From patchwork Wed Dec 15 09:11:49 2010 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Manjunath Hadli X-Patchwork-Id: 412851 Received: from arroyo.ext.ti.com (arroyo.ext.ti.com [192.94.94.40]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id oBF9Fva9018817 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK) for ; Wed, 15 Dec 2010 09:16:20 GMT Received: from dlep34.itg.ti.com ([157.170.170.115]) by arroyo.ext.ti.com (8.13.7/8.13.7) with ESMTP id oBF9DV2Q015747 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Wed, 15 Dec 2010 03:13:51 -0600 Received: from linux.omap.com (localhost [127.0.0.1]) by dlep34.itg.ti.com (8.13.7/8.13.7) with ESMTP id oBF9DSbp014441; Wed, 15 Dec 2010 03:13:28 -0600 (CST) Received: from linux.omap.com (localhost [127.0.0.1]) by linux.omap.com (Postfix) with ESMTP id 7FF7780631; Wed, 15 Dec 2010 03:13:26 -0600 (CST) X-Original-To: davinci-linux-open-source@linux.davincidsp.com Delivered-To: davinci-linux-open-source@linux.davincidsp.com Received: from dbdp31.itg.ti.com (dbdp31.itg.ti.com [172.24.170.98]) by linux.omap.com (Postfix) with ESMTP id 6B7228062C for ; Wed, 15 Dec 2010 03:11:51 -0600 (CST) Received: from psplinux051.india.ti.com (localhost [127.0.0.1]) by dbdp31.itg.ti.com (8.13.8/8.13.8) with ESMTP id oBF9Bnll005745; Wed, 15 Dec 2010 14:41:50 +0530 (IST) Received: from psplinux051.india.ti.com (localhost [127.0.0.1]) by psplinux051.india.ti.com (8.13.1/8.13.1) with ESMTP id oBF9BnNT012823; Wed, 15 Dec 2010 14:41:49 +0530 Received: (from x0144960@localhost) by psplinux051.india.ti.com (8.13.1/8.13.1/Submit) id oBF9Bn0m012820; Wed, 15 Dec 2010 14:41:49 +0530 From: Manjunath Hadli To: LMML Subject: [PATCH v6 7/7] davinci vpbe: Readme text for Dm6446 vpbe Date: Wed, 15 Dec 2010 14:41:49 +0530 Message-Id: <1292404309-12791-1-git-send-email-manjunath.hadli@ti.com> X-Mailer: git-send-email 1.6.2.4 Cc: dlos , Mauro Carvalho Chehab X-BeenThere: davinci-linux-open-source@linux.davincidsp.com X-Mailman-Version: 2.1.12 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: davinci-linux-open-source-bounces@linux.davincidsp.com Errors-To: davinci-linux-open-source-bounces@linux.davincidsp.com X-Greylist: Sender succeeded STARTTLS authentication, not delayed by milter-greylist-4.2.3 (demeter1.kernel.org [140.211.167.41]); Wed, 15 Dec 2010 09:16:23 +0000 (UTC) diff --git a/Documentation/video4linux/README.davinci-vpbe b/Documentation/video4linux/README.davinci-vpbe new file mode 100644 index 0000000..3ff2dc3 --- /dev/null +++ b/Documentation/video4linux/README.davinci-vpbe @@ -0,0 +1,100 @@ + + VPBE V4L2 driver design + ====================================================================== + + File partitioning + ----------------- + V4L2 display device driver + drivers/media/video/davinci/vpbe_display.c + drivers/media/video/davinci/vpbe_display.h + + VPBE display controller + drivers/media/video/davinci/vpbe.c + drivers/media/video/davinci/vpbe.h + + VPBE venc sub device driver + drivers/media/video/davinci/vpbe_venc.c + drivers/media/video/davinci/vpbe_venc.h + drivers/media/video/davinci/vpbe_venc_regs.h + + VPBE osd driver + drivers/media/video/davinci/vpbe_osd.c + drivers/media/video/davinci/vpbe_osd.h + drivers/media/video/davinci/vpbe_osd_regs.h + + Functional partitioning + ----------------------- + + Consists of the following (in the same order as the list under file + partitioning):- + + 1. V4L2 display driver + Implements video2 and video3 device nodes and + provides v4l2 device interface to manage VID0 and VID1 layers. + + 2. Display controller + Loads up venc, osd and external encoders such as ths8200. It provides + a set of API calls to V4L2 drivers to set the output/standards + in the venc or external sub devices. It also provides + a device object to access the services from osd sub device + using sub device ops. The connection of external encoders to venc LCD + controller port is done at init time based on default output and standard + selection or at run time when application change the output through + V4L2 IOCTLs. + + When connetected to an external encoder, vpbe controller is also responsible + for setting up the interface between venc and external encoders based on + board specific settings (specified in board-xxx-evm.c). This allows + interfacing external encoders such as ths8200. The setup_if_config() + is implemented for this as well as configure_venc() (part of the next patch) + API to set timings in venc for a specific display resolution. As of this + patch series, the interconnection and enabling ans setting of the external + encoders is not present, and would be a part of the next patch series. + + 3. Venc subdevice + Responsible for setting outputs provided through internal dacs and also + setting timings at LCD controller port when external encoders are connected + at the port or LCD panel timings required. When external encoder/LCD panel + is connected, the timings for a specific standard/preset is retrieved from + the board specific table and the values are used to set the timings in + venc using non-standard timing mode. + + Support LCD Panel displays using the venc. For example to support a Logic + PD display, it requires setting up the LCD controller port with a set of + timings for the resolution supported and setting the dot clock. So we could + add the available outputs as a board specific entry (i.e add the "LogicPD" + output name to board-xxx-evm.c). A table of timings for various LCDs + supported can be maintained in the board specific setup file to support + various LCD displays. + + 4. osd subdevice + Osd subdevice implements all osd layer management and hardware specific + features. In the legacfy drivers (LSPxxx), the hardware specific features + are configured through proprietary IOCTLs at the fb device interface. Since + subdevices are going to support device nodes, application will be able + to configure the hardware feature directly by opening the osd subdevice + node and by calling the related IOCTL. So these proprietary IOCTLs are + to be removed from the FB Device driver when doing up port of these drivers to + mainline kernel. The V4L2 and FB device nodes supports only IOCTLS as per + the associated spec. The rest of the IOCTLs are to be moved to osd and + venc subdevices. + + Current status:- + + A build tested version of vpbe controller is available. + + Following are TBDs. + + vpbe display controller + - review and modify the handling of external encoders. + - add support for selecting external encoder as default at probe time. + + vpbe venc sub device + - add timings for supporting ths8200 + - add support for LogicPD LCD. + + v4l2 driver + - A version is already developed which is to be cleaned up and unit tested + + FB drivers + - Add support for fbdev drivers.- Ready and part of subsequent patches.