Message ID | 1348241088-1017-1-git-send-email-prakash.pm@ti.com (mailing list archive) |
---|---|
State | Awaiting Upstream |
Headers | show |
On Fri, Sep 21, 2012 at 20:54:48, Manjunathappa, Prakash wrote: > Add pm_runtime support to the da8xx-fb frame buffer driver. > > Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> > --- > Applies on top of patch "da8xx-fb: enable LCDC if FB is unblanked" under review. > > drivers/video/da8xx-fb.c | 24 +++++++++++++----------- > 1 files changed, 13 insertions(+), 11 deletions(-) > > diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c > index af2aa38..17c00b2 100644 > --- a/drivers/video/da8xx-fb.c > +++ b/drivers/video/da8xx-fb.c > @@ -26,6 +26,7 @@ > #include <linux/device.h> > #include <linux/platform_device.h> > #include <linux/uaccess.h> > +#include <linux/pm_runtime.h> > #include <linux/interrupt.h> > #include <linux/wait.h> > #include <linux/clk.h> > @@ -1037,8 +1038,8 @@ static int __devexit fb_remove(struct platform_device *dev) > dma_free_coherent(NULL, par->vram_size, par->vram_virt, > par->vram_phys); > free_irq(par->irq, par); > - clk_disable(par->lcdc_clk); > - clk_put(par->lcdc_clk); > + pm_runtime_put_sync(&dev->dev); > + pm_runtime_disable(&dev->dev); > framebuffer_release(info); > iounmap((void __iomem *)da8xx_fb_reg_base); > release_mem_region(lcdc_regs->start, resource_size(lcdc_regs)); > @@ -1272,9 +1273,9 @@ static int __devinit fb_probe(struct platform_device *device) > ret = -ENODEV; > goto err_ioremap; > } > - ret = clk_enable(fb_clk); > - if (ret) > - goto err_clk_put; > + > + pm_runtime_enable(&device->dev); > + pm_runtime_get_sync(&device->dev); > > /* Determine LCD IP Version */ > switch (lcdc_read(LCD_PID_REG)) { > @@ -1302,7 +1303,7 @@ static int __devinit fb_probe(struct platform_device *device) > if (i == ARRAY_SIZE(known_lcd_panels)) { > dev_err(&device->dev, "GLCD: No valid panel found\n"); > ret = -ENODEV; > - goto err_clk_disable; > + goto err_pm_runtime_disable; > } else > dev_info(&device->dev, "GLCD: Found %s panel\n", > fb_pdata->type); > @@ -1314,7 +1315,7 @@ static int __devinit fb_probe(struct platform_device *device) > if (!da8xx_fb_info) { > dev_dbg(&device->dev, "Memory allocation failed for fb_info\n"); > ret = -ENOMEM; > - goto err_clk_disable; > + goto err_pm_runtime_disable; > } > > par = da8xx_fb_info->par; > @@ -1476,8 +1477,9 @@ err_release_fb_mem: > err_release_fb: > framebuffer_release(da8xx_fb_info); > > -err_clk_disable: > - clk_disable(fb_clk); > +err_pm_runtime_disable: > + pm_runtime_put_sync(&device->dev); > + pm_runtime_disable(&device->dev); > > err_clk_put: > clk_put(fb_clk); > @@ -1503,7 +1505,7 @@ static int fb_suspend(struct platform_device *dev, pm_message_t state) > > fb_set_suspend(info, 1); > lcd_disable_raster(true); > - clk_disable(par->lcdc_clk); > + pm_runtime_put(&dev->dev); Isn't here you should use pm_runtime_put_sync()?? Thanks, Vaibhv > console_unlock(); > > return 0; > @@ -1514,7 +1516,7 @@ static int fb_resume(struct platform_device *dev) > struct da8xx_fb_par *par = info->par; > > console_lock(); > - clk_enable(par->lcdc_clk); > + pm_runtime_get_sync(&dev->dev); > if (par->blank == FB_BLANK_UNBLANK) { > lcd_enable_raster(); > > -- > 1.7.0.4 > > _______________________________________________ > Davinci-linux-open-source mailing list > Davinci-linux-open-source@linux.davincidsp.com > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source >
Hi Vaibhav, On Fri, Sep 21, 2012 at 21:03:15, Hiremath, Vaibhav wrote: > On Fri, Sep 21, 2012 at 20:54:48, Manjunathappa, Prakash wrote: > > Add pm_runtime support to the da8xx-fb frame buffer driver. > > > > Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> > > --- > > Applies on top of patch "da8xx-fb: enable LCDC if FB is unblanked" under review. > > > > drivers/video/da8xx-fb.c | 24 +++++++++++++----------- > > 1 files changed, 13 insertions(+), 11 deletions(-) > > > > diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c > > index af2aa38..17c00b2 100644 > > --- a/drivers/video/da8xx-fb.c > > +++ b/drivers/video/da8xx-fb.c > > @@ -26,6 +26,7 @@ > > #include <linux/device.h> > > #include <linux/platform_device.h> > > #include <linux/uaccess.h> > > +#include <linux/pm_runtime.h> > > #include <linux/interrupt.h> > > #include <linux/wait.h> > > #include <linux/clk.h> > > @@ -1037,8 +1038,8 @@ static int __devexit fb_remove(struct platform_device *dev) > > dma_free_coherent(NULL, par->vram_size, par->vram_virt, > > par->vram_phys); > > free_irq(par->irq, par); > > - clk_disable(par->lcdc_clk); > > - clk_put(par->lcdc_clk); > > + pm_runtime_put_sync(&dev->dev); > > + pm_runtime_disable(&dev->dev); > > framebuffer_release(info); > > iounmap((void __iomem *)da8xx_fb_reg_base); > > release_mem_region(lcdc_regs->start, resource_size(lcdc_regs)); > > @@ -1272,9 +1273,9 @@ static int __devinit fb_probe(struct platform_device *device) > > ret = -ENODEV; > > goto err_ioremap; > > } > > - ret = clk_enable(fb_clk); > > - if (ret) > > - goto err_clk_put; > > + > > + pm_runtime_enable(&device->dev); > > + pm_runtime_get_sync(&device->dev); > > > > /* Determine LCD IP Version */ > > switch (lcdc_read(LCD_PID_REG)) { > > @@ -1302,7 +1303,7 @@ static int __devinit fb_probe(struct platform_device *device) > > if (i == ARRAY_SIZE(known_lcd_panels)) { > > dev_err(&device->dev, "GLCD: No valid panel found\n"); > > ret = -ENODEV; > > - goto err_clk_disable; > > + goto err_pm_runtime_disable; > > } else > > dev_info(&device->dev, "GLCD: Found %s panel\n", > > fb_pdata->type); > > @@ -1314,7 +1315,7 @@ static int __devinit fb_probe(struct platform_device *device) > > if (!da8xx_fb_info) { > > dev_dbg(&device->dev, "Memory allocation failed for fb_info\n"); > > ret = -ENOMEM; > > - goto err_clk_disable; > > + goto err_pm_runtime_disable; > > } > > > > par = da8xx_fb_info->par; > > @@ -1476,8 +1477,9 @@ err_release_fb_mem: > > err_release_fb: > > framebuffer_release(da8xx_fb_info); > > > > -err_clk_disable: > > - clk_disable(fb_clk); > > +err_pm_runtime_disable: > > + pm_runtime_put_sync(&device->dev); > > + pm_runtime_disable(&device->dev); > > > > err_clk_put: > > clk_put(fb_clk); > > @@ -1503,7 +1505,7 @@ static int fb_suspend(struct platform_device *dev, pm_message_t state) > > > > fb_set_suspend(info, 1); > > lcd_disable_raster(true); > > - clk_disable(par->lcdc_clk); > > + pm_runtime_put(&dev->dev); > > Isn't here you should use pm_runtime_put_sync()?? > Yes, I will correct it send next version. Thanks, Prakash > Thanks, > Vaibhv > > > console_unlock(); > > > > return 0; > > @@ -1514,7 +1516,7 @@ static int fb_resume(struct platform_device *dev) > > struct da8xx_fb_par *par = info->par; > > > > console_lock(); > > - clk_enable(par->lcdc_clk); > > + pm_runtime_get_sync(&dev->dev); > > if (par->blank == FB_BLANK_UNBLANK) { > > lcd_enable_raster(); > > > > -- > > 1.7.0.4 > > > > _______________________________________________ > > Davinci-linux-open-source mailing list > > Davinci-linux-open-source@linux.davincidsp.com > > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > > >
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index af2aa38..17c00b2 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -26,6 +26,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/uaccess.h> +#include <linux/pm_runtime.h> #include <linux/interrupt.h> #include <linux/wait.h> #include <linux/clk.h> @@ -1037,8 +1038,8 @@ static int __devexit fb_remove(struct platform_device *dev) dma_free_coherent(NULL, par->vram_size, par->vram_virt, par->vram_phys); free_irq(par->irq, par); - clk_disable(par->lcdc_clk); - clk_put(par->lcdc_clk); + pm_runtime_put_sync(&dev->dev); + pm_runtime_disable(&dev->dev); framebuffer_release(info); iounmap((void __iomem *)da8xx_fb_reg_base); release_mem_region(lcdc_regs->start, resource_size(lcdc_regs)); @@ -1272,9 +1273,9 @@ static int __devinit fb_probe(struct platform_device *device) ret = -ENODEV; goto err_ioremap; } - ret = clk_enable(fb_clk); - if (ret) - goto err_clk_put; + + pm_runtime_enable(&device->dev); + pm_runtime_get_sync(&device->dev); /* Determine LCD IP Version */ switch (lcdc_read(LCD_PID_REG)) { @@ -1302,7 +1303,7 @@ static int __devinit fb_probe(struct platform_device *device) if (i == ARRAY_SIZE(known_lcd_panels)) { dev_err(&device->dev, "GLCD: No valid panel found\n"); ret = -ENODEV; - goto err_clk_disable; + goto err_pm_runtime_disable; } else dev_info(&device->dev, "GLCD: Found %s panel\n", fb_pdata->type); @@ -1314,7 +1315,7 @@ static int __devinit fb_probe(struct platform_device *device) if (!da8xx_fb_info) { dev_dbg(&device->dev, "Memory allocation failed for fb_info\n"); ret = -ENOMEM; - goto err_clk_disable; + goto err_pm_runtime_disable; } par = da8xx_fb_info->par; @@ -1476,8 +1477,9 @@ err_release_fb_mem: err_release_fb: framebuffer_release(da8xx_fb_info); -err_clk_disable: - clk_disable(fb_clk); +err_pm_runtime_disable: + pm_runtime_put_sync(&device->dev); + pm_runtime_disable(&device->dev); err_clk_put: clk_put(fb_clk); @@ -1503,7 +1505,7 @@ static int fb_suspend(struct platform_device *dev, pm_message_t state) fb_set_suspend(info, 1); lcd_disable_raster(true); - clk_disable(par->lcdc_clk); + pm_runtime_put(&dev->dev); console_unlock(); return 0; @@ -1514,7 +1516,7 @@ static int fb_resume(struct platform_device *dev) struct da8xx_fb_par *par = info->par; console_lock(); - clk_enable(par->lcdc_clk); + pm_runtime_get_sync(&dev->dev); if (par->blank == FB_BLANK_UNBLANK) { lcd_enable_raster();
Add pm_runtime support to the da8xx-fb frame buffer driver. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> --- Applies on top of patch "da8xx-fb: enable LCDC if FB is unblanked" under review. drivers/video/da8xx-fb.c | 24 +++++++++++++----------- 1 files changed, 13 insertions(+), 11 deletions(-)