From patchwork Fri Mar 4 23:00:17 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pratheesh Gangadhar X-Patchwork-Id: 610411 Received: from arroyo.ext.ti.com (arroyo.ext.ti.com [192.94.94.40]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id p24N2TUO024246 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK) for ; Fri, 4 Mar 2011 23:02:50 GMT Received: from dlep33.itg.ti.com ([157.170.170.112]) by arroyo.ext.ti.com (8.13.7/8.13.7) with ESMTP id p24N0VpN022648 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 4 Mar 2011 17:00:31 -0600 Received: from linux.omap.com (localhost [127.0.0.1]) by dlep33.itg.ti.com (8.13.7/8.13.7) with ESMTP id p24N0V4v007711; Fri, 4 Mar 2011 17:00:31 -0600 (CST) Received: from linux.omap.com (localhost [127.0.0.1]) by linux.omap.com (Postfix) with ESMTP id 043CA80627; Fri, 4 Mar 2011 17:00:31 -0600 (CST) X-Original-To: davinci-linux-open-source@linux.davincidsp.com Delivered-To: davinci-linux-open-source@linux.davincidsp.com Received: from dbdp31.itg.ti.com (dbdp31.itg.ti.com [172.24.170.98]) by linux.omap.com (Postfix) with ESMTP id B042080627 for ; Fri, 4 Mar 2011 17:00:27 -0600 (CST) Received: from psplinux051.india.ti.com (localhost [127.0.0.1]) by dbdp31.itg.ti.com (8.13.8/8.13.8) with ESMTP id p24N0JHW016639; Sat, 5 Mar 2011 04:30:20 +0530 (IST) Received: from psplinux051.india.ti.com (localhost [127.0.0.1]) by psplinux051.india.ti.com (8.13.1/8.13.1) with ESMTP id p24N0JZP021250; Sat, 5 Mar 2011 04:30:19 +0530 Received: (from a0875542@localhost) by psplinux051.india.ti.com (8.13.1/8.13.1/Submit) id p24N0Jxi021247; Sat, 5 Mar 2011 04:30:19 +0530 From: Pratheesh Gangadhar To: linux-kernel@vger.kernel.org Subject: [PATCH v11 1/1] PRUSS UIO driver support Date: Sat, 5 Mar 2011 04:30:17 +0530 Message-Id: <1299279617-21108-2-git-send-email-pratheesh@ti.com> X-Mailer: git-send-email 1.6.2.4 In-Reply-To: <1299279617-21108-1-git-send-email-pratheesh@ti.com> References: <1299279617-21108-1-git-send-email-pratheesh@ti.com> Cc: davinci-linux-open-source@linux.davincidsp.com, sshtylyov@mvista.com, arnd@arndb.de, amit.chatterjee@ti.com, gregkh@suse.de, hjk@hansjkoch.de, tglx@linutronix.de, linux-arm-kernel@lists.infradead.org X-BeenThere: davinci-linux-open-source@linux.davincidsp.com X-Mailman-Version: 2.1.12 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: davinci-linux-open-source-bounces@linux.davincidsp.com Errors-To: davinci-linux-open-source-bounces@linux.davincidsp.com X-Greylist: Sender succeeded STARTTLS authentication, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Fri, 04 Mar 2011 23:02:50 +0000 (UTC) diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index bb44079..6f3ea9b 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -94,4 +94,21 @@ config UIO_NETX To compile this driver as a module, choose M here; the module will be called uio_netx. +config UIO_PRUSS + tristate "Texas Instruments PRUSS driver" + depends on ARCH_DAVINCI_DA850 + help + PRUSS driver for OMAPL138/DA850/AM18XX devices + PRUSS driver requires user space components, examples and user space + driver is available from below SVN repo - you may use anonymous login + + https://gforge.ti.com/gf/project/pru_sw/ + + More info on API is available at below wiki + + http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader + + To compile this driver as a module, choose M here: the module + will be called uio_pruss. + endif diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile index 18fd818..d4dd9a5 100644 --- a/drivers/uio/Makefile +++ b/drivers/uio/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_UIO_AEC) += uio_aec.o obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o obj-$(CONFIG_UIO_NETX) += uio_netx.o +obj-$(CONFIG_UIO_PRUSS) += uio_pruss.o diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c new file mode 100644 index 0000000..daf6e77 --- /dev/null +++ b/drivers/uio/uio_pruss.c @@ -0,0 +1,247 @@ +/* + * Programmable Real-Time Unit Sub System (PRUSS) UIO driver (uio_pruss) + * + * This driver exports PRUSS host event out interrupts and PRUSS, L3 RAM, + * and DDR RAM to user space for applications interacting with PRUSS firmware + * + * Copyright (C) 2010-11 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pruss_uio" +#define DRV_VERSION "1.0" + +static int sram_pool_sz = SZ_16K; +module_param(sram_pool_sz, int, 0); +MODULE_PARM_DESC(sram_pool_sz, "sram pool size to allocate "); + +static int extram_pool_sz = SZ_256K; +module_param(extram_pool_sz, int, 0); +MODULE_PARM_DESC(extram_pool_sz, "external ram pool size to allocate"); + +/* + * Host event IRQ numbers from PRUSS - PRUSS can generate upto 8 interrupt + * events to AINTC of ARM host processor - which can be used for IPC b/w PRUSS + * firmware and user space application, async notification from PRU firmware + * to user space application + * 3 PRU_EVTOUT0 + * 4 PRU_EVTOUT1 + * 5 PRU_EVTOUT2 + * 6 PRU_EVTOUT3 + * 7 PRU_EVTOUT4 + * 8 PRU_EVTOUT5 + * 9 PRU_EVTOUT6 + * 10 PRU_EVTOUT7 +*/ +#define MAX_PRUSS_EVT 8 + +#define PINTC_HIDISR 0x0038 +#define PINTC_HIPIR 0x0900 +#define HIPIR_NOPEND 0x80000000 +#define PINTC_HIER 0x1500 + +struct uio_pruss_dev { + struct uio_info *info; + struct clk *pruss_clk; + dma_addr_t sram_paddr; + dma_addr_t ddr_paddr; + void __iomem *prussio_vaddr; + void *sram_vaddr; + void *ddr_vaddr; + unsigned int hostirq_start; + unsigned int pintc_base; +}; + +static irqreturn_t pruss_handler(int irq, struct uio_info *info) +{ + struct uio_pruss_dev *gdev = info->priv; + int intr_bit = (irq - gdev->hostirq_start + 2); + int val, intr_mask = (1 << intr_bit); + void __iomem *base = gdev->prussio_vaddr + gdev->pintc_base; + void __iomem *intren_reg = base + PINTC_HIER; + void __iomem *intrdis_reg = base + PINTC_HIDISR; + void __iomem *intrstat_reg = base + PINTC_HIPIR + (intr_bit << 2); + + val = ioread32(intren_reg); + /* Is interrupt enabled and active ? */ + if (!(val & intr_mask) && (ioread32(intrstat_reg) & HIPIR_NOPEND)) + return IRQ_NONE; + /* Disable interrupt */ + iowrite32(intr_bit, intrdis_reg); + return IRQ_HANDLED; +} + +static void pruss_cleanup(struct platform_device *dev, + struct uio_pruss_dev *gdev) +{ + int cnt; + struct uio_info *p = gdev->info; + + for (cnt = 0; cnt < MAX_PRUSS_EVT; cnt++, p++) { + uio_unregister_device(p); + kfree(p->name); + } + iounmap(gdev->prussio_vaddr); + if (gdev->ddr_vaddr) { + dma_free_coherent(&dev->dev, extram_pool_sz, gdev->ddr_vaddr, + gdev->ddr_paddr); + } + if (gdev->sram_vaddr) + sram_free(gdev->sram_vaddr, sram_pool_sz); + kfree(gdev->info); + clk_put(gdev->pruss_clk); + kfree(gdev); +} + +static int __devinit pruss_probe(struct platform_device *dev) +{ + struct uio_info *p; + struct uio_pruss_dev *gdev; + struct resource *regs_prussio; + int ret = -ENODEV, cnt = 0, len; + struct uio_pruss_pdata *pdata = dev->dev.platform_data; + + gdev = kzalloc(sizeof(struct uio_pruss_dev), GFP_KERNEL); + if (!gdev) + return -ENOMEM; + + gdev->info = kzalloc(sizeof(*p) * MAX_PRUSS_EVT, GFP_KERNEL); + if (!gdev->info) { + kfree(gdev); + return -ENOMEM; + } + /* Power on PRU in case its not done as part of boot-loader */ + gdev->pruss_clk = clk_get(&dev->dev, "pruss"); + if (IS_ERR(gdev->pruss_clk)) { + dev_err(&dev->dev, "Failed to get clock\n"); + kfree(gdev->info); + kfree(gdev); + ret = PTR_ERR(gdev->pruss_clk); + return ret; + } else { + clk_enable(gdev->pruss_clk); + } + + regs_prussio = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!regs_prussio) { + dev_err(&dev->dev, "No PRUSS I/O resource specified\n"); + goto out_free; + } + + if (!regs_prussio->start) { + dev_err(&dev->dev, "Invalid memory resource\n"); + goto out_free; + } + + gdev->sram_vaddr = sram_alloc(sram_pool_sz, &(gdev->sram_paddr)); + if (!gdev->sram_vaddr) { + dev_err(&dev->dev, "Could not allocate SRAM pool\n"); + goto out_free; + } + + gdev->ddr_vaddr = dma_alloc_coherent(&dev->dev, extram_pool_sz, + &(gdev->ddr_paddr), GFP_KERNEL | GFP_DMA); + if (!gdev->ddr_vaddr) { + dev_err(&dev->dev, "Could not allocate external memory\n"); + goto out_free; + } + + len = resource_size(regs_prussio); + gdev->prussio_vaddr = ioremap(regs_prussio->start, len); + if (!gdev->prussio_vaddr) { + dev_err(&dev->dev, "Can't remap PRUSS I/O address range\n"); + goto out_free; + } + + gdev->pintc_base = pdata->pintc_base; + gdev->hostirq_start = platform_get_irq(dev, 0); + + for (cnt = 0, p = gdev->info; cnt < MAX_PRUSS_EVT; cnt++, p++) { + p->mem[0].addr = regs_prussio->start; + p->mem[0].size = resource_size(regs_prussio); + p->mem[0].memtype = UIO_MEM_PHYS; + + p->mem[1].addr = gdev->sram_paddr; + p->mem[1].size = sram_pool_sz; + p->mem[1].memtype = UIO_MEM_PHYS; + + p->mem[2].addr = gdev->ddr_paddr; + p->mem[2].size = extram_pool_sz; + p->mem[2].memtype = UIO_MEM_PHYS; + + p->name = kasprintf(GFP_KERNEL, "pruss_evt%d", cnt); + p->version = DRV_VERSION; + + /* Register PRUSS IRQ lines */ + p->irq = gdev->hostirq_start + cnt; + p->handler = pruss_handler; + p->priv = gdev; + + ret = uio_register_device(&dev->dev, p); + if (ret < 0) + goto out_free; + } + + platform_set_drvdata(dev, gdev); + return 0; + +out_free: + pruss_cleanup(dev, gdev); + return ret; +} + +static int __devexit pruss_remove(struct platform_device *dev) +{ + struct uio_pruss_dev *gdev = platform_get_drvdata(dev); + + pruss_cleanup(dev, gdev); + platform_set_drvdata(dev, NULL); + return 0; +} + +static struct platform_driver pruss_driver = { + .probe = pruss_probe, + .remove = __devexit_p(pruss_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init pruss_init_module(void) +{ + return platform_driver_register(&pruss_driver); +} + +module_init(pruss_init_module); + +static void __exit pruss_exit_module(void) +{ + platform_driver_unregister(&pruss_driver); +} + +module_exit(pruss_exit_module); + +MODULE_LICENSE("GPL v2"); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("Amit Chatterjee "); +MODULE_AUTHOR("Pratheesh Gangadhar "); diff --git a/include/linux/platform_data/uio_pruss.h b/include/linux/platform_data/uio_pruss.h new file mode 100644 index 0000000..f39140a --- /dev/null +++ b/include/linux/platform_data/uio_pruss.h @@ -0,0 +1,25 @@ +/* + * include/linux/platform_data/uio_pruss.h + * + * Platform data for uio_pruss driver + * + * Copyright (C) 2010-11 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _UIO_PRUSS_H_ +#define _UIO_PRUSS_H_ + +/* To configure the PRUSS INTC base offset for UIO driver */ +struct uio_pruss_pdata { + u32 pintc_base; +}; +#endif /* _UIO_PRUSS_H_ */