diff mbox

[11/11] ARM: davinci: da850 evm: add GPIO DT data

Message ID 1369206634-6778-12-git-send-email-avinashphilip@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

avinash philip May 22, 2013, 7:10 a.m. UTC
From: KV Sujith <sujithkv@ti.com>

- Add GPIO DT Data and pinmux for DA850 EVM. GPIO is configurable differently
  on different boards. So add GPIO pinmuxing in dts file.
- Dependency: This patch is dependent on Grab-pin-control patch;
  https://patchwork.kernel.org/patch/2013751/

Signed-off-by: KV Sujith <sujithkv@ti.com>
Signed-off-by: Philip Avinash <avinashphilip@ti.com>
---
 arch/arm/boot/dts/da850-evm.dts |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Comments

Linus Walleij May 30, 2013, 6:26 p.m. UTC | #1
On Wed, May 22, 2013 at 9:10 AM, Philip Avinash <avinashphilip@ti.com> wrote:

> From: KV Sujith <sujithkv@ti.com>
>
> - Add GPIO DT Data and pinmux for DA850 EVM. GPIO is configurable differently
>   on different boards. So add GPIO pinmuxing in dts file.
> - Dependency: This patch is dependent on Grab-pin-control patch;
>   https://patchwork.kernel.org/patch/2013751/
>
> Signed-off-by: KV Sujith <sujithkv@ti.com>
> Signed-off-by: Philip Avinash <avinashphilip@ti.com>

Looks fine to me, but Tony should review this.

Yours,
Linus Walleij
diff mbox

Patch

diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index c914357..ab59e60 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -17,6 +17,20 @@ 
 	soc {
 		pmx_core: pinmux@1c14120 {
 			status = "okay";
+			gpio_pins: pinmux_gpio_pins {
+				pinctrl-single,bits = <
+					/* GPIO2_4 GPIO2_6 */
+					0x18 0x00008080 0x0000f0f0
+					/* GPIO2_8 GPIO2_15 */
+					0x14 0x80000008 0xf000000f
+					/* GPIO3_12 GPIO3_13 */
+					0x1C 0x00008800 0x0000ff00
+					/* GPIO4_0 GPIO4_1 */
+					0x28 0x88000000 0xff000000
+					/* GPIO6_9 GPIO6_10 GPIO6_13 */
+					0x34 0x08800800 0x0ff00f00
+				>;
+			};
 		};
 		serial0: serial@1c42000 {
 			status = "okay";
@@ -90,6 +104,11 @@ 
 				};
 			};
 		};
+		gpio: gpio@1e26000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio_pins>;
+		};
 	};
 	nand_cs3@62000000 {
 		status = "okay";