From patchwork Fri Oct 29 15:10:45 2010 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Victor Rodriguez X-Patchwork-Id: 290392 Received: from comal.ext.ti.com (comal.ext.ti.com [198.47.26.152]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id o9TFBB46009515 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK) for ; Fri, 29 Oct 2010 15:11:33 GMT Received: from dlep34.itg.ti.com ([157.170.170.115]) by comal.ext.ti.com (8.13.7/8.13.7) with ESMTP id o9TFBA8I008208 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Fri, 29 Oct 2010 10:11:10 -0500 Received: from linux.omap.com (localhost [127.0.0.1]) by dlep34.itg.ti.com (8.13.7/8.13.7) with ESMTP id o9TFB9pn019711 for ; Fri, 29 Oct 2010 10:11:09 -0500 (CDT) Received: from linux.omap.com (localhost [127.0.0.1]) by linux.omap.com (Postfix) with ESMTP id 7C7C28062A for ; Fri, 29 Oct 2010 10:11:08 -0500 (CDT) X-Original-To: davinci-linux-open-source@linux.davincidsp.com Delivered-To: davinci-linux-open-source@linux.davincidsp.com Received: from dflp52.itg.ti.com (dflp52.itg.ti.com [128.247.22.96]) by linux.omap.com (Postfix) with ESMTP id 6D7FB80626 for ; Fri, 29 Oct 2010 10:10:50 -0500 (CDT) Received: from red.ext.ti.com (localhost [127.0.0.1]) by dflp52.itg.ti.com (8.13.7/8.13.7) with ESMTP id o9TFAnrk014545 for ; Fri, 29 Oct 2010 10:10:49 -0500 (CDT) Received: from psmtp.com (na3sys009amx223.postini.com [74.125.149.63]) by red.ext.ti.com (8.13.7/8.13.7) with SMTP id o9TFAmN9030574 for ; Fri, 29 Oct 2010 10:10:48 -0500 Received: from source ([200.52.114.70]) by na3sys009amx223.postini.com ([74.125.148.10]) with SMTP; Fri, 29 Oct 2010 11:10:48 EDT Received: by victor-desktop (Postfix, from userid 1000) id 6E046581D4B; Fri, 29 Oct 2010 10:10:46 -0500 (CDT) From: To: Subject: [PATCH v6 9/9] davinci: USB1.1 support for Omapl138-Hawkboard Date: Fri, 29 Oct 2010 10:10:45 -0500 Message-Id: <1288365045-2709-10-git-send-email-vm.rod25@gmail.com> X-Mailer: git-send-email 1.7.0.4 In-Reply-To: <1288365045-2709-1-git-send-email-vm.rod25@gmail.com> References: <1288365045-2709-1-git-send-email-vm.rod25@gmail.com> X-pstn-neptune: 0/0/0.00/0 X-pstn-levels: (S:62.78330/99.90000 CV:99.9000 FC:95.5390 LC:95.5390 R:95.9108 P:95.9108 M:97.0282 C:98.6951 ) X-pstn-settings: 2 (0.5000:0.5000) s cv gt3 gt2 gt1 r p m c X-pstn-addresses: from [db-null] Cc: alsa-devel@alsa-project.org, sshtylyov@mvista.com, broonie@opensource.wolfsonmicro.com, lrg@slimlogic.co.uk X-BeenThere: davinci-linux-open-source@linux.davincidsp.com X-Mailman-Version: 2.1.12 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: davinci-linux-open-source-bounces+patchwork-davinci=patchwork.kernel.org@linux.davincidsp.com Errors-To: davinci-linux-open-source-bounces+patchwork-davinci=patchwork.kernel.org@linux.davincidsp.com X-Greylist: Sender succeeded STARTTLS authentication, not delayed by milter-greylist-4.2.3 (demeter1.kernel.org [140.211.167.41]); Fri, 29 Oct 2010 15:11:33 +0000 (UTC) diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 02e54fa..5c8202b 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -26,6 +26,9 @@ #define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) #define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) +#define DA850_USB1_VBUS_PIN GPIO_TO_PIN(2, 4) +#define DA850_USB1_OC_PIN GPIO_TO_PIN(6, 13) + static short omapl138_hawk_mii_pins[] __initdata = { DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, @@ -204,6 +207,108 @@ static __init void omapl138_hawk_mmc_init(void) __func__, ret); } +static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id); +static da8xx_ocic_handler_t hawk_usb_ocic_handler; + +static const short da850_hawk_usb11_pins[] = { + DA850_GPIO2_4, DA850_GPIO6_13, + -1 +}; + +static int hawk_usb_set_power(unsigned port, int on) +{ + gpio_set_value(DA850_USB1_VBUS_PIN, on); + return 0; +} + +static int hawk_usb_get_power(unsigned port) +{ + return gpio_get_value(DA850_USB1_VBUS_PIN); +} + +static int hawk_usb_get_oci(unsigned port) +{ + return !gpio_get_value(DA850_USB1_OC_PIN); +} + +static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler) +{ + int irq = gpio_to_irq(DA850_USB1_OC_PIN); + int error = 0; + + if (handler != NULL) { + hawk_usb_ocic_handler = handler; + + error = request_irq(irq, omapl138_hawk_usb_ocic_irq, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + "OHCI over-current indicator", NULL); + if (error) + pr_err(KERN_ERR "%s: could not request IRQ to watch " + "over-current indicator changes\n", __func__); + } else + free_irq(irq, NULL); + + return error; +} + +static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = { + .set_power = hawk_usb_set_power, + .get_power = hawk_usb_get_power, + .get_oci = hawk_usb_get_oci, + .ocic_notify = hawk_usb_ocic_notify, + /* TPS2087 switch @ 5V */ + .potpgt = (3 + 1) / 2, /* 3 ms max */ +}; + +static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id) +{ + hawk_usb_ocic_handler(&omapl138_hawk_usb11_pdata, 1); + return IRQ_HANDLED; +} + +static __init void omapl138_hawk_usb_init(void) +{ + int ret; + u32 cfgchip2; + + ret = davinci_cfg_reg_list(da850_hawk_usb11_pins); + if (ret) { + pr_warning("%s: USB 1.1 PinMux setup failed: %d\n", + __func__, ret); + return; + } + + /* + * Setup the Ref. clock frequency for the HAWK at 24 MHz. + */ + cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + cfgchip2 &= ~CFGCHIP2_REFFREQ; + cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; + __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + + ret = gpio_request_one(DA850_USB1_VBUS_PIN, + GPIOF_DIR_OUT, "USB1 VBUS"); + if (ret < 0) { + pr_err(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " + "power control: %d\n", __func__, ret); + return; + } + + ret = gpio_request_one(DA850_USB1_OC_PIN, + GPIOF_DIR_IN, "USB1 OC"); + if (ret < 0) { + pr_err(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " + "over-current indicator: %d\n", __func__, ret); + return; + } + + ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata); + if (ret) + pr_warning("%s: USB 1.1 registration failed: %d\n", + __func__, ret); +} + static struct davinci_uart_config omapl138_hawk_uart_config __initdata = { .enabled_uarts = 0x7, }; @@ -236,6 +341,8 @@ static __init void omapl138_hawk_init(void) omapl138_hawk_mmc_init(); + omapl138_hawk_usb_init(); + ret = da8xx_register_watchdog(); if (ret) pr_warning("omapl138_hawk_init: "