| Message ID | 1363776419-10563-4-git-send-email-prakash.pm@ti.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
Hi, On Wed, Mar 20, 2013 at 16:16:57, Manjunathappa, Prakash wrote: > Patch adds SPI1 DT node along with pinmux data. > > Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> > --- > arch/arm/boot/dts/da850.dtsi | 18 ++++++++++++++++++ > 1 files changed, 18 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi > index 3ec1bda..327fb06 100644 > --- a/arch/arm/boot/dts/da850.dtsi > +++ b/arch/arm/boot/dts/da850.dtsi > @@ -62,6 +62,14 @@ > 0x10 0x00002200 0x0000ff00 > >; > }; > + spi1_pins: pinmux_spi_pins { > + pinctrl-single,bits = < > + /* SIMO, SOMI, ENA, > + * CLK, CS[0], CS[1] > + */ > + 0x14 0x00111111 0x00ffffff Since chip select is specific to a board, let me separate it out so as to allow boards choose accordingly. Thanks, Prakash
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 3ec1bda..327fb06 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -62,6 +62,14 @@ 0x10 0x00002200 0x0000ff00 >; }; + spi1_pins: pinmux_spi_pins { + pinctrl-single,bits = < + /* SIMO, SOMI, ENA, + * CLK, CS[0], CS[1] + */ + 0x14 0x00111111 0x00ffffff + >; + }; }; serial0: serial@1c42000 { compatible = "ns16550a"; @@ -107,6 +115,16 @@ reg = <0x21000 0x1000>; status = "disabled"; }; + spi1: spi@1f0e000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,da830-spi"; + reg = <0x30e000 0x1000>; + num-cs = <4>; + ti,davinci-spi-intr-line = <1>; + interrupts = <56>; + status = "disabled"; + }; }; nand_cs3@62000000 { compatible = "ti,davinci-nand";
Patch adds SPI1 DT node along with pinmux data. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> --- arch/arm/boot/dts/da850.dtsi | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-)