diff mbox

[08/26] davinci: Fix watchdog reset code

Message ID 1246914900-9034-9-git-send-email-khilman@deeprootsystems.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Kevin Hilman July 6, 2009, 9:14 p.m. UTC 
From: David Griego <dgriego@mvista.com>

The davinci reset routine, davinci_watchdog_reset(), sets the
TCR register instead of the TGCR register as it should to put
the WDT into its "Initial State".

It also writes the WDTCR register without the proper WDKEY
which is pointless since the register will be write-protected.

Signed-off-by: David Griego <dgriego@mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/time.c |   10 +++-------
 1 files changed, 3 insertions(+), 7 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 0884ca5..ca85d18 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -420,11 +420,11 @@  void davinci_watchdog_reset(void)
 
 	/* reset timer, set mode to 64-bit watchdog, and unreset */
 	tgcr = 0;
-	__raw_writel(tgcr, base + TCR);
+	__raw_writel(tgcr, base + TGCR);
 	tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
 	tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
 		(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-	__raw_writel(tgcr, base + TCR);
+	__raw_writel(tgcr, base + TGCR);
 
 	/* clear counter and period regs */
 	__raw_writel(0, base + TIM12);
@@ -432,12 +432,8 @@  void davinci_watchdog_reset(void)
 	__raw_writel(0, base + PRD12);
 	__raw_writel(0, base + PRD34);
 
-	/* enable */
-	wdtcr = __raw_readl(base + WDTCR);
-	wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
-	__raw_writel(wdtcr, base + WDTCR);
-
 	/* put watchdog in pre-active state */
+	wdtcr = __raw_readl(base + WDTCR);
 	wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
 		(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
 	__raw_writel(wdtcr, base + WDTCR);