@@ -69,9 +69,9 @@ struct clk {
const char *name;
unsigned long rate;
u8 usecount;
- u8 flags;
u8 lpsc;
u8 psc_ctlr;
+ u32 flags;
struct clk *parent;
struct list_head children; /* list of children */
struct list_head childnode; /* parent's child list node */
@@ -82,7 +82,7 @@ struct clk {
int (*round_rate) (struct clk *clk, unsigned long rate);
};
-/* Clock flags */
+/* Clock flags: SoC-specific flags start at BIT(16) */
#define ALWAYS_ENABLED BIT(1)
#define CLK_PSC BIT(2)
#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */
@@ -30,12 +30,17 @@
#include "clock.h"
#include "mux.h"
+/* SoC specific clock flags */
+#define DA850_CLK_ASYNC3 BIT(16)
+
#define DA850_PLL1_BASE 0x01e1a000
#define DA850_TIMER64P2_BASE 0x01f0c000
#define DA850_TIMER64P3_BASE 0x01f0d000
#define DA850_REF_FREQ 24000000
+#define CFGCHIP3_ASYNC3_CLKSRC BIT(4)
+
static struct pll_data pll0_data = {
.num = 1,
.phys_base = DA8XX_PLL0_BASE,
@@ -232,6 +237,7 @@ static struct clk uart1_clk = {
.name = "uart1",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_UART1,
+ .flags = DA850_CLK_ASYNC3,
.psc_ctlr = 1,
};
@@ -239,6 +245,7 @@ static struct clk uart2_clk = {
.name = "uart2",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_UART2,
+ .flags = DA850_CLK_ASYNC3,
.psc_ctlr = 1,
};
@@ -790,6 +797,30 @@ static struct davinci_timer_info da850_timer_info = {
.clocksource_id = T0_TOP,
};
+static void da850_set_async3_src(int pllnum)
+{
+ struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2;
+ struct davinci_clk *c;
+ unsigned int v;
+ int ret;
+
+ for (c = da850_clks; c->lk.clk; c++) {
+ clk = c->lk.clk;
+ if (clk->flags & DA850_CLK_ASYNC3) {
+ ret = clk_set_parent(clk, newparent);
+ WARN(ret, "DA850: unable to re-parent clock %s",
+ clk->name);
+ }
+ }
+
+ v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+ if (pllnum)
+ v |= CFGCHIP3_ASYNC3_CLKSRC;
+ else
+ v &= ~CFGCHIP3_ASYNC3_CLKSRC;
+ __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+}
+
static struct davinci_soc_info davinci_soc_info_da850 = {
.io_desc = da850_io_desc,
.io_desc_num = ARRAY_SIZE(da850_io_desc),
@@ -823,4 +854,13 @@ void __init da850_init(void)
davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
davinci_common_init(&davinci_soc_info_da850);
+
+ /*
+ * Move the clock source of Async3 domain to PLL1 SYSCLK2.
+ * This helps keeping the peripherals on this domain insulated
+ * from CPU frequency changes caused by DVFS. The firmware sets
+ * both PLL0 and PLL1 to the same frequency so, there should not
+ * be any noticible change even in non-DVFS use cases.
+ */
+ da850_set_async3_src(1);
}
@@ -34,6 +34,7 @@ extern void __iomem *da8xx_syscfg_base;
#define DA8XX_SYSCFG_BASE (IO_PHYS + 0x14000)
#define DA8XX_SYSCFG_VIRT(x) (da8xx_syscfg_base + (x))
#define DA8XX_JTAG_ID_REG 0x18
+#define DA8XX_CFGCHIP3_REG 0x188
#define DA8XX_PSC0_BASE 0x01c10000
#define DA8XX_PLL0_BASE 0x01c11000