diff mbox

[v2,2/6] ARM: davinci: da850: add DT node for mdio device

Message ID 1359380879-26306-3-git-send-email-prabhakar.lad@ti.com (mailing list archive)
State Changes Requested
Headers show

Commit Message

Lad, Prabhakar Jan. 28, 2013, 1:47 p.m. UTC
From: Lad, Prabhakar <prabhakar.lad@ti.com>

Add mdio device tree node information to da850 by
providing register details and bus frequency of mdio.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-source@linux.davincidsp.com
Cc: netdev@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
 arch/arm/boot/dts/da850-evm.dts |    3 +++
 arch/arm/boot/dts/da850.dtsi    |    7 +++++++
 2 files changed, 10 insertions(+), 0 deletions(-)

Comments

Sekhar Nori Feb. 3, 2013, 11:53 a.m. UTC | #1
On 1/28/2013 7:17 PM, Prabhakar Lad wrote:
> From: Lad, Prabhakar <prabhakar.lad@ti.com>
> 
> Add mdio device tree node information to da850 by
> providing register details and bus frequency of mdio.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Cc: davinci-linux-open-source@linux.davincidsp.com
> Cc: netdev@vger.kernel.org
> Cc: devicetree-discuss@lists.ozlabs.org
> Cc: Sekhar Nori <nsekhar@ti.com>
> Cc: Heiko Schocher <hs@denx.de>
> ---
>  arch/arm/boot/dts/da850-evm.dts |    3 +++
>  arch/arm/boot/dts/da850.dtsi    |    7 +++++++
>  2 files changed, 10 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index 98c1a48..a319491 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -27,6 +27,9 @@
>  		serial2: serial@1d0d000 {
>  			status = "okay";
>  		};
> +		mdio: davinci_mdio@1e24000 {

This should just be:

mdio: mdio@1e24000

inline with how we avoid adding davinci prefix to each node name.

> +			status = "okay";
> +		};
>  	};
>  	nand_cs3@62000000 {
>  		status = "okay";
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 7c84822..ba28f2d 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -81,6 +81,13 @@
>  			interrupts = <61>;
>  			status = "disabled";
>  		};
> +		mdio: davinci_mdio@1e24000 {
> +			compatible = "ti,davinci_mdio";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x224000 0x1000>;
> +			bus_freq = <2200000>;

The bus frequency is board specific and it is better this is defined in
da850-evm.dts

Thanks,
Sekhar
Lad, Prabhakar Feb. 3, 2013, 12:17 p.m. UTC | #2
Sekhar,

On Sun, Feb 3, 2013 at 5:23 PM, Sekhar Nori <nsekhar@ti.com> wrote:
> On 1/28/2013 7:17 PM, Prabhakar Lad wrote:
>> From: Lad, Prabhakar <prabhakar.lad@ti.com>
>>
>> Add mdio device tree node information to da850 by
>> providing register details and bus frequency of mdio.
>>
>> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> Cc: davinci-linux-open-source@linux.davincidsp.com
>> Cc: netdev@vger.kernel.org
>> Cc: devicetree-discuss@lists.ozlabs.org
>> Cc: Sekhar Nori <nsekhar@ti.com>
>> Cc: Heiko Schocher <hs@denx.de>
>> ---
>>  arch/arm/boot/dts/da850-evm.dts |    3 +++
>>  arch/arm/boot/dts/da850.dtsi    |    7 +++++++
>>  2 files changed, 10 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
>> index 98c1a48..a319491 100644
>> --- a/arch/arm/boot/dts/da850-evm.dts
>> +++ b/arch/arm/boot/dts/da850-evm.dts
>> @@ -27,6 +27,9 @@
>>               serial2: serial@1d0d000 {
>>                       status = "okay";
>>               };
>> +             mdio: davinci_mdio@1e24000 {
>
> This should just be:
>
> mdio: mdio@1e24000
>
> inline with how we avoid adding davinci prefix to each node name.
>
Ok

>> +                     status = "okay";
>> +             };
>>       };
>>       nand_cs3@62000000 {
>>               status = "okay";
>> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
>> index 7c84822..ba28f2d 100644
>> --- a/arch/arm/boot/dts/da850.dtsi
>> +++ b/arch/arm/boot/dts/da850.dtsi
>> @@ -81,6 +81,13 @@
>>                       interrupts = <61>;
>>                       status = "disabled";
>>               };
>> +             mdio: davinci_mdio@1e24000 {
>> +                     compatible = "ti,davinci_mdio";
>> +                     #address-cells = <1>;
>> +                     #size-cells = <0>;
>> +                     reg = <0x224000 0x1000>;
>> +                     bus_freq = <2200000>;
>
> The bus frequency is board specific and it is better this is defined in
> da850-evm.dts
>
Ok I'll move this to dts file.

Regards,
--Prabhakar

> Thanks,
> Sekhar
diff mbox

Patch

diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 98c1a48..a319491 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -27,6 +27,9 @@ 
 		serial2: serial@1d0d000 {
 			status = "okay";
 		};
+		mdio: davinci_mdio@1e24000 {
+			status = "okay";
+		};
 	};
 	nand_cs3@62000000 {
 		status = "okay";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 7c84822..ba28f2d 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -81,6 +81,13 @@ 
 			interrupts = <61>;
 			status = "disabled";
 		};
+		mdio: davinci_mdio@1e24000 {
+			compatible = "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x224000 0x1000>;
+			bus_freq = <2200000>;
+		};
 	};
 	nand_cs3@62000000 {
 		compatible = "ti,davinci-nand";