[3/7] musb: Update musb_init() call for all OMAP3 boards

Message ID	1258275578-1773-4-git-send-email-ajay.gupta@ti.com (mailing list archive)
State	Superseded
Headers	show Received: from comal.ext.ti.com (comal.ext.ti.com [198.47.26.152]) by demeter.kernel.org (8.14.2/8.14.2) with ESMTP id nAF92Wnk003732 for <patchwork-davinci@patchwork.kernel.org>; Sun, 15 Nov 2009 09:02:33 GMT From: Ajay Kumar Gupta <ajay.gupta@ti.com> To: linux-omap@vger.kernel.org, davinci-linux-open-source@linux.davincidsp.com Subject: [PATCH 3/7] musb: Update musb_init() call for all OMAP3 boards Date: Sun, 15 Nov 2009 14:29:34 +0530 Message-Id: <1258275578-1773-4-git-send-email-ajay.gupta@ti.com> In-Reply-To: <1258275578-1773-3-git-send-email-ajay.gupta@ti.com> References: <1258275578-1773-1-git-send-email-ajay.gupta@ti.com> <1258275578-1773-2-git-send-email-ajay.gupta@ti.com> <1258275578-1773-3-git-send-email-ajay.gupta@ti.com> Cc: felipe.balbi@nokia.com Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: davinci-linux-open-source-bounces@linux.davincidsp.com Errors-To: davinci-linux-open-source-bounces@linux.davincidsp.com

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index db9374b..03d3634 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -23,6 +23,7 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/usb/musb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -194,6 +195,10 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; +static struct musb_hdrc_board_data musb_bdata __initdata = { + .power = 50 +}; + static void __init omap_2430sdp_init(void) { int ret; @@ -203,7 +208,7 @@ static void __init omap_2430sdp_init(void) platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); omap_serial_init(); twl4030_mmc_init(mmc); - usb_musb_init(); + usb_musb_init(&musb_bdata); board_smc91x_init(); /* Turn off secondary LCD backlight */ diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index a3c1271..dde1a96 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -24,6 +24,7 @@ #include <linux/regulator/machine.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/usb/musb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -484,6 +485,10 @@ static void enable_board_wakeup_source(void) omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ } +static struct musb_hdrc_board_data musb_bdata __initdata = { + .power = 50 +}; + static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, @@ -509,7 +514,7 @@ static void __init omap_3430sdp_init(void) ARRAY_SIZE(sdp3430_spi_board_info)); ads7846_dev_init(); omap_serial_init(); - usb_musb_init(); + usb_musb_init(&musb_bdata); board_smc91x_init(); enable_board_wakeup_source(); usb_ehci_init(&ehci_pdata); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 22c4529..5d7656c 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -31,6 +31,7 @@ #include <linux/i2c/at24.h> #include <linux/i2c/twl4030.h> #include <linux/regulator/machine.h> +#include <linux/usb/musb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -383,6 +384,10 @@ static struct twl4030_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct musb_hdrc_board_data musb_bdata __initdata = { + .power = 50 +}; + static struct ehci_hcd_omap_platform_data ehci_pdata = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, @@ -491,7 +496,7 @@ static void __init cm_t35_init(void) cm_t35_init_ethernet(); cm_t35_init_led(); - usb_musb_init(); + usb_musb_init(&musb_bdata); omap_cfg_reg(AF26_34XX_SYS_NIRQ); } diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index c062238..0546c78 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -27,6 +27,7 @@ #include <linux/i2c/twl4030.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/usb/musb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -374,6 +375,10 @@ static struct platform_device *ldp_devices[] __initdata = { &ldp_gpio_keys_device, }; +static struct musb_hdrc_board_data musb_bdata __initdata = { + .power = 50 +}; + static void __init omap_ldp_init(void) { omap_i2c_init(); @@ -384,7 +389,7 @@ static void __init omap_ldp_init(void) ARRAY_SIZE(ldp_spi_board_info)); ads7846_dev_init(); omap_serial_init(); - usb_musb_init(); + usb_musb_init(&musb_bdata); twl4030_mmc_init(mmc); /* link regulators to MMC adapters */ diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7ad9846..683b468 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -30,6 +30,7 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl4030.h> +#include <linux/usb/musb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -400,6 +401,10 @@ static void __init omap3beagle_flash_init(void) } } +static struct musb_hdrc_board_data musb_bdata __initdata = { + .power = 50 +}; + static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, @@ -424,7 +429,7 @@ static void __init omap3_beagle_init(void) /* REVISIT leave DVI powered down until it's needed ... */ gpio_direction_output(170, true); - usb_musb_init(); + usb_musb_init(&musb_bdata); usb_ehci_init(&ehci_pdata); omap3beagle_flash_init(); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index be93142..dad690f 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -27,6 +27,7 @@ #include <linux/spi/ads7846.h> #include <linux/i2c/twl4030.h> #include <linux/usb/otg.h> +#include <linux/usb/musb.h> #include <linux/regulator/machine.h> @@ -376,6 +377,10 @@ static struct platform_device *omap3_evm_devices[] __initdata = { &omap3evm_smc911x_device, }; +static struct musb_hdrc_board_data musb_bdata __initdata = { + .power = 50 +}; + static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, @@ -427,7 +432,7 @@ static void __init omap3_evm_init(void) omap_cfg_reg(AF4_34XX_GPIO135_OUT); ehci_pdata.reset_gpio_port[1] = 135; } - usb_musb_init(); + usb_musb_init(&musb_bdata); usb_ehci_init(&ehci_pdata); ads7846_dev_init(); } diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index d81d1a0..da97a0d 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -29,6 +29,7 @@ #include <linux/input.h> #include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> +#include <linux/usb/musb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -387,6 +388,10 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_keys_gpio, }; +static struct musb_hdrc_board_data musb_bdata __initdata = { + .power = 50 +}; + static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, @@ -410,7 +415,7 @@ static void __init omap3pandora_init(void) omap3pandora_ads7846_init(); usb_ehci_init(&ehci_pdata); pandora_keys_gpio_init(); - usb_musb_init(); + usb_musb_init(&musb_bdata); /* Ensure SDRC pins are mux'd for self-refresh */ omap_cfg_reg(H16_34XX_SDRC_CKE0); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 92f3f3a..d16c714 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -32,6 +32,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/usb/musb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -384,6 +385,10 @@ static struct platform_device *overo_devices[] __initdata = { &overo_lcd_device, }; +static struct musb_hdrc_board_data musb_bdata __initdata = { + .power = 50 +}; + static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, @@ -402,7 +407,7 @@ static void __init overo_init(void) platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); omap_serial_init(); overo_flash_init(); - usb_musb_init(); + usb_musb_init(&musb_bdata); usb_ehci_init(&ehci_pdata); overo_ads7846_init(); overo_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 1bb1de2..60c8f9f 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -16,6 +16,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/usb/musb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -55,6 +56,10 @@ static struct omap_board_config_kernel rx51_config[] = { { OMAP_TAG_LCD, &rx51_lcd_config }, }; +static struct musb_hdrc_board_data musb_bdata __initdata = { + .power = 50 +}; + static void __init rx51_init_irq(void) { struct omap_sdrc_params *sdrc_params; @@ -72,7 +77,7 @@ extern void __init rx51_peripherals_init(void); static void __init rx51_init(void) { omap_serial_init(); - usb_musb_init(); + usb_musb_init(&musb_bdata); rx51_peripherals_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index e89c6b1..29a59c9 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -140,8 +140,11 @@ static struct platform_device musb_device = { .resource = musb_resources, }; -void __init usb_musb_init(void) +void __init usb_musb_init(struct musb_hdrc_board_data *board_data) { + /* get board-specific data */ + musb_plat.board_data = board_data; + if (cpu_is_omap243x()) musb_resources[0].start = OMAP243X_HS_BASE; else @@ -161,7 +164,7 @@ void __init usb_musb_init(void) } #else -void __init usb_musb_init(void) +void __init usb_musb_init(struct musb_hdrc_board_data *board_data) { } #endif /* CONFIG_USB_MUSB_SOC */ diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 33a500e..ec6bfe0 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -3,6 +3,7 @@ #ifndef __ASM_ARCH_OMAP_USB_H #define __ASM_ARCH_OMAP_USB_H +#include <linux/usb/musb.h> #include <plat/board.h> #define OMAP3_HS_USB_PORTS 3 @@ -42,7 +43,7 @@ struct ehci_hcd_omap_platform_data { #define UDC_BASE OMAP2_UDC_BASE #define OMAP_OHCI_BASE OMAP2_OHCI_BASE -extern void usb_musb_init(void); +extern void usb_musb_init(struct musb_hdrc_board_data *board_data); extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);

[3/7] musb: Update musb_init() call for all OMAP3 boards

Commit Message

Patch