diff mbox

[Ver,1.0,2/7] Subscribes for USB resources for TI DM644x EVM platform.

Message ID 1255621580-24379-3-git-send-email-swami.iyer@ti.com (mailing list archive)
State Changes Requested
Headers show

Commit Message

Subbrathnam, Swaminathan Oct. 15, 2009, 3:46 p.m. UTC
None
diff mbox

Patch

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 1213a00..bafae44 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -29,6 +29,7 @@ 
 #include <linux/phy.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
+#include <linux/usb/musb.h>
 
 #include <media/tvp514x.h>
 
@@ -63,6 +64,8 @@ 
 #define LXT971_PHY_ID	(0x001378e2)
 #define LXT971_PHY_MASK	(0xfffffff0)
 
+static int dm644x_evm_set_vbus(struct device *dev, int is_on);
+
 static struct mtd_partition davinci_evm_norflash_partitions[] = {
 	/* bootloader (UBL, U-Boot, etc) in first 5 sectors */
 	{
@@ -477,7 +480,6 @@  evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
 	/* irlml6401 switches over 1A, in under 8 msec;
 	 * now it can be managed by nDRV_VBUS ...
 	 */
-	setup_usb(500, 8);
 
 	return 0;
 }
@@ -699,6 +701,21 @@  static int davinci_phy_fixup(struct phy_device *phydev)
 #define HAS_NAND 0
 #endif
 
+static struct musb_hdrc_platform_data usb_evm_data[] = {
+	{
+#if defined(CONFIG_USB_MUSB_OTG)
+		.mode = MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
+		.mode =  MUSB_PERIPHERAL,
+#elif defined(CONFIG_USB_MUSB_HOST)
+		.mode = MUSB_HOST,
+#endif
+		.power = 255,
+		.potpgt = 8,
+		.set_vbus = dm644x_evm_set_vbus,
+	}
+};
+
 static __init void davinci_evm_init(void)
 {
 	struct clk *aemif_clk;
@@ -747,6 +764,7 @@  static __init void davinci_evm_init(void)
 	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
 					davinci_phy_fixup);
 
+	dm644x_usb_configure(usb_evm_data, ARRAY_SIZE(usb_evm_data));
 }
 
 static __init void davinci_evm_irq_init(void)
@@ -754,6 +772,32 @@  static __init void davinci_evm_irq_init(void)
 	davinci_irq_init();
 }
 
+#define GPIO_nVBUS_DRV (DAVINCI_N_GPIO + 16) /* USB VBUS line */
+static int vbus_state = -1;
+static void evm_deferred_drvvbus(struct work_struct *ignored)
+{
+	gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state);
+	vbus_state = !vbus_state;
+}
+
+/*
+ * DM644x EVM USB VBUS handler.  On TI DM644x EVM USB VBUS is controller
+ * through I2C expander (0x3A) lines.  Tthis function schedules a
+ * work thread to handle the actual VBUS on/off operations.
+ */
+static int dm644x_evm_set_vbus(struct device *dev, int is_on)
+{
+	static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
+
+	is_on = is_on ? 1 : 0;
+	if (vbus_state == is_on)
+		return 0;
+
+	vbus_state = !is_on;
+	schedule_work(&evm_vbus_work);
+	return 0;
+}
+
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	/* Maintainer: MontaVista Software <source@mvista.com> */
 	.phys_io      = IO_PHYS,
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d6e0fa5..08feb99 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -28,6 +28,8 @@ 
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
+#include <mach/usb_musb.h>
+#include <mach/usb.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -761,6 +763,74 @@  void __init dm644x_init(void)
 	davinci_common_init(&davinci_soc_info_dm644x);
 }
 
+/*
+ * Configure the USB PHY for DM644x platforms.
+ */
+static int dm644x_usb_phy_config(struct device *dev, u8 mode, int is_on)
+{
+	u32     phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+	if (is_on) {
+		/* power everything up; start the on-chip PHY and its PLL */
+		phy_ctrl &= ~(USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN);
+		phy_ctrl |= USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON;
+	} else {
+		/* powerdown the on-chip PHY, its PLL, and the OTG block */
+		phy_ctrl &= ~(USBPHY_SESNDEN | USBPHY_VBDTCTEN |
+				USBPHY_PHYPLLON);
+		phy_ctrl |= USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN;
+	}
+
+	__raw_writel(phy_ctrl, USB_PHY_CTRL);
+
+	if (is_on) {
+		/* wait for PLL to lock before proceeding */
+		while ((__raw_readl(USB_PHY_CTRL) & USBPHY_PHYCLKGD) == 0)
+			cpu_relax();
+	}
+
+	return 0;
+}
+
+static struct resource usb_resources[] = {
+	{
+		.start	= DAVINCI_USB_OTG_BASE,
+		.end	= DAVINCI_USB_OTG_BASE + 0x5ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_USBINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct plat_res_data dm644x_usb_res;
+static struct usb_plat_data dm644x_usb_plat_data;
+
+/*
+ * Initialize DM644x related USB information such as Memory maps, IRQ etc.
+ * Since DM644x supprot a single MUSB controller initialize the instance
+ * value to 1.
+ */
+void dm644x_usb_configure(struct musb_hdrc_platform_data *pdata, u8 num_inst)
+{
+	pdata->phy_config = dm644x_usb_phy_config;
+
+	dm644x_usb_res.plat_data = pdata;
+	dm644x_usb_res.res_data = usb_resources;
+	dm644x_usb_res.num_res = ARRAY_SIZE(usb_resources);
+
+	dm644x_usb_plat_data.prdata = &dm644x_usb_res;
+	dm644x_usb_plat_data.num_inst = num_inst;
+
+	/* Call the generic platform register function.  The USB
+	 * configuration w.r.t no. of ep's, capabalities etc. are common
+	 * across DaVinci platforms and hence allow the generic handler
+	 * to populate the information.
+	*/
+	setup_usb(&dm644x_usb_plat_data);
+}
+
 static int __init dm644x_init_devices(void)
 {
 	if (!cpu_is_davinci_dm644x())
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 0efb738..1f6f3fa 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -27,6 +27,7 @@ 
 #include <mach/emac.h>
 #include <mach/asp.h>
 #include <media/davinci/vpfe_capture.h>
+#include <linux/usb/musb.h>
 
 #define DM644X_EMAC_BASE		(0x01C80000)
 #define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -38,5 +39,7 @@ 
 void __init dm644x_init(void);
 void __init dm644x_init_asp(struct snd_platform_data *pdata);
 void dm644x_set_vpfe_config(struct vpfe_config *cfg);
+extern void dm644x_usb_configure(struct musb_hdrc_platform_data *pdata,
+					u8 num_inst);
 
 #endif /* __ASM_ARCH_DM644X_H */
diff --git a/arch/arm/mach-davinci/include/mach/usb.h b/arch/arm/mach-davinci/include/mach/usb.h
index 435f228..96a60b1 100644
--- a/arch/arm/mach-davinci/include/mach/usb.h
+++ b/arch/arm/mach-davinci/include/mach/usb.h
@@ -10,6 +10,8 @@ 
 
 #ifndef __ASM_ARCH_USB_H
 #define __ASM_ARCH_USB_H
+#include <mach/hardware.h>
+#include <linux/io.h>
 
 /* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
 #define CFGCHIP2_PHYCLKGD	(1 << 17)
@@ -34,6 +36,20 @@ 
 #define CFGCHIP2_REFFREQ_24MHZ	(2 << 0)
 #define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
 
+/* DMxxxx USB PHY definitions */
+#define USBPHY_CTL_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define USB_PHY_CTRL		IO_ADDRESS(USBPHY_CTL_PADDR)
+
+#define USBPHY_PHYCLKGD		BIT(8)
+#define USBPHY_SESNDEN		BIT(7)  /* v(sess_end) comparator */
+#define USBPHY_VBDTCTEN		BIT(6)  /* v(bus) comparator */
+#define USBPHY_VBUSSENS		BIT(5)  /* (dm355,ro) is vbus > 0.5V */
+#define USBPHY_PHYPLLON		BIT(4)  /* override pll suspend */
+#define USBPHY_CLKO1SEL		BIT(3)
+#define USBPHY_OSCPDWN		BIT(2)
+#define USBPHY_OTGPDWN		BIT(1)
+#define USBPHY_PHYPDWN		BIT(0)
+
 struct	da8xx_ohci_root_hub;
 
 typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,