From patchwork Fri Aug 14 18:51:25 2009 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sergei Shtylyov X-Patchwork-Id: 41481 Received: from arroyo.ext.ti.com (arroyo.ext.ti.com [192.94.94.40]) by demeter.kernel.org (8.14.2/8.14.2) with ESMTP id n7EIqRFK014278 for ; Fri, 14 Aug 2009 18:52:28 GMT Received: from dlep34.itg.ti.com ([157.170.170.115]) by arroyo.ext.ti.com (8.13.7/8.13.7) with ESMTP id n7EIoN8q030318; Fri, 14 Aug 2009 13:50:29 -0500 Received: from linux.omap.com (localhost [127.0.0.1]) by dlep34.itg.ti.com (8.13.7/8.13.7) with ESMTP id n7EIoNa5026958; Fri, 14 Aug 2009 13:50:23 -0500 (CDT) Received: from linux.omap.com (localhost [127.0.0.1]) by linux.omap.com (Postfix) with ESMTP id 02BF580627; Fri, 14 Aug 2009 13:50:23 -0500 (CDT) X-Original-To: davinci-linux-open-source@linux.davincidsp.com Delivered-To: davinci-linux-open-source@linux.davincidsp.com Received: from dflp53.itg.ti.com (dflp53.itg.ti.com [128.247.5.6]) by linux.omap.com (Postfix) with ESMTP id 37EEE80626 for ; Fri, 14 Aug 2009 13:50:21 -0500 (CDT) Received: from medina.ext.ti.com (localhost [127.0.0.1]) by dflp53.itg.ti.com (8.13.8/8.13.8) with ESMTP id n7EIoKdD001106 for ; Fri, 14 Aug 2009 13:50:20 -0500 (CDT) Received: from mail37-va3-R.bigfish.com (mail-va3.bigfish.com [216.32.180.111]) by medina.ext.ti.com (8.13.7/8.13.7) with ESMTP id n7EIoFfj021370 for ; Fri, 14 Aug 2009 13:50:20 -0500 Received: from mail37-va3 (localhost.localdomain [127.0.0.1]) by mail37-va3-R.bigfish.com (Postfix) with ESMTP id 746DB32845F for ; Fri, 14 Aug 2009 18:50:15 +0000 (UTC) X-SpamScore: 2 X-BigFish: vps2(z39eehcb8k3ea6iz18c1J655Nc8k19c2kzz1202hzzz2dh6bh64h) X-Spam-TCS-SCL: 3:0 X-MS-Exchange-Organization-Antispam-Report: OrigIP: 63.81.120.155; Service: EHS Received: by mail37-va3 (MessageSwitch) id 1250275810461372_19506; Fri, 14 Aug 2009 18:50:10 +0000 (UCT) Received: from imap.sh.mvista.com (unknown [63.81.120.155]) by mail37-va3.bigfish.com (Postfix) with ESMTP id EAC75A38058 for ; Fri, 14 Aug 2009 18:50:09 +0000 (UTC) Received: from wasted.dev.rtsoft.ru (unknown [10.150.0.9]) by imap.sh.mvista.com (Postfix) with ESMTP id 908E93EC9; Fri, 14 Aug 2009 11:50:07 -0700 (PDT) From: Sergei Shtylyov Organization: MontaVista Software Inc. To: linux-usb@vger.kernel.org Date: Fri, 14 Aug 2009 22:51:25 +0400 User-Agent: KMail/1.5 MIME-Version: 1.0 Content-Disposition: inline Message-Id: <200908142251.25181.sshtylyov@ru.mvista.com> Cc: davinci-linux-open-source@linux.davincidsp.com Subject: [PATCH RFC 2/2] MUSB: DA8xx/OMAP-L1x glue layer (take 2) X-BeenThere: davinci-linux-open-source@linux.davincidsp.com X-Mailman-Version: 2.1.4 Precedence: list List-Id: davinci-linux-open-source.linux.davincidsp.com List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: davinci-linux-open-source-bounces@linux.davincidsp.com Errors-To: davinci-linux-open-source-bounces@linux.davincidsp.com Texas Instruments DA8xx/OMAP-L1x glue layer for the MUSBMHRDC driver. Signed-off-by: Sergei Shtylyov Signed-off-by: Yadviga Grigorieva --- This patch (as well as the previous one) is against the recent DaVinci tree. Changes since the previos take: - s/da830/da8xx/ everywhere since DA850/OMAP-L138 is also supported; - moved CFGCHIPn #define's to and dropped DA830_ prefix; - replaced #include with #include ... arch/arm/mach-davinci/include/mach/da8xx.h | 6 arch/arm/mach-davinci/include/mach/usb.h | 37 ++ drivers/usb/musb/Kconfig | 5 drivers/usb/musb/Makefile | 6 drivers/usb/musb/da8xx.c | 522 +++++++++++++++++++++++++++++ drivers/usb/musb/musb_core.h | 1 6 files changed, 575 insertions(+), 2 deletions(-) Index: linux-davinci/arch/arm/mach-davinci/include/mach/da8xx.h =================================================================== --- linux-davinci.orig/arch/arm/mach-davinci/include/mach/da8xx.h +++ linux-davinci/arch/arm/mach-davinci/include/mach/da8xx.h @@ -59,6 +59,12 @@ #define PINMUX18 0x48 #define PINMUX19 0x4c +#define CFGCHIP0 0x17c +#define CFGCHIP1 0x180 +#define CFGCHIP2 0x184 +#define CFGCHIP3 0x188 +#define CFGCHIP4 0x18c + void __init da830_init(void); void __init da850_init(void); Index: linux-davinci/arch/arm/mach-davinci/include/mach/usb.h =================================================================== --- /dev/null +++ linux-davinci/arch/arm/mach-davinci/include/mach/usb.h @@ -0,0 +1,37 @@ +/* + * USB related definitions + * + * Copyright (C) 2009 MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_USB_H +#define __ASM_ARCH_USB_H + +/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */ +#define CFGCHIP2_PHYCLKGD (1 << 17) +#define CFGCHIP2_VBUSSENSE (1 << 16) +#define CFGCHIP2_RESET (1 << 15) +#define CFGCHIP2_OTGMODE (3 << 13) +#define CFGCHIP2_NO_OVERRIDE (0 << 13) +#define CFGCHIP2_FORCE_HOST (1 << 13) +#define CFGCHIP2_FORCE_DEVICE (2 << 13) +#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13) +#define CFGCHIP2_USB1PHYCLKMUX (1 << 12) +#define CFGCHIP2_USB2PHYCLKMUX (1 << 11) +#define CFGCHIP2_PHYPWRDN (1 << 10) +#define CFGCHIP2_OTGPWRDN (1 << 9) +#define CFGCHIP2_DATPOL (1 << 8) +#define CFGCHIP2_USB1SUSPENDM (1 << 7) +#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */ +#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */ +#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */ +#define CFGCHIP2_REFFREQ (0xf << 0) +#define CFGCHIP2_REFFREQ_12MHZ (1 << 0) +#define CFGCHIP2_REFFREQ_24MHZ (2 << 0) +#define CFGCHIP2_REFFREQ_48MHZ (3 << 0) + +#endif /* ifndef __ASM_ARCH_USB_H */ Index: linux-davinci/drivers/usb/musb/Kconfig =================================================================== --- linux-davinci.orig/drivers/usb/musb/Kconfig +++ linux-davinci/drivers/usb/musb/Kconfig @@ -42,7 +42,10 @@ config USB_MUSB_SOC default y if (BF52x && !BF522 && !BF523) comment "DaVinci 35x and 644x USB support" - depends on USB_MUSB_HDRC && ARCH_DAVINCI + depends on USB_MUSB_HDRC && ARCH_DAVINCI_DMx + +comment "DA8xx/OMAP-L1x USB support" + depends on USB_MUSB_HDRC && ARCH_DAVINCI_DA8XX comment "OMAP 243x high speed USB support" depends on USB_MUSB_HDRC && ARCH_OMAP2430 Index: linux-davinci/drivers/usb/musb/Makefile =================================================================== --- linux-davinci.orig/drivers/usb/musb/Makefile +++ linux-davinci/drivers/usb/musb/Makefile @@ -6,10 +6,14 @@ musb_hdrc-objs := musb_core.o obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o -ifeq ($(CONFIG_ARCH_DAVINCI),y) +ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y) musb_hdrc-objs += davinci.o endif +ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y) + musb_hdrc-objs += da8xx.o +endif + ifeq ($(CONFIG_USB_TUSB6010),y) musb_hdrc-objs += tusb6010.o endif Index: linux-davinci/drivers/usb/musb/da8xx.c =================================================================== --- /dev/null +++ linux-davinci/drivers/usb/musb/da8xx.c @@ -0,0 +1,522 @@ +/* + * Texas Instruments DA8XX/OMAP-L137 "glue layer" + * + * Copyright (c) 2008-2009 MontaVista Software, Inc. + * + * Based on the DaVinci "glue layer" code. + * Copyright (C) 2005-2006 by Texas Instruments + * + * This file is part of the Inventra Controller Driver for Linux. + * + * The Inventra Controller Driver for Linux is free software; you + * can redistribute it and/or modify it under the terms of the GNU + * General Public License version 2 as published by the Free Software + * Foundation. + * + * The Inventra Controller Driver for Linux is distributed in + * the hope that it will be useful, but WITHOUT ANY WARRANTY; + * without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public + * License for more details. + * + * You should have received a copy of the GNU General Public License + * along with The Inventra Controller Driver for Linux ; if not, + * write to the Free Software Foundation, Inc., 59 Temple Place, + * Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include + +#include +#include +#include + +#include "musb_core.h" +#include "cppi41_dma.h" + +/* + * DA8XX specific definitions + */ + +#define DA8XX_TX_EP_MASK 0x1f /* EP0 + 4 Tx EPs */ +#define DA8XX_RX_EP_MASK 0x1e /* 4 Rx EPs */ + +#define DA8XX_TX_INTR_MASK (DA8XX_TX_EP_MASK << USB_INTR_TX_SHIFT) +#define DA8XX_RX_INTR_MASK (DA8XX_RX_EP_MASK << USB_INTR_RX_SHIFT) + +#define A_WAIT_BCON_TIMEOUT 1100 /* in ms */ + +#define DA8XX_CFGCHIP2 IO_ADDRESS(DA8XX_BOOT_CFG_BASE + CFGCHIP2) + +#ifdef CONFIG_USB_TI_CPPI41_DMA + +/* + * CPPI 4.1 resources used for USB OTG controller module: + * + * USB DMA DMA QMgr Tx Src + * Tx Rx QNum Port + * --------------------------------- + * EP0 0 0 0 16,17 1 + * --------------------------------- + * EP1 1 1 0 18,19 2 + * --------------------------------- + * EP2 2 2 0 20,21 3 + * --------------------------------- + * EP3 3 3 0 22,23 4 + * --------------------------------- + */ + +static const u16 tx_comp_q[] = { 24, 25 }; +static const u16 rx_comp_q[] = { 26, 27 }; + +const struct usb_cppi41_info usb_cppi41_info = { + .dma_block = 0, + .ep_dma_ch = { 0, 1, 2, 3 }, + .q_mgr = 0, + .num_tx_comp_q = 2, + .num_rx_comp_q = 2, + .tx_comp_q = tx_comp_q, + .rx_comp_q = rx_comp_q +}; + +#endif /* CONFIG_USB_TI_CPPI41_DMA */ + +/* + * REVISIT (PM): we should be able to keep the PHY in low power mode most + * of the time (24 MHz oscillator and PLL off, etc.) by setting POWER.D0 + * and, when in host mode, autosuspending idle root ports... PHY_PLLON + * (overriding SUSPENDM?) then likely needs to stay off. + */ + +static inline void phy_on(void) +{ + u32 cfgchip2; + + /* + * Start the on-chip PHY and its PLL. + */ + cfgchip2 = __raw_readl(DA8XX_CFGCHIP2); + cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN); + cfgchip2 |= CFGCHIP2_PHY_PLLON; + __raw_writel(cfgchip2, DA8XX_CFGCHIP2); + + pr_info("Waiting for USB PHY clock good...\n"); + while (!(__raw_readl(DA8XX_CFGCHIP2) & CFGCHIP2_PHYCLKGD)) + cpu_relax(); +} + +static inline void phy_off(void) +{ + u32 cfgchip2; + + /* + * Power down the on-chip PHY. + */ + cfgchip2 = __raw_readl(DA8XX_CFGCHIP2); + cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN; + __raw_writel(cfgchip2, DA8XX_CFGCHIP2); +} + +/* + * Because we don't set CTRL.UINT, it's "important" to: + * - not read/write INTRUSB/INTRUSBE (except during + * initial setup, as a workaround); + * - use INTSET/INTCLR instead. + */ + +/** + * musb_platform_enable - enable interrupts + */ +void musb_platform_enable(struct musb *musb) +{ + void __iomem *reg_base = musb->ctrl_base; + u32 mask; + + /* Workaround: setup IRQs through both register sets. */ + mask = ((musb->epmask & DA8XX_TX_EP_MASK) << USB_INTR_TX_SHIFT) | + ((musb->epmask & DA8XX_RX_EP_MASK) << USB_INTR_RX_SHIFT) | + USB_INTR_USB_MASK; + musb_writel(reg_base, USB_INTR_MASK_SET_REG, mask); + + /* Force the DRVVBUS IRQ so we can start polling for ID change. */ + if (is_otg_enabled(musb)) + musb_writel(reg_base, USB_INTR_SRC_SET_REG, + USB_INTR_DRVVBUS << USB_INTR_USB_SHIFT); +} + +/** + * musb_platform_disable - disable HDRC and flush interrupts + */ +void musb_platform_disable(struct musb *musb) +{ + void __iomem *reg_base = musb->ctrl_base; + + musb_writel(reg_base, USB_INTR_MASK_CLEAR_REG, USB_INTR_USB_MASK | + DA8XX_TX_INTR_MASK | DA8XX_RX_INTR_MASK); + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + musb_writel(reg_base, USB_END_OF_INTR_REG, 0); +} + +#ifdef CONFIG_USB_MUSB_HDRC_HCD +#define portstate(stmt) stmt +#else +#define portstate(stmt) +#endif + +static void da8xx_set_vbus(struct musb *musb, int is_on) +{ + WARN_ON(is_on && is_peripheral_active(musb)); +} + +#define POLL_SECONDS 2 + +static struct timer_list otg_workaround; + +static void otg_timer(unsigned long _musb) +{ + struct musb *musb = (void *)_musb; + void __iomem *mregs = musb->mregs; + u8 devctl; + unsigned long flags; + + /* + * We poll because DaVinci's won't expose several OTG-critical + * status change events (from the transceiver) otherwise. + */ + devctl = musb_readb(mregs, MUSB_DEVCTL); + DBG(7, "Poll devctl %02x (%s)\n", devctl, otg_state_string(musb)); + + spin_lock_irqsave(&musb->lock, flags); + switch (musb->xceiv->state) { + case OTG_STATE_A_WAIT_BCON: + devctl &= ~MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + if (devctl & MUSB_DEVCTL_BDEVICE) { + musb->xceiv->state = OTG_STATE_B_IDLE; + MUSB_DEV_MODE(musb); + } else { + musb->xceiv->state = OTG_STATE_A_IDLE; + MUSB_HST_MODE(musb); + } + break; + case OTG_STATE_A_WAIT_VFALL: + /* + * Wait till VBUS falls below SessionEnd (~0.2 V); the 1.3 + * RTL seems to mis-handle session "start" otherwise (or in + * our case "recover"), in routine "VBUS was valid by the time + * VBUSERR got reported during enumeration" cases. + */ + if (devctl & MUSB_DEVCTL_VBUS) { + mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); + break; + } + musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + musb_writel(musb->ctrl_base, USB_INTR_SRC_SET_REG, + MUSB_INTR_VBUSERROR << USB_INTR_USB_SHIFT); + break; + case OTG_STATE_B_IDLE: + if (!is_peripheral_enabled(musb)) + break; + + /* + * There's no ID-changed IRQ, so we have no good way to tell + * when to switch to the A-Default state machine (by setting + * the DEVCTL.Session bit). + * + * Workaround: whenever we're in B_IDLE, try setting the + * session flag every few seconds. If it works, ID was + * grounded and we're now in the A-Default state machine. + * + * NOTE: setting the session flag is _supposed_ to trigger + * SRP but clearly it doesn't. + */ + musb_writeb(mregs, MUSB_DEVCTL, devctl | MUSB_DEVCTL_SESSION); + devctl = musb_readb(mregs, MUSB_DEVCTL); + if (devctl & MUSB_DEVCTL_BDEVICE) + mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); + else + musb->xceiv->state = OTG_STATE_A_IDLE; + break; + default: + break; + } + spin_unlock_irqrestore(&musb->lock, flags); +} + +void musb_platform_try_idle(struct musb *musb, unsigned long timeout) +{ + static unsigned long last_timer; + + if (!is_otg_enabled(musb)) + return; + + if (timeout == 0) + timeout = jiffies + msecs_to_jiffies(3); + + /* Never idle if active, or when VBUS timeout is not set as host */ + if (musb->is_active || (musb->a_wait_bcon == 0 && + musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { + DBG(4, "%s active, deleting timer\n", otg_state_string(musb)); + del_timer(&otg_workaround); + last_timer = jiffies; + return; + } + + if (time_after(last_timer, timeout) && timer_pending(&otg_workaround)) { + DBG(4, "Longer idle timer already pending, ignoring...\n"); + return; + } + last_timer = timeout; + + DBG(4, "%s inactive, starting idle timer for %u ms\n", + otg_state_string(musb), jiffies_to_msecs(timeout - jiffies)); + mod_timer(&otg_workaround, timeout); +} + +static irqreturn_t da8xx_interrupt(int irq, void *hci) +{ + struct musb *musb = hci; + void __iomem *reg_base = musb->ctrl_base; + unsigned long flags; + irqreturn_t ret = IRQ_NONE; + u32 status, pend0 = 0; + + spin_lock_irqsave(&musb->lock, flags); + + /* + * NOTE: DA8XX shadows the Mentor IRQs. Don't manage them through + * the Mentor registers (except for setup), use the TI ones and EOI. + */ + + /* + * CPPI 4.1 interrupts share the same IRQ and the EOI register but + * don't get reflected in the interrupt source/mask registers. + */ + if (is_cppi41_enabled()) { + /* + * Check for the interrupts from Tx/Rx completion queues; they + * are level-triggered and will stay asserted until the queues + * are emptied. We're using the queue pending register 0 as a + * substitute for the interrupt status register and reading it + * directly for speed. + */ + pend0 = musb_readl(reg_base, 0x4000 + + QMGR_QUEUE_PENDING_REG(0)); + if (pend0 & (0xf << 24)) { /* queues 24 to 27 */ + u32 tx = (pend0 >> 24) & 0x3; + u32 rx = (pend0 >> 26) & 0x3; + + DBG(4, "CPPI 4.1 IRQ: Tx %x, Rx %x\n", tx, rx); + cppi41_completion(musb, rx, tx); + ret = IRQ_HANDLED; + } + } + + /* Acknowledge and handle non-CPPI interrupts */ + status = musb_readl(reg_base, USB_INTR_SRC_MASKED_REG); + if (!status) + goto eoi; + + musb_writel(reg_base, USB_INTR_SRC_CLEAR_REG, status); + DBG(4, "USB IRQ %08x\n", status); + + musb->int_rx = (status & DA8XX_RX_INTR_MASK) >> USB_INTR_RX_SHIFT; + musb->int_tx = (status & DA8XX_TX_INTR_MASK) >> USB_INTR_TX_SHIFT; + musb->int_usb = (status & USB_INTR_USB_MASK) >> USB_INTR_USB_SHIFT; + + /* + * DRVVBUS IRQs are the only proxy we have (a very poor one!) for + * DA8XX's missing ID change IRQ. We need an ID change IRQ to + * switch appropriately between halves of the OTG state machine. + * Managing DEVCTL.Session per Mentor docs requires that we know its + * value but DEVCTL.BDevice is invalid without DEVCTL.Session set. + * Also, DRVVBUS pulses for SRP (but not at 5 V)... + */ + if (status & (USB_INTR_DRVVBUS << USB_INTR_USB_SHIFT)) { + int drvvbus = musb_readl(reg_base, USB_STAT_REG); + void __iomem *mregs = musb->mregs; + u8 devctl = musb_readb(mregs, MUSB_DEVCTL); + int err; + + err = is_host_enabled(musb) && (musb->int_usb & + MUSB_INTR_VBUSERROR); + if (err) { + /* + * The Mentor core doesn't debounce VBUS as needed + * to cope with device connect current spikes. This + * means it's not uncommon for bus-powered devices + * to get VBUS errors during enumeration. + * + * This is a workaround, but newer RTL from Mentor + * seems to allow a better one: "re"-starting sessions + * without waiting for VBUS to stop registering in + * devctl. + */ + musb->int_usb &= ~MUSB_INTR_VBUSERROR; + musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; + mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); + WARNING("VBUS error workaround (delay coming)\n"); + } else if (is_host_enabled(musb) && drvvbus) { + musb->is_active = 1; + MUSB_HST_MODE(musb); + musb->xceiv->default_a = 1; + musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + portstate(musb->port1_status |= USB_PORT_STAT_POWER); + del_timer(&otg_workaround); + } else { + musb->is_active = 0; + MUSB_DEV_MODE(musb); + musb->xceiv->default_a = 0; + musb->xceiv->state = OTG_STATE_B_IDLE; + portstate(musb->port1_status &= ~USB_PORT_STAT_POWER); + } + + DBG(2, "VBUS %s (%s)%s, devctl %02x\n", + drvvbus ? "on" : "off", + otg_state_string(musb), + err ? " ERROR" : "", + devctl); + ret = IRQ_HANDLED; + } + + if (musb->int_tx || musb->int_rx || musb->int_usb) + ret |= musb_interrupt(musb); + + eoi: + /* EOI needs to be written for the IRQ to be re-asserted. */ + if (ret == IRQ_HANDLED || status) + musb_writel(reg_base, USB_END_OF_INTR_REG, 0); + + /* Poll for ID change */ + if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE) + mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); + + spin_unlock_irqrestore(&musb->lock, flags); + + if (ret != IRQ_HANDLED) { + if (status) + /* + * We sometimes get unhandled IRQs in the peripheral + * mode from EP0 and SOF... + */ + ERR("Unhandled USB IRQ %08x\n", status); + else if (printk_ratelimit()) + /* + * We've seen series of spurious interrupts in the + * peripheral mode after USB reset and then after some + * time a real interrupt storm starting... + */ + ERR("Spurious IRQ, CPPI 4.1 status %08x\n" , pend0); + } + return ret; +} + +int musb_platform_set_mode(struct musb *musb, u8 musb_mode) +{ + u32 cfgchip2 = __raw_readl(DA8XX_CFGCHIP2); + + cfgchip2 &= ~CFGCHIP2_OTGMODE; + switch (musb_mode) { +#ifdef CONFIG_USB_MUSB_HDRC_HCD + case MUSB_HOST: /* Force VBUS valid, ID = 0 */ + cfgchip2 |= CFGCHIP2_FORCE_HOST; + break; +#endif +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */ + cfgchip2 |= CFGCHIP2_FORCE_DEVICE; + break; +#endif +#ifdef CONFIG_USB_MUSB_OTG + case MUSB_OTG: /* Don't override the VBUS/ID comparators */ + cfgchip2 |= CFGCHIP2_NO_OVERRIDE; + break; +#endif + default: + DBG(2, "Trying to set unsupported mode %u\n", musb_mode); + } + + __raw_writel(cfgchip2, DA8XX_CFGCHIP2); + return 0; +} + +int __init musb_platform_init(struct musb *musb) +{ + void __iomem *reg_base = musb->ctrl_base; + u32 rev; + + musb->mregs += USB_MENTOR_CORE_OFFSET; + + musb->clock = clk_get(NULL, "USB20CLK"); + if (IS_ERR(musb->clock)) + return PTR_ERR(musb->clock); + + if (clk_enable(musb->clock) < 0) + return -ENODEV; + + /* Returns zero if e.g. not clocked */ + rev = musb_readl(reg_base, USB_REVISION_REG); + if (!rev) + return -ENODEV; + + if (is_host_enabled(musb)) + setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); + + musb->board_set_vbus = da8xx_set_vbus; + + /* Reset the controller */ + musb_writel(reg_base, USB_CTRL_REG, USB_SOFT_RESET_MASK); + + /* Start the on-chip PHY and its PLL. */ + phy_on(); + + msleep(5); + + /* NOTE: IRQs are in mixed mode, not bypass to pure MUSB */ + pr_debug("DA8xx OTG revision %08x, PHY %03x, control %02x\n", + rev, __raw_readl(DA8XX_CFGCHIP2), + musb_readb(reg_base, USB_CTRL_REG)); + + musb->a_wait_bcon = A_WAIT_BCON_TIMEOUT; + musb->isr = da8xx_interrupt; + return 0; +} + +int musb_platform_exit(struct musb *musb) +{ + if (is_host_enabled(musb)) + del_timer_sync(&otg_workaround); + + /* Delay to avoid problems with module reload... */ + if (is_host_enabled(musb) && musb->xceiv->default_a) { + u8 devctl, warn = 0; + int delay; + + /* + * If there's no peripheral connected, VBUS can take a + * long time to fall... + */ + for (delay = 30; delay > 0; delay--) { + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + if (!(devctl & MUSB_DEVCTL_VBUS)) + goto done; + if ((devctl & MUSB_DEVCTL_VBUS) != warn) { + warn = devctl & MUSB_DEVCTL_VBUS; + DBG(1, "VBUS %d\n", + warn >> MUSB_DEVCTL_VBUS_SHIFT); + } + msleep(1000); + } + + /* In OTG mode, another host might be connected... */ + DBG(1, "VBUS off timeout (devctl %02x)\n", devctl); + } +done: + phy_off(); + return 0; +} Index: linux-davinci/drivers/usb/musb/musb_core.h =================================================================== --- linux-davinci.orig/drivers/usb/musb/musb_core.h +++ linux-davinci/drivers/usb/musb/musb_core.h @@ -547,6 +547,7 @@ extern void musb_hnp_stop(struct musb *m extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode); #if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \ + defined(CONFIG_ARCH_DAVINCI_DA8XX) || \ defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout); #else