diff mbox

[v12,04/11] dmaengine: edma: enable build for AM33XX

Message ID 1371762407-24544-5-git-send-email-joelagnel@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Fernandes, Joel A June 20, 2013, 9:06 p.m. UTC
From: Matt Porter <mporter@ti.com>

Enable TI EDMA option on OMAP and TI_PRIV_EDMA

Signed-off-by: Matt Porter <mporter@ti.com>
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
---
 arch/arm/mach-omap2/Kconfig |    1 +
 drivers/dma/Kconfig         |    2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

Comments

Sekhar Nori June 21, 2013, 10:15 a.m. UTC | #1
On 6/21/2013 2:36 AM, Joel A Fernandes wrote:
> From: Matt Porter <mporter@ti.com>
> 
> Enable TI EDMA option on OMAP and TI_PRIV_EDMA
> 
> Signed-off-by: Matt Porter <mporter@ti.com>
> Signed-off-by: Joel A Fernandes <joelagnel@ti.com>

This will have to be taken by Tony.

Thanks,
Sekhar

> ---
>  arch/arm/mach-omap2/Kconfig |    1 +
>  drivers/dma/Kconfig         |    2 +-
>  2 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index f49cd51..f91b07f 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS
>  	select PROC_DEVICETREE if PROC_FS
>  	select SOC_BUS
>  	select SPARSE_IRQ
> +	select TI_PRIV_EDMA
>  	select USE_OF
>  	help
>  	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> index e992489..3215a3c 100644
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -213,7 +213,7 @@ config SIRF_DMA
>  
>  config TI_EDMA
>  	tristate "TI EDMA support"
> -	depends on ARCH_DAVINCI
> +	depends on ARCH_DAVINCI || ARCH_OMAP
>  	select DMA_ENGINE
>  	select DMA_VIRTUAL_CHANNELS
>  	default n
>
Tony Lindgren June 24, 2013, 10:17 a.m. UTC | #2
* Sekhar Nori <nsekhar@ti.com> [130621 03:21]:
> On 6/21/2013 2:36 AM, Joel A Fernandes wrote:
> > From: Matt Porter <mporter@ti.com>
> > 
> > Enable TI EDMA option on OMAP and TI_PRIV_EDMA
> > 
> > Signed-off-by: Matt Porter <mporter@ti.com>
> > Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
> 
> This will have to be taken by Tony.

Sekhar, please go ahead and take this one. I'll reply
to the header email of this series how it should be
queued.

For the mach-omap2/Kconfig change:

Acked-by: Tony Lindgren <tony@atomide.com>
 
> > ---
> >  arch/arm/mach-omap2/Kconfig |    1 +
> >  drivers/dma/Kconfig         |    2 +-
> >  2 files changed, 2 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> > index f49cd51..f91b07f 100644
> > --- a/arch/arm/mach-omap2/Kconfig
> > +++ b/arch/arm/mach-omap2/Kconfig
> > @@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS
> >  	select PROC_DEVICETREE if PROC_FS
> >  	select SOC_BUS
> >  	select SPARSE_IRQ
> > +	select TI_PRIV_EDMA
> >  	select USE_OF
> >  	help
> >  	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
> > diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> > index e992489..3215a3c 100644
> > --- a/drivers/dma/Kconfig
> > +++ b/drivers/dma/Kconfig
> > @@ -213,7 +213,7 @@ config SIRF_DMA
> >  
> >  config TI_EDMA
> >  	tristate "TI EDMA support"
> > -	depends on ARCH_DAVINCI
> > +	depends on ARCH_DAVINCI || ARCH_OMAP
> >  	select DMA_ENGINE
> >  	select DMA_VIRTUAL_CHANNELS
> >  	default n
> >
Sekhar Nori June 24, 2013, 10:31 a.m. UTC | #3
On 6/24/2013 3:47 PM, Tony Lindgren wrote:
> * Sekhar Nori <nsekhar@ti.com> [130621 03:21]:
>> On 6/21/2013 2:36 AM, Joel A Fernandes wrote:
>>> From: Matt Porter <mporter@ti.com>
>>>
>>> Enable TI EDMA option on OMAP and TI_PRIV_EDMA
>>>
>>> Signed-off-by: Matt Porter <mporter@ti.com>
>>> Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
>>
>> This will have to be taken by Tony.
> 
> Sekhar, please go ahead and take this one. I'll reply
> to the header email of this series how it should be
> queued.
> 
> For the mach-omap2/Kconfig change:
> 
> Acked-by: Tony Lindgren <tony@atomide.com>

Thanks Tony. Added to v3.11/soc-2 branch with your and Arnd's acks included.

Vinod, it will be nice to get your ack too for the drivers/dma/Kconfig
change.

Regards,
Sekhar

>  
>>> ---
>>>  arch/arm/mach-omap2/Kconfig |    1 +
>>>  drivers/dma/Kconfig         |    2 +-
>>>  2 files changed, 2 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
>>> index f49cd51..f91b07f 100644
>>> --- a/arch/arm/mach-omap2/Kconfig
>>> +++ b/arch/arm/mach-omap2/Kconfig
>>> @@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS
>>>  	select PROC_DEVICETREE if PROC_FS
>>>  	select SOC_BUS
>>>  	select SPARSE_IRQ
>>> +	select TI_PRIV_EDMA
>>>  	select USE_OF
>>>  	help
>>>  	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
>>> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
>>> index e992489..3215a3c 100644
>>> --- a/drivers/dma/Kconfig
>>> +++ b/drivers/dma/Kconfig
>>> @@ -213,7 +213,7 @@ config SIRF_DMA
>>>  
>>>  config TI_EDMA
>>>  	tristate "TI EDMA support"
>>> -	depends on ARCH_DAVINCI
>>> +	depends on ARCH_DAVINCI || ARCH_OMAP
>>>  	select DMA_ENGINE
>>>  	select DMA_VIRTUAL_CHANNELS
>>>  	default n
>>>
> 
>
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index f49cd51..f91b07f 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -17,6 +17,7 @@  config ARCH_OMAP2PLUS
 	select PROC_DEVICETREE if PROC_FS
 	select SOC_BUS
 	select SPARSE_IRQ
+	select TI_PRIV_EDMA
 	select USE_OF
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index e992489..3215a3c 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -213,7 +213,7 @@  config SIRF_DMA
 
 config TI_EDMA
 	tristate "TI EDMA support"
-	depends on ARCH_DAVINCI
+	depends on ARCH_DAVINCI || ARCH_OMAP
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	default n