diff mbox

[8/8] musb: set 'extvbus = 0' for Blackfin boards

Message ID 1258470596-24321-9-git-send-email-ajay.gupta@ti.com (mailing list archive)
State Changes Requested
Headers show

Commit Message

Ajay Kumar Gupta Nov. 17, 2009, 3:09 p.m. UTC 
None
diff mbox

Patch

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index f1996b1..48e1591 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -104,6 +104,11 @@  static struct musb_hdrc_config musb_config = {
 	.gpio_vrsel	= GPIO_PF11,
 };
 
+/* musb board specific details */
+static struct musb_hdrc_board_data musb_bdata = {
+	.extvbus = 0,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -113,6 +118,7 @@  static struct musb_hdrc_platform_data musb_plat = {
 	.mode		= MUSB_PERIPHERAL,
 #endif
 	.config		= &musb_config,
+	.board_data	= &musb_bdata,
 };
 
 static u64 musb_dmamask = ~(u32)0;
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index cad23b1..bc56ea9 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -64,6 +64,11 @@  static struct musb_hdrc_config musb_config = {
 	.gpio_vrsel	= GPIO_PG13,
 };
 
+/* musb board specific details */
+static struct musb_hdrc_board_data musb_bdata = {
+	.extvbus = 0,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -73,6 +78,7 @@  static struct musb_hdrc_platform_data musb_plat = {
 	.mode		= MUSB_PERIPHERAL,
 #endif
 	.config		= &musb_config,
+	.board_data	= &musb_bdata,
 };
 
 static u64 musb_dmamask = ~(u32)0;
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index f09665f..c99e8f2 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -102,6 +102,11 @@  static struct musb_hdrc_config musb_config = {
 	.gpio_vrsel	= GPIO_PG13,
 };
 
+/* musb board specific details */
+static struct musb_hdrc_board_data musb_bdata = {
+	.extvbus = 0,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -111,6 +116,7 @@  static struct musb_hdrc_platform_data musb_plat = {
 	.mode		= MUSB_PERIPHERAL,
 #endif
 	.config		= &musb_config,
+	.board_data	= &musb_bdata,
 };
 
 static u64 musb_dmamask = ~(u32)0;
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index ccdcd6d..f745ab3 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -333,6 +333,11 @@  static struct musb_hdrc_config musb_config = {
 	.gpio_vrsel	= GPIO_PH6,
 };
 
+/* musb board specific details */
+static struct musb_hdrc_board_data musb_bdata = {
+	.extvbus = 0,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -342,6 +347,7 @@  static struct musb_hdrc_platform_data musb_plat = {
 	.mode		= MUSB_PERIPHERAL,
 #endif
 	.config		= &musb_config,
+	.board_data	= &musb_bdata,
 };
 
 static u64 musb_dmamask = ~(u32)0;
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 1a5286b..00995e8 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -435,6 +435,11 @@  static struct musb_hdrc_config musb_config = {
 	.gpio_vrsel	= GPIO_PE7,
 };
 
+/* musb board specific details */
+static struct musb_hdrc_board_data musb_bdata = {
+	.extvbus = 0,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -444,6 +449,7 @@  static struct musb_hdrc_platform_data musb_plat = {
 	.mode		= MUSB_PERIPHERAL,
 #endif
 	.config		= &musb_config,
+	.board_data	= &musb_bdata,
 };
 
 static u64 musb_dmamask = ~(u32)0;