From patchwork Thu Oct 14 17:23:38 2010 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Victor Rodriguez X-Patchwork-Id: 253661 Received: from devils.ext.ti.com (devils.ext.ti.com [198.47.26.153]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id o9EHPEuc031675 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK) for ; Thu, 14 Oct 2010 17:25:35 GMT Received: from dlep36.itg.ti.com ([157.170.170.91]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id o9EHNVtl017651 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 14 Oct 2010 12:23:31 -0500 Received: from linux.omap.com (localhost [127.0.0.1]) by dlep36.itg.ti.com (8.13.8/8.13.8) with ESMTP id o9EHNUvl027558; Thu, 14 Oct 2010 12:23:30 -0500 (CDT) Received: from linux.omap.com (localhost [127.0.0.1]) by linux.omap.com (Postfix) with ESMTP id 92F4080632; Thu, 14 Oct 2010 12:23:29 -0500 (CDT) X-Original-To: davinci-linux-open-source@linux.davincidsp.com Delivered-To: davinci-linux-open-source@linux.davincidsp.com Received: from dlep34.itg.ti.com (dlep34.itg.ti.com [157.170.170.115]) by linux.omap.com (Postfix) with ESMTP id 2C0B680635 for ; Thu, 14 Oct 2010 12:22:45 -0500 (CDT) Received: from emcc1.sasken-mty.naucm.ext.ti.com (localhost [127.0.0.1]) by dlep34.itg.ti.com (8.13.7/8.13.7) with ESMTP id o9EHMgQi000576; Thu, 14 Oct 2010 12:22:42 -0500 (CDT) Received: from localhost.localdomain (victor-desktop.sasken-mty.naucm.ext.ti.com [10.87.230.94]) by emcc1.sasken-mty.naucm.ext.ti.com (8.13.8+Sun/8.13.8) with ESMTP id o9EHMgDl009628; Thu, 14 Oct 2010 12:22:42 -0500 (CDT) From: To: Subject: [PATCH v3 9/9] davinci: USB-OHCI support for Omapl138-Hawkboard Date: Thu, 14 Oct 2010 12:23:38 -0500 Message-Id: <1287077018-4550-1-git-send-email-vm.rod25@gmail.com> X-Mailer: git-send-email 1.6.0.5 Cc: alsa-devel@alsa-project.org, sshtylyov@mvista.com X-BeenThere: davinci-linux-open-source@linux.davincidsp.com X-Mailman-Version: 2.1.12 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: davinci-linux-open-source-bounces@linux.davincidsp.com Errors-To: davinci-linux-open-source-bounces@linux.davincidsp.com X-Greylist: Sender succeeded STARTTLS authentication, not delayed by milter-greylist-4.2.3 (demeter1.kernel.org [140.211.167.41]); Thu, 14 Oct 2010 17:25:35 +0000 (UTC) diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 723ac03..bac29fc 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -26,6 +26,9 @@ #define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) #define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) +#define DA850_USB1_VBUS_PIN GPIO_TO_PIN(2, 4) +#define DA850_USB1_OC_PIN GPIO_TO_PIN(6, 13) + static short omapl138_hawk_mii_pins[] __initdata = { DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, @@ -177,6 +180,94 @@ static struct davinci_mmc_config da850_mmc_config = { .version = MMC_CTLR_VERSION_2, }; +static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id); +static da8xx_ocic_handler_t hawk_usb_ocic_handler; + +static const short da850_hawk_usb11_pins[] = { + DA850_GPIO2_4, DA850_GPIO6_13, + -1 +}; +static int hawk_usb_set_power(unsigned port, int on) +{ + gpio_set_value(DA850_USB1_VBUS_PIN, on); + return 0; +} + +static int hawk_usb_get_power(unsigned port) +{ + return gpio_get_value(DA850_USB1_VBUS_PIN); +} + +static int hawk_usb_get_oci(unsigned port) +{ + return !gpio_get_value(DA850_USB1_OC_PIN); +} + +static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler) +{ + int irq = gpio_to_irq(DA850_USB1_OC_PIN); + int error = 0; + + if (handler != NULL) { + hawk_usb_ocic_handler = handler; + + error = request_irq(irq, omapl138_hawk_usb_ocic_irq, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + "OHCI over-current indicator", NULL); + if (error) + printk(KERN_ERR "%s: could not request IRQ to watch " + "over-current indicator changes\n", __func__); + } else + free_irq(irq, NULL); + + return error; +} + +static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = { + .set_power = hawk_usb_set_power, + .get_power = hawk_usb_get_power, + .get_oci = hawk_usb_get_oci, + .ocic_notify = hawk_usb_ocic_notify, + /* TPS2087 switch @ 5V */ + .potpgt = (3 + 1) / 2, /* 3 ms max */ +}; + +static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id) +{ + hawk_usb_ocic_handler(&omapl138_hawk_usb11_pdata, 1); + return IRQ_HANDLED; +} + +static __init void omapl138_hawk_usb_init(void) +{ + int ret; + u32 cfgchip2; + /* + * Setup the Ref. clock frequency for the HAWK at 24 MHz. + */ + cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + cfgchip2 &= ~CFGCHIP2_REFFREQ; + cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; + __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + + ret = gpio_request(DA850_USB1_VBUS_PIN, "USB1 VBUS\n"); + if (ret) { + printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " + "power control: %d\n", __func__, ret); + return; + } + gpio_direction_output(DA850_USB1_VBUS_PIN, 0); + + ret = gpio_request(DA850_USB1_OC_PIN, "USB1 OC"); + if (ret) { + printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " + "over-current indicator: %d\n", __func__, ret); + return; + } + gpio_direction_input(DA850_USB1_OC_PIN); +} + static struct davinci_uart_config omapl138_hawk_uart_config __initdata = { .enabled_uarts = 0x7, }; @@ -229,6 +320,16 @@ static __init void omapl138_hawk_init(void) pr_warning("%s: MMC/SD0 registration failed: %d\n", __func__, ret); + ret = davinci_cfg_reg_list(da850_hawk_usb11_pins); + if (ret) + pr_warning("%s: USB 1.1 PinMux setup failed: %d\n", + __func__, ret); + omapl138_hawk_usb_init(); + ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata); + if (ret) + pr_warning("%s: USB 1.1 registration failed: %d\n", + __func__, ret); + ret = da8xx_register_watchdog(); if (ret) pr_warning("omapl138_hawk_init: "