@@ -842,6 +842,33 @@ struct da850_opp {
unsigned int cvdd_max; /* in uV */
};
+static const struct da850_opp da850_opp_456 = {
+ .freq = 456000,
+ .prediv = 1,
+ .mult = 19,
+ .postdiv = 1,
+ .cvdd_min = 1300000,
+ .cvdd_max = 1350000,
+};
+
+static const struct da850_opp da850_opp_408 = {
+ .freq = 408000,
+ .prediv = 1,
+ .mult = 17,
+ .postdiv = 1,
+ .cvdd_min = 1300000,
+ .cvdd_max = 1350000,
+};
+
+static const struct da850_opp da850_opp_372 = {
+ .freq = 372000,
+ .prediv = 1,
+ .mult = 31,
+ .postdiv = 2,
+ .cvdd_min = 1200000,
+ .cvdd_max = 1320000,
+};
+
static const struct da850_opp da850_opp_300 = {
.freq = 300000,
.prediv = 1,
@@ -876,6 +903,9 @@ static const struct da850_opp da850_opp_96 = {
}
static struct cpufreq_frequency_table da850_freq_table[] = {
+ OPP(456),
+ OPP(408),
+ OPP(372),
OPP(300),
OPP(200),
OPP(96),
@@ -886,6 +916,19 @@ static struct cpufreq_frequency_table da850_freq_table[] = {
};
#ifdef CONFIG_REGULATOR
+static int da850_set_voltage(unsigned int index);
+static int da850_regulator_init(void);
+#endif
+
+static struct davinci_cpufreq_config cpufreq_info = {
+ .freq_table = da850_freq_table,
+#ifdef CONFIG_REGULATOR
+ .init = da850_regulator_init,
+ .set_voltage = da850_set_voltage,
+#endif
+};
+
+#ifdef CONFIG_REGULATOR
static struct regulator *cvdd;
static int da850_set_voltage(unsigned int index)
@@ -895,7 +938,7 @@ static int da850_set_voltage(unsigned int index)
if (!cvdd)
return -ENODEV;
- opp = (struct da850_opp *) da850_freq_table[index].index;
+ opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
}
@@ -912,14 +955,6 @@ static int da850_regulator_init(void)
}
#endif
-static struct davinci_cpufreq_config cpufreq_info = {
- .freq_table = &da850_freq_table[0],
-#ifdef CONFIG_REGULATOR
- .init = da850_regulator_init,
- .set_voltage = da850_set_voltage,
-#endif
-};
-
static struct platform_device da850_cpufreq_device = {
.name = "cpufreq-davinci",
.dev = {
@@ -928,12 +963,22 @@ static struct platform_device da850_cpufreq_device = {
.id = -1,
};
+unsigned int da850_max_speed = 300000;
+
int __init da850_register_cpufreq(char *async_clk)
{
+ int i;
+
/* cpufreq driver can help keep an "async" clock constant */
if (async_clk)
clk_add_alias("async", da850_cpufreq_device.name,
async_clk, NULL);
+ for (i = 0; i < ARRAY_SIZE(da850_freq_table); i++) {
+ if (da850_freq_table[i].frequency <= da850_max_speed) {
+ cpufreq_info.freq_table = &da850_freq_table[i];
+ break;
+ }
+ }
return platform_device_register(&da850_cpufreq_device);
}
@@ -942,17 +987,18 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
int i, ret = 0, diff;
unsigned int best = (unsigned int) -1;
+ struct cpufreq_frequency_table *table = cpufreq_info.freq_table;
rate /= 1000; /* convert to kHz */
- for (i = 0; da850_freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
- diff = da850_freq_table[i].frequency - rate;
+ for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
+ diff = table[i].frequency - rate;
if (diff < 0)
diff = -diff;
if (diff < best) {
best = diff;
- ret = da850_freq_table[i].frequency;
+ ret = table[i].frequency;
}
}
@@ -973,7 +1019,7 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index)
struct pll_data *pll = clk->pll_data;
int ret;
- opp = (struct da850_opp *) da850_freq_table[index].index;
+ opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
prediv = opp->prediv;
mult = opp->mult;
postdiv = opp->postdiv;
@@ -28,6 +28,13 @@ extern void __iomem *da8xx_syscfg0_base;
extern void __iomem *da8xx_syscfg1_base;
/*
+ * If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade
+ * (than the regular 300Mhz variant), the board code should set this up
+ * with the supported speed before calling da850_register_cpufreq().
+ */
+extern unsigned int da850_max_speed;
+
+/*
* The cp_intc interrupt controller for the da8xx isn't in the same
* chunk of physical memory space as the other registers (like it is
* on the davincis) so it needs to be mapped separately. It will be