMv8 Crypto Extensions need binutils 2.23 or higher) else ... endif That would basically be a reimplementation of the missing "as-option-yn" macro though, so we could also add that instead and do ifeq ($(call as-option-yn,-Wa$(comma)-mfpu=crypto-neon-fp-armv8),y) $(warning ARMv8 Crypto Extensions need binutils 2.23 or higher) else ... endif Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-crypto" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> On 11 apr. 2015, at 10:55, Arnd Bergmann <arnd@arndb.de> wrote: > >> On Saturday 11 April 2015 09:41:08 Ard Biesheuvel wrote: >> Could you perhaps put the rules that build these modules inside a >> >> ifneq ($(armv8-ce-flags),-DARMV8_CE_DISABLED) >> ... >> endif > > How about something like this: > > ifeq ($(call as-option,-Wa$(comma)-mfpu=crypto-neon-fp-armv8),) > $(warning ARMv8 Crypto Extensions need binutils 2.23 or higher) > else > ... > endif > > That would basically be a reimplementation of the missing "as-option-yn" > macro though, so we could also add that instead and do > > ifeq ($(call as-option-yn,-Wa$(comma)-mfpu=crypto-neon-fp-armv8),y) > $(warning ARMv8 Crypto Extensions need binutils 2.23 or higher) > else > ... > endif > Yes, that should work. Could we also move the CE objs to ce-obj-$() and put ifneq ($(ce-obj-y)$(ce-obj-m),) if <as check> obj-y += $(ce-obj-y) obj-m += $(ce-obj-m) else $(warning ...) endif endif around it so you only get the warning if you have selected any of these modules? In any case, I strongly prefer to leave the .S files themselves alone if at all possible Ard. -- To unsubscribe from this list: send the line "unsubscribe linux-crypto" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Saturday 11 April 2015 12:35:19 Ard Biesheuvel wrote: > > Yes, that should work. Could we also move the CE objs to ce-obj-$() and put > > ifneq ($(ce-obj-y)$(ce-obj-m),) > if <as check> > obj-y += $(ce-obj-y) > obj-m += $(ce-obj-m) > else > $(warning ...) > endif > endif > > around it so you only get the warning if you have selected any of these modules? Sounds good, I had not thought of that. > In any case, I strongly prefer to leave the .S files themselves alone if at all possible Yes, makes sense. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-crypto" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index ef46e898f98b..60f2101e0586 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -25,6 +25,10 @@ sha2-arm-ce-y := sha2-ce-core.o sha2-ce-glue.o aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o ghash-arm-ce-y := ghash-ce-core.o ghash-ce-glue.o +armv8-ce-flags := $(call as-option,-Wa$(comma)-mfpu=crypto-neon-fp-armv8,-DARMV8_CE_DISABLED) +asflags-y := $(armv8-ce-flags) +ccflags-y := $(armv8-ce-flags) + quiet_cmd_perl = PERL $@ cmd_perl = $(PERL) $(<) > $(@) diff --git a/arch/arm/crypto/aes-ce-core.S b/arch/arm/crypto/aes-ce-core.S index 8cfa468ee570..f2132ba91353 100644 --- a/arch/arm/crypto/aes-ce-core.S +++ b/arch/arm/crypto/aes-ce-core.S @@ -8,11 +8,14 @@ * published by the Free Software Foundation. */ +#ifdef ARMV8_CE_DISABLED +#warning ARMv8 Crypto Extensions need binutils 2.23 or higher +#else + #include <linux/linkage.h> #include <asm/assembler.h> .text - .fpu crypto-neon-fp-armv8 .align 3 .macro enc_round, state, key @@ -516,3 +519,5 @@ ENTRY(ce_aes_invert) vst1.8 {q0}, [r0] bx lr ENDPROC(ce_aes_invert) + +#endif diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index b445a5d56f43..4cba201a64a9 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -510,13 +510,16 @@ static struct crypto_alg aes_algs[] = { { static int __init aes_init(void) { - if (!(elf_hwcap2 & HWCAP2_AES)) + if (IS_ENABLED(ARMV8_CE_DISABLED) || !(elf_hwcap2 & HWCAP2_AES)) return -ENODEV; return crypto_register_algs(aes_algs, ARRAY_SIZE(aes_algs)); } static void __exit aes_exit(void) { + if (IS_ENABLED(ARMV8_CE_DISABLED)) + return; + crypto_unregister_algs(aes_algs, ARRAY_SIZE(aes_algs)); } diff --git a/arch/arm/crypto/ghash-ce-core.S b/arch/arm/crypto/ghash-ce-core.S index f6ab8bcc9efe..4fe75df41162 100644 --- a/arch/arm/crypto/ghash-ce-core.S +++ b/arch/arm/crypto/ghash-ce-core.S @@ -8,6 +8,10 @@ * by the Free Software Foundation. */ +#ifdef ARMV8_CE_DISABLED +#warning ARMv8 Crypto Extensions need binutils 2.23 or higher +#else + #include <linux/linkage.h> #include <asm/assembler.h> @@ -33,8 +37,6 @@ XH_L .req d14 .text - .fpu crypto-neon-fp-armv8 - /* * void pmull_ghash_update(int blocks, u64 dg[], const char *src, * struct ghash_key const *k, const char *head) @@ -92,3 +94,5 @@ ENTRY(pmull_ghash_update) vst1.64 {XL}, [r1] bx lr ENDPROC(pmull_ghash_update) + +#endif diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c index 03a39fe29246..880afe904e5d 100644 --- a/arch/arm/crypto/ghash-ce-glue.c +++ b/arch/arm/crypto/ghash-ce-glue.c @@ -293,7 +293,7 @@ static int __init ghash_ce_mod_init(void) { int err; - if (!(elf_hwcap2 & HWCAP2_PMULL)) + if (IS_ENABLED(ARMV8_CE_DISABLED) || !(elf_hwcap2 & HWCAP2_AES)) return -ENODEV; err = crypto_register_shash(&ghash_alg); @@ -312,6 +312,9 @@ err_shash: static void __exit ghash_ce_mod_exit(void) { + if (IS_ENABLED(ARMV8_CE_DISABLED)) + return; + crypto_unregister_ahash(&ghash_async_alg); crypto_unregister_shash(&ghash_alg); } diff --git a/arch/arm/crypto/sha1-ce-core.S b/arch/arm/crypto/sha1-ce-core.S index 4aad520935d8..ab0fe554a6cf 100644 --- a/arch/arm/crypto/sha1-ce-core.S +++ b/arch/arm/crypto/sha1-ce-core.S @@ -9,11 +9,14 @@ * published by the Free Software Foundation. */ +#ifdef ARMV8_CE_DISABLED +#warning ARMv8 Crypto Extensions need binutils 2.23 or higher +#else + #include <linux/linkage.h> #include <asm/assembler.h> .text - .fpu crypto-neon-fp-armv8 k0 .req q0 k1 .req q1 @@ -132,3 +135,5 @@ ENTRY(sha1_ce_transform) vstr dgbs, [r2, #16] bx lr ENDPROC(sha1_ce_transform) + +#endif diff --git a/arch/arm/crypto/sha1-ce-glue.c b/arch/arm/crypto/sha1-ce-glue.c index a9dd90df9fd7..045cabad9296 100644 --- a/arch/arm/crypto/sha1-ce-glue.c +++ b/arch/arm/crypto/sha1-ce-glue.c @@ -136,13 +136,16 @@ static struct shash_alg alg = { static int __init sha1_ce_mod_init(void) { - if (!(elf_hwcap2 & HWCAP2_SHA1)) + if (IS_ENABLED(ARMV8_CE_DISABLED) || !(elf_hwcap2 & HWCAP2_AES)) return -ENODEV; return crypto_register_shash(&alg); } static void __exit sha1_ce_mod_fini(void) { + if (IS_ENABLED(ARMV8_CE_DISABLED)) + return; + crypto_unregister_shash(&alg); } diff --git a/arch/arm/crypto/sha2-ce-core.S b/arch/arm/crypto/sha2-ce-core.S index 96af09fe957b..3db821c5f4cd 100644 --- a/arch/arm/crypto/sha2-ce-core.S +++ b/arch/arm/crypto/sha2-ce-core.S @@ -9,11 +9,14 @@ * published by the Free Software Foundation. */ +#ifdef ARMV8_CE_DISABLED +#warning ARMv8 Crypto Extensions need binutils 2.23 or higher +#else + #include <linux/linkage.h> #include <asm/assembler.h> .text - .fpu crypto-neon-fp-armv8 k0 .req q7 k1 .req q8 @@ -132,3 +135,5 @@ ENTRY(sha2_ce_transform) vst1.32 {dga-dgb}, [r2] bx lr ENDPROC(sha2_ce_transform) + +#endif diff --git a/arch/arm/crypto/sha2-ce-glue.c b/arch/arm/crypto/sha2-ce-glue.c index 0449eca3aab3..3f8010837310 100644 --- a/arch/arm/crypto/sha2-ce-glue.c +++ b/arch/arm/crypto/sha2-ce-glue.c @@ -189,13 +189,16 @@ static struct shash_alg algs[] = { { static int __init sha2_ce_mod_init(void) { - if (!(elf_hwcap2 & HWCAP2_SHA2)) + if (IS_ENABLED(ARMV8_CE_DISABLED) || !(elf_hwcap2 & HWCAP2_AES)) return -ENODEV; return crypto_register_shashes(algs, ARRAY_SIZE(algs)); } static void __exit sha2_ce_mod_fini(void) { + if (IS_ENABLED(ARMV8_CE_DISABLED)) + return; + crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); }
Old versions of binutils (before 2.23) do not yet understand the crypto-neon-fp-armv8 fpu instructions, and an attempt to build these files results in a build failure: arch/arm/crypto/aes-ce-core.S:133: Error: selected processor does not support ARM mode `vld1.8 {q10-q11},[ip]!' arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aese.8 q0,q8' arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aesmc.8 q0,q0' arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aese.8 q0,q9' arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aesmc.8 q0,q0' Since the affected versions are still in widespread use, and this breaks 'allmodconfig' builds, we should try to at least get a successful kernel build. Unfortunately, I could not come up with a way to make the Kconfig symbol depend on the binutils version, which would be the nicest solution. This patch uses the 'as-option' Kbuild macro to find out whether the support is present in the assembler, and otherwise passes a macro definition to each affected file, which in turn disables that code entirely and results in empty modules. In order to help users figure out what to do, we also add a #warning state in place of the removed to that tells users which version to use. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: http://storage.kernelci.org/next/next-20150410/arm-allmodconfig/build.log Fixes: 864cbeed4ab22d ("crypto: arm - add support for SHA1 using ARMv8 Crypto Instructions") -- To unsubscribe from this list: send the line "unsubscribe linux-crypto" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html