@@ -113,7 +113,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
#define EMAC_DEF_MAX_FRAME_SIZE (1500 + 14 + 4 + 4)
#define EMAC_DEF_TX_CH (0) /* Default 0th channel */
#define EMAC_DEF_RX_CH (0) /* Default 0th channel */
-#define EMAC_DEF_MDIO_TICK_MS (10) /* typically 1 tick=1 ms) */
#define EMAC_DEF_MAX_TX_CH (1) /* Max TX channels configured */
#define EMAC_DEF_MAX_RX_CH (1) /* Max RX channels configured */
#define EMAC_POLL_WEIGHT (64) /* Default NAPI poll weight */
@@ -303,25 +302,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
#define EMAC_DM644X_INTMIN_INTVL 0x1
#define EMAC_DM644X_INTMAX_INTVL (EMAC_DM644X_EWINTCNT_MASK)
-/* EMAC MDIO related */
-/* Mask & Control defines */
-#define MDIO_CONTROL_CLKDIV (0xFF)
-#define MDIO_CONTROL_ENABLE BIT(30)
-#define MDIO_USERACCESS_GO BIT(31)
-#define MDIO_USERACCESS_WRITE BIT(30)
-#define MDIO_USERACCESS_READ (0)
-#define MDIO_USERACCESS_REGADR (0x1F << 21)
-#define MDIO_USERACCESS_PHYADR (0x1F << 16)
-#define MDIO_USERACCESS_DATA (0xFFFF)
-#define MDIO_USERPHYSEL_LINKSEL BIT(7)
-#define MDIO_VER_MODID (0xFFFF << 16)
-#define MDIO_VER_REVMAJ (0xFF << 8)
-#define MDIO_VER_REVMIN (0xFF)
-
-#define MDIO_USERACCESS(inst) (0x80 + (inst * 8))
-#define MDIO_USERPHYSEL(inst) (0x84 + (inst * 8))
-#define MDIO_CONTROL (0x04)
-
/* EMAC DM646X control module registers */
#define EMAC_DM646X_CMINTCTRL 0x0C
#define EMAC_DM646X_CMRXINTEN 0x14
@@ -493,13 +473,6 @@ struct emac_priv {
u32 mac_hash2;
u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS];
u32 rx_addr_type;
- /* periodic timer required for MDIO polling */
- struct timer_list periodic_timer;
- u32 periodic_ticks;
- u32 timer_active;
- u32 phy_mask;
- /* mii_bus,phy members */
- struct mii_bus *mii_bus;
const char *phy_id;
struct phy_device *phydev;
spinlock_t lock;
@@ -511,7 +484,6 @@ struct emac_priv {
/* clock frequency for EMAC */
static struct clk *emac_clk;
static unsigned long emac_bus_frequency;
-static unsigned long mdio_max_freq;
#define emac_virt_to_phys(addr, priv) \
(((u32 __force)(addr) - (u32 __force)(priv->emac_ctrl_ram)) \
@@ -549,9 +521,6 @@ static char *emac_rxhost_errcodes[16] = {
#define emac_ctrl_read(reg) ioread32((priv->ctrl_base + (reg)))
#define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg)))
-#define emac_mdio_read(reg) ioread32(bus->priv + (reg))
-#define emac_mdio_write(reg, val) iowrite32(val, (bus->priv + (reg)))
-
/**
* emac_dump_regs: Dump important EMAC registers to debug terminal
* @priv: The DaVinci EMAC private adapter structure
@@ -657,9 +626,6 @@ static void emac_dump_regs(struct emac_priv *priv)
emac_read(EMAC_RXDMAOVERRUNS));
}
-/*************************************************************************
- * EMAC MDIO/Phy Functionality
- *************************************************************************/
/**
* emac_get_drvinfo: Get EMAC driver information
* @ndev: The DaVinci EMAC network adapter
@@ -2349,79 +2315,6 @@ void emac_poll_controller(struct net_device *ndev)
}
#endif
-/* PHY/MII bus related */
-
-/* Wait until mdio is ready for next command */
-#define MDIO_WAIT_FOR_USER_ACCESS\
- while ((emac_mdio_read((MDIO_USERACCESS(0))) &\
- MDIO_USERACCESS_GO) != 0)
-
-static int emac_mii_read(struct mii_bus *bus, int phy_id, int phy_reg)
-{
- unsigned int phy_data = 0;
- unsigned int phy_control;
-
- /* Wait until mdio is ready for next command */
- MDIO_WAIT_FOR_USER_ACCESS;
-
- phy_control = (MDIO_USERACCESS_GO |
- MDIO_USERACCESS_READ |
- ((phy_reg << 21) & MDIO_USERACCESS_REGADR) |
- ((phy_id << 16) & MDIO_USERACCESS_PHYADR) |
- (phy_data & MDIO_USERACCESS_DATA));
- emac_mdio_write(MDIO_USERACCESS(0), phy_control);
-
- /* Wait until mdio is ready for next command */
- MDIO_WAIT_FOR_USER_ACCESS;
-
- return emac_mdio_read(MDIO_USERACCESS(0)) & MDIO_USERACCESS_DATA;
-
-}
-
-static int emac_mii_write(struct mii_bus *bus, int phy_id,
- int phy_reg, u16 phy_data)
-{
-
- unsigned int control;
-
- /* until mdio is ready for next command */
- MDIO_WAIT_FOR_USER_ACCESS;
-
- control = (MDIO_USERACCESS_GO |
- MDIO_USERACCESS_WRITE |
- ((phy_reg << 21) & MDIO_USERACCESS_REGADR) |
- ((phy_id << 16) & MDIO_USERACCESS_PHYADR) |
- (phy_data & MDIO_USERACCESS_DATA));
- emac_mdio_write(MDIO_USERACCESS(0), control);
-
- return 0;
-}
-
-static int emac_mii_reset(struct mii_bus *bus)
-{
- unsigned int clk_div;
- int mdio_bus_freq = emac_bus_frequency;
-
- if (mdio_max_freq && mdio_bus_freq)
- clk_div = ((mdio_bus_freq / mdio_max_freq) - 1);
- else
- clk_div = 0xFF;
-
- clk_div &= MDIO_CONTROL_CLKDIV;
-
- /* Set enable and clock divider in MDIOControl */
- emac_mdio_write(MDIO_CONTROL, (clk_div | MDIO_CONTROL_ENABLE));
-
- return 0;
-
-}
-
-static int mii_irqs[PHY_MAX_ADDR] = { PHY_POLL, PHY_POLL };
-
-/* emac_driver: EMAC MII bus structure */
-
-static struct mii_bus *emac_mii;
-
static void emac_adjust_link(struct net_device *ndev)
{
struct emac_priv *priv = netdev_priv(ndev);
@@ -24,10 +24,7 @@ struct emac_platform_data {
u32 ctrl_mod_reg_offset;
u32 ctrl_ram_offset;
u32 hw_ram_addr;
- u32 mdio_reg_offset;
u32 ctrl_ram_size;
- u32 phy_mask;
- u32 mdio_max_freq;
/*
* phy_id can be one of the following: