@@ -1,13 +1,15 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 22 12:19:19 2009
+# Linux kernel version: 2.6.35-rc3
+# Tue Jul 20 08:30:23 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -20,6 +22,7 @@ CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -32,8 +35,16 @@ CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
@@ -48,6 +59,7 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -55,11 +67,6 @@ CONFIG_RCU_FANOUT=32
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
@@ -69,6 +76,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -90,10 +98,14 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
@@ -131,14 +143,41 @@ CONFIG_LBDAF=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -149,8 +188,11 @@ CONFIG_MMU=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
@@ -159,7 +201,6 @@ CONFIG_MMU=y
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -167,6 +208,7 @@ CONFIG_MMU=y
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
@@ -175,20 +217,27 @@ CONFIG_MMU=y
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
CONFIG_ARCH_DAVINCI=y
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
+# CONFIG_PLAT_SPEAR is not set
CONFIG_CP_INTC=y
#
@@ -205,18 +254,18 @@ CONFIG_ARCH_DAVINCI_DA830=y
CONFIG_ARCH_DAVINCI_DA850=y
CONFIG_ARCH_DAVINCI_DA8XX=y
# CONFIG_ARCH_DAVINCI_DM365 is not set
+# CONFIG_ARCH_DAVINCI_TNETV107X is not set
#
# DaVinci Board Type
#
CONFIG_MACH_DAVINCI_DA830_EVM=y
-CONFIG_DA830_UI=y
CONFIG_DA830_UI_LCD=y
# CONFIG_DA830_UI_NAND is not set
CONFIG_MACH_DAVINCI_DA850_EVM=y
-CONFIG_DA850_UI_EXP=y
CONFIG_DA850_UI_NONE=y
# CONFIG_DA850_UI_RMII is not set
+CONFIG_MACH_MITYOMAPL138=y
CONFIG_DAVINCI_MUX=y
# CONFIG_DAVINCI_MUX_DEBUG is not set
# CONFIG_DAVINCI_MUX_WARNINGS is not set
@@ -270,6 +319,7 @@ CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@@ -280,13 +330,11 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
@@ -354,7 +402,6 @@ CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -404,6 +451,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -440,6 +488,7 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
@@ -465,10 +514,21 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
#
# Device Drivers
@@ -486,12 +546,110 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_DAVINCI=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
@@ -501,9 +659,12 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -519,6 +680,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=m
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
@@ -583,6 +745,7 @@ CONFIG_LXT_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -608,8 +771,7 @@ CONFIG_TI_DAVINCI_EMAC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -631,6 +793,7 @@ CONFIG_NET_POLL_CONTROLLER=y
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -652,6 +815,7 @@ CONFIG_KEYBOARD_ATKBD=m
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
@@ -665,6 +829,8 @@ CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
@@ -680,6 +846,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_INPUT_MISC is not set
#
@@ -689,6 +856,7 @@ CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -701,6 +869,7 @@ CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
#
# Serial drivers
@@ -716,6 +885,9 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=3
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -726,6 +898,7 @@ CONFIG_HW_RANDOM=m
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
@@ -743,7 +916,9 @@ CONFIG_I2C_DAVINCI=y
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -754,18 +929,10 @@ CONFIG_I2C_DAVINCI=y
#
# Other I2C/SMBus bus drivers
#
-# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -780,13 +947,17 @@ CONFIG_GPIOLIB=y
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCF857X=y
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -799,6 +970,10 @@ CONFIG_GPIO_PCF857X=y
#
# AC97 GPIO expanders:
#
+
+#
+# MODULbus GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -811,42 +986,50 @@ CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_DAVINCI_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
+CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TC35892 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_ABX500_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
+CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_MEDIA_SUPPORT is not set
@@ -950,10 +1133,6 @@ CONFIG_RTC_LIB=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -1033,6 +1212,22 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1062,6 +1257,7 @@ CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1184,6 +1380,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1205,6 +1402,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -1213,6 +1411,7 @@ CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
#
# Security options
@@ -1220,7 +1419,11 @@ CONFIG_DEBUG_ERRORS=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
@@ -1323,9 +1526,11 @@ CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
@@ -143,6 +143,11 @@ struct tag_memclk {
__u32 fmemclk;
};
+/** MityDSP-L138 peripheral configuration info,
+ * see arch/arm/mach-davinci/include/mach/cb-mityomapl138.h
+ */
+#define ATAG_PERIPHERALS 0x42000101
+
struct tag {
struct tag_header hdr;
union {
@@ -178,6 +178,13 @@ config DA850_UI_RMII
endchoice
+config MACH_MITYOMAPL138
+ bool "Critical Link MityOMAPL138 SoM"
+ depends on ARCH_DAVINCI_DA850
+ select GPIO_PCA953X
+ help
+ Say Y here to select the Critical Link MityOMAP-L138 System on Module.
+
config MACH_TNETV107X
bool "TI TNETV107X Reference Platform"
default ARCH_DAVINCI_TNETV107X
@@ -32,6 +32,7 @@ obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o cdce949.o
obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o
obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o
obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o
+obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o
obj-$(CONFIG_MACH_TNETV107X) += board-tnetv107x-evm.o
# Power Management
new file mode 100644
@@ -0,0 +1,793 @@
+/*
+ * Critical Link MityOMAP-L138 SoM
+ *
+ * Copyright (C) 2010 Critical Link Incorporated - http://www.criticallink.com
+ *
+ * Derived from board-da850-evm.c
+ * Original Copyrights follow:
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from: arch/arm/mach-davinci/board-da830-evm.c
+ * Original Copyrights follow:
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+#include <mach/nand.h>
+#include <mach/mux.h>
+#include <mach/cb-mityomapl138.h>
+#include <mach/spi.h>
+#include <mach/irqs.h>
+
+static struct tag_peripherals peripheral_config = {
+ .Version = PERIPHERALS_VERSION,
+ .Manufacturer = "Critical Link",
+ .ENETConfig.EnetConfig = ENET_CONFIG_MII,
+ .ENETConfig.MACAddr = { 0x00, 0x50, 0xC2, 0x49, 0xDF, 0xFF },
+ .UARTConfig[0] = {
+ .Enable = 0,
+ .IsConsole = 0,
+ .Baud = 115200,
+ },
+ .UARTConfig[1] = {
+ .Enable = 1,
+ .IsConsole = 1,
+ .Baud = 115200,
+ },
+ .UARTConfig[2] = {
+ .Enable = 0,
+ .IsConsole = 0,
+ .Baud = 115200,
+ },
+ .SPIConfig[0] = {
+ .Enable = 0,
+ .CLKOut = 0,
+ .CSEnable = { 0, 0, 0, 0, 0, 0, 0, 0},
+ .ENAEnable = 0,
+ .CLKRate = 0,
+ },
+ .SPIConfig[1] = {
+ .Enable = 1,
+ .CLKOut = 1,
+ .CSEnable = { 1, 0, 0, 0, 0, 0, 0, 0},
+ .ENAEnable = 0,
+ .CLKRate = 30000000,
+ },
+ .LCDConfig = {
+ .Enable = 0,
+ .PanelName = "",
+ }
+};
+
+
+#define MITYOMAPL138_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
+
+#define MSTPRI2_LCD_MASK 0x70000000
+#define MSTPRI2_LCD_SHIFT 28
+
+#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
+#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
+
+/* MityDSP-L138 includes a 256 MByte large-page NAND flash
+ * (128K blocks).
+ */
+struct mtd_partition mityomapl138_nandflash_partition[] = {
+ {
+ .name = "rootfs",
+ .offset = 0,
+ .size = SZ_128M,
+ .mask_flags = 0, /* MTD_WRITEABLE, */
+ },
+ {
+ .name = "homefs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ },
+};
+
+static struct davinci_nand_pdata mityomapl138_nandflash_data = {
+ .parts = mityomapl138_nandflash_partition,
+ .nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
+ .ecc_mode = NAND_ECC_HW,
+ .options = NAND_USE_FLASH_BBT | NAND_BUSWIDTH_16,
+ .ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
+};
+
+static struct resource mityomapl138_nandflash_resource[] = {
+ {
+ .start = DA8XX_AEMIF_CS3_BASE,
+ .end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = DA8XX_AEMIF_CTL_BASE,
+ .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device mityomapl138_nandflash_device = {
+ .name = "davinci_nand",
+ .id = 0,
+ .dev = {
+ .platform_data = &mityomapl138_nandflash_data,
+ },
+ .num_resources = ARRAY_SIZE(mityomapl138_nandflash_resource),
+ .resource = mityomapl138_nandflash_resource,
+};
+
+static struct platform_device *mityomapl138_devices[] __initdata = {
+ &mityomapl138_nandflash_device,
+};
+
+static __init void mityomapl138_setup_nand(void)
+{
+
+ platform_add_devices(mityomapl138_devices,
+ ARRAY_SIZE(mityomapl138_devices));
+}
+
+static int mityomapl138_mmc_get_ro(int index)
+{
+ return gpio_get_value(DA850_MMCSD_WP_PIN);
+}
+
+static int mityomapl138_mmc_get_cd(int index)
+{
+ return !gpio_get_value(DA850_MMCSD_CD_PIN);
+}
+
+static struct davinci_mmc_config da850_mmc_config = {
+ .get_ro = mityomapl138_mmc_get_ro,
+ .get_cd = mityomapl138_mmc_get_cd,
+ .wires = 4,
+ .max_freq = 50000000,
+ .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+ .version = MMC_CTLR_VERSION_2,
+};
+
+static __init void mityomapl138_setup_mmc(void)
+{
+ int ret;
+
+ ret = davinci_cfg_reg_list(da850_mmcsd0_pins);
+ if (ret)
+ pr_warning("mmcsd0 mux setup failed: %d\n" ,ret);
+
+ ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
+ if (ret)
+ pr_warning("can not open GPIO %d\n", DA850_MMCSD_CD_PIN);
+ gpio_direction_input(DA850_MMCSD_CD_PIN);
+
+ ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
+ if (ret)
+ pr_warning("can not open GPIO %d\n", DA850_MMCSD_WP_PIN);
+ gpio_direction_input(DA850_MMCSD_WP_PIN);
+
+ ret = da8xx_register_mmcsd0(&da850_mmc_config);
+ if (ret)
+ pr_warning("mmcsd0 registration failed: %d\n", ret);
+}
+
+
+static struct davinci_uart_config mityomapl138_uart_config __initdata = {
+ .enabled_uarts = 0x7,
+};
+
+static int __init mityomapl138_config_emac(void)
+{
+ void __iomem *cfg_chip3_base;
+ int ret;
+ u32 val;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ u8 rmii_en = 0;
+
+ switch (peripheral_config.ENETConfig.EnetConfig) {
+ case ENET_CONFIG_RMII:
+ soc_info->emac_pdata->rmii_en = 1;
+ rmii_en = 1;
+ break;
+ case ENET_CONFIG_MII:
+ soc_info->emac_pdata->rmii_en = 0;
+ rmii_en = 0;
+ break;
+ case ENET_CONFIG_NONE:
+ default:
+ pr_info("No Ethernet PHY Selected, EMAC disabled\n");
+ return 0; /* no enet... */
+ break;
+ }
+ memcpy(&soc_info->emac_pdata->mac_addr[0],
+ &peripheral_config.ENETConfig.MACAddr[0], 6);
+
+ cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
+
+ val = __raw_readl(cfg_chip3_base);
+
+ if (rmii_en) {
+ val |= BIT(8);
+ ret = davinci_cfg_reg_list(da850_rmii_pins);
+ pr_info("RMII PHY configured, MII PHY will not be functional\n");
+ } else {
+ val &= ~BIT(8);
+ ret = davinci_cfg_reg_list(da850_cpgmac_pins);
+ pr_info("MII PHY configured, RMII PHY will not be functional\n");
+ }
+
+ if (ret)
+ pr_warning("cpgmac/rmii mux setup failed: %d\n", ret);
+
+ /* configure the CFGCHIP3 register for RMII or MII */
+ __raw_writel(val, cfg_chip3_base);
+
+ soc_info->emac_pdata->phy_mask = peripheral_config.ENETConfig.PHYMask ?
+ peripheral_config.ENETConfig.PHYMask : 1;
+ pr_info("setting phy_mask to %x\n", soc_info->emac_pdata->phy_mask);
+ soc_info->emac_pdata->mdio_max_freq = MITYOMAPL138_MDIO_FREQUENCY;
+
+ ret = da8xx_register_emac();
+ if (ret)
+ pr_warning("emac registration failed: %d\n", ret);
+
+ return 0;
+}
+device_initcall(mityomapl138_config_emac);
+
+static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
+ .bus_freq = 100, /* kHz */
+ .bus_delay = 0, /* usec */
+};
+
+/* TPS65023 voltage regulator support */
+
+/* 1.2V Core */
+struct regulator_consumer_supply tps65023_dcdc1_consumers[] = {
+ {
+ .supply = "cvdd",
+ },
+};
+
+/* 1.8V */
+struct regulator_consumer_supply tps65023_dcdc2_consumers[] = {
+ {
+ .supply = "usb0_vdda18",
+ },
+ {
+ .supply = "usb1_vdda18",
+ },
+ {
+ .supply = "ddr_dvdd18",
+ },
+ {
+ .supply = "sata_vddr",
+ },
+};
+
+/* 1.2V */
+struct regulator_consumer_supply tps65023_dcdc3_consumers[] = {
+ {
+ .supply = "sata_vdd",
+ },
+ {
+ .supply = "usb_cvdd",
+ },
+ {
+ .supply = "pll0_vdda",
+ },
+ {
+ .supply = "pll1_vdda",
+ },
+};
+
+/* 1.8V Aux LDO */
+struct regulator_consumer_supply tps65023_ldo1_consumers[] = {
+ {
+ .supply = "1.8v_aux",
+ },
+};
+
+/* VCC Aux (1.8 or 3.3) LDO */
+struct regulator_consumer_supply tps65023_ldo2_consumers[] = {
+ {
+ .supply = "vccaux",
+ },
+};
+
+
+struct regulator_init_data tps65023_regulator_data[] = {
+ /* dcdc1 */
+ {
+ .constraints = {
+ .min_uV = 1150000,
+ .max_uV = 1350000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc1_consumers),
+ .consumer_supplies = tps65023_dcdc1_consumers,
+ },
+
+ /* dcdc2 */
+ {
+ .constraints = {
+ .min_uV = 1710000,
+ .max_uV = 1910000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc2_consumers),
+ .consumer_supplies = tps65023_dcdc2_consumers,
+ },
+
+ /* dcdc3 */
+ {
+ .constraints = {
+ .min_uV = 1120000,
+ .max_uV = 1320000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc3_consumers),
+ .consumer_supplies = tps65023_dcdc3_consumers,
+ },
+
+ /* ldo1 */
+ {
+ .constraints = {
+ .min_uV = 1710000,
+ .max_uV = 1890000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo1_consumers),
+ .consumer_supplies = tps65023_ldo1_consumers,
+ },
+
+ /* ldo2 */
+ {
+ .constraints = {
+ .min_uV = 3140000,
+ .max_uV = 3420000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo2_consumers),
+ .consumer_supplies = tps65023_ldo2_consumers,
+ },
+};
+
+
+static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
+ {
+ I2C_BOARD_INFO("tps65023", 0x48),
+ .platform_data = &tps65023_regulator_data[0],
+ },
+ {
+ I2C_BOARD_INFO("24c02", 0x50),
+ },
+};
+
+static int __init pmic_tps65023_init(void)
+{
+ return i2c_register_board_info(1, mityomap_tps65023_info,
+ ARRAY_SIZE(mityomap_tps65023_info));
+}
+
+static struct davinci_spi_platform_data mityomap_spi1_pdata = {
+ .version = SPI_VERSION_2,
+ .num_chipselect = 1,
+ .wdelay = 0,
+ .odd_parity = 0,
+ .parity_enable = 0,
+ .wait_enable = 0,
+ .timer_disable = 0,
+ .clk_internal = 1,
+ .cs_hold = 1,
+ .intr_level = 0,
+ .poll_mode = 1,
+ .use_dma = 0,
+ .c2tdelay = 8,
+ .t2cdelay = 8,
+};
+
+static struct resource mityomap_spi1_resources[] = {
+ [0] = {
+ .start = 0x01F0E000,
+ .end = 0x01F0EFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_DA8XX_SPINT1,
+ .start = IRQ_DA8XX_SPINT1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = EDMA_CTLR_CHAN(0, 18),
+ .end = EDMA_CTLR_CHAN(0, 18),
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = EDMA_CTLR_CHAN(0, 19),
+ .end = EDMA_CTLR_CHAN(0, 19),
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .start = 1,
+ .end = 1,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device mityomap_spi1_device = {
+ .name = "spi_davinci",
+ .id = 1,
+ .dev = {
+ .platform_data = &mityomap_spi1_pdata,
+ },
+ .num_resources = ARRAY_SIZE(mityomap_spi1_resources),
+ .resource = mityomap_spi1_resources,
+};
+
+/*****************************************************************************
+ * SPI Devices:
+ * SPI1_CS0: 8M Flash ST-M25P64-VME6G
+ ****************************************************************************/
+static struct mtd_partition spi_flash_partitions[] = {
+ [0] = {
+ .name = "UBL",
+ .offset = 0,
+ .size = SZ_64K,
+ .mask_flags = MTD_WRITEABLE
+ },
+ [1] = {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_512K,
+ .mask_flags = 0,
+ },
+ [2] = {
+ .name = "Spare",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ },
+};
+
+static struct flash_platform_data mityomap_spi_flash_data = {
+ .name = "m25p80",
+ .parts = spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(spi_flash_partitions),
+ .type = "m25p64",
+};
+
+static struct spi_board_info mityomap_spi_flash_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &mityomap_spi_flash_data,
+ .mode = SPI_MODE_0,
+ .max_speed_hz = 30000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ },
+};
+
+void __init mityomap_init_spi1(unsigned chipselect_mask,
+ struct spi_board_info *info, unsigned len)
+{
+ int ret;
+ ret = platform_device_register(&mityomap_spi1_device);
+ if (ret)
+ pr_warning("failed to register spi device : %d\n", ret);
+
+ ret = spi_register_board_info(info, len);
+ if (ret)
+ pr_warning("failed to register board info : %d\n", ret);
+}
+
+/* davinci da850 evm audio machine driver */
+static u8 da850_iis_serializer_direction[] = {
+ INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
+ INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
+ INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
+ INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
+};
+
+static struct snd_platform_data mityomapl138_snd_data = {
+ .tx_dma_offset = 0x2000,
+ .rx_dma_offset = 0x2000,
+ .op_mode = DAVINCI_MCASP_IIS_MODE,
+ .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction),
+ .tdm_slots = 0,
+ .serial_dir = da850_iis_serializer_direction,
+ .eventq_no = EVENTQ_1,
+ .version = MCASP_VERSION_2,
+ .txnumevt = 0,
+ .rxnumevt = 0,
+};
+
+short mityomapl138_mcasp_pins[24] __initdata = {
+ DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
+ DA850_AHCLKR, DA850_ACLKR, DA850_AFSR,
+ DA850_AMUTE,
+ -1, -1, -1, -1,
+ -1, -1, -1, -1,
+ -1, -1, -1, -1,
+ -1, -1, -1, -1,
+ -1
+};
+
+static __init int mityomapl138_setup_mcasp(void)
+{
+ int ret;
+
+ mityomapl138_mcasp_pins[7+0] = DA850_AXR_13;
+ da850_iis_serializer_direction[12] = TX_MODE;
+
+ ret = davinci_cfg_reg_list(mityomapl138_mcasp_pins);
+ if (ret)
+ pr_warning("mcasp mux setup failed: %d\n", ret);
+
+ mityomapl138_snd_data.tdm_slots = 2;
+ mityomapl138_snd_data.txnumevt = 1;
+
+ da8xx_register_mcasp(0, &mityomapl138_snd_data);
+
+ return ret;
+}
+
+static const struct display_panel disp_panel = {
+ QVGA,
+ 16,
+ 16,
+ COLOR_ACTIVE,
+};
+
+static struct lcd_ctrl_config lcd_cfg = {
+ &disp_panel,
+ .ac_bias = 255,
+ .ac_bias_intrpt = 0,
+ .dma_burst_sz = 16,
+ .bpp = 16,
+ .fdd = 255,
+ .tft_alt_mode = 0,
+ .stn_565_mode = 0,
+ .mono_8bit_mode = 0,
+ .invert_line_clock = 0,
+ .invert_frm_clock = 0,
+ .sync_edge = 0,
+ .sync_ctrl = 1,
+ .raster_order = 0,
+};
+
+static struct da8xx_lcdc_platform_data sharp_lq035q7dh06_pdata = {
+ .manu_name = "sharp",
+ .controller_data = &lcd_cfg,
+ .type = "Sharp_LQ035Q7DH06",
+};
+
+static struct da8xx_lcdc_platform_data chimei_p0430wqlb_pdata = {
+ .manu_name = "ChiMei",
+ .controller_data = &lcd_cfg,
+ .type = "ChiMei_P0430WQLB",
+};
+
+static struct da8xx_lcdc_platform_data vga_640x480_pdata = {
+ .manu_name = "VGA",
+ .controller_data = &lcd_cfg,
+ .type = "vga_640x480",
+};
+
+static struct resource da8xx_lcdc_resources[] = {
+ [0] = { /* registers */
+ .start = DA8XX_LCD_CNTRL_BASE,
+ .end = DA8XX_LCD_CNTRL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* interrupt */
+ .start = IRQ_DA8XX_LCDINT,
+ .end = IRQ_DA8XX_LCDINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device da8xx_lcdc_device = {
+ .name = "da8xx_lcdc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(da8xx_lcdc_resources),
+ .resource = da8xx_lcdc_resources,
+ .dev = {
+ .platform_data = &sharp_lq035q7dh06_pdata,
+ }
+};
+
+static __init void mityomapl138_setup_lcd(void)
+{
+ int ret;
+
+ if (peripheral_config.LCDConfig.Enable) {
+ u32 prio;
+
+ /* set peripheral master priority up to 1 */
+ prio = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_MSTPRI2_REG));
+ prio &= ~MSTPRI2_LCD_MASK;
+ prio |= 1<<MSTPRI2_LCD_SHIFT;
+ __raw_writel(prio, DA8XX_SYSCFG0_VIRT(DA8XX_MSTPRI2_REG));
+
+ if (0 == strncmp("Sharp_LQ035Q7DH06",
+ peripheral_config.LCDConfig.PanelName,
+ sizeof(peripheral_config.
+ LCDConfig.PanelName))) {
+ da8xx_lcdc_device.dev.platform_data =
+ &sharp_lq035q7dh06_pdata;
+ } else if (0 == strncmp("ChiMei_P0430WQLB",
+ peripheral_config.LCDConfig.PanelName,
+ sizeof(peripheral_config.LCDConfig.PanelName))) {
+ da8xx_lcdc_device.dev.platform_data =
+ &chimei_p0430wqlb_pdata;
+ } else if (0 == strncmp("vga_640x480",
+ peripheral_config.LCDConfig.PanelName,
+ sizeof(peripheral_config.
+ LCDConfig.PanelName))) {
+ da8xx_lcdc_device.dev.platform_data =
+ &vga_640x480_pdata;
+ } else {
+ pr_warning("unknown LCD type : %s\n",
+ peripheral_config.LCDConfig.PanelName);
+ return;
+ }
+
+ ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
+ if (ret) {
+ pr_warning("lcd pinmux failed : %d\n", ret);
+ return;
+ }
+
+ ret = platform_device_register(&da8xx_lcdc_device);
+ } else {
+ pr_warning("no LCD device enabled\n");
+ }
+}
+
+static __init void mityomapl138_init(void)
+{
+ int ret;
+
+ ret = pmic_tps65023_init();
+ if (ret)
+ pr_warning("TPS65023 PMIC init failed: %d\n", ret);
+
+ ret = da8xx_register_edma();
+ if (ret)
+ pr_warning("edma registration failed: %d\n", ret);
+
+ ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
+ if (ret)
+ pr_warning("i2c0 registration failed: %d\n", ret);
+
+ ret = da8xx_register_watchdog();
+ if (ret)
+ pr_warning("watchdog registration failed: %d\n", ret);
+
+ davinci_serial_init(&mityomapl138_uart_config);
+
+ ret = da8xx_register_rtc();
+ if (ret)
+ pr_warning("rtc setup failed: %d\n", ret);
+
+ ret = da850_register_cpufreq();
+ if (ret)
+ pr_warning("cpufreq registration failed: %d\n", ret);
+
+ ret = da8xx_register_cpuidle();
+ if (ret)
+ pr_warning("cpuidle registration failed: %d\n", ret);
+
+ mityomapl138_setup_nand();
+
+ mityomap_init_spi1(1, mityomap_spi_flash_info,
+ ARRAY_SIZE(mityomap_spi_flash_info));
+
+ mityomapl138_setup_lcd();
+
+ mityomapl138_setup_mmc();
+
+ mityomapl138_setup_mcasp();
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init mityomapl138_console_init(void)
+{
+ return add_preferred_console("ttyS", 1, "115200");
+}
+console_initcall(mityomapl138_console_init);
+#endif
+
+static void __init mityomapl138_map_io(void)
+{
+ da850_init();
+}
+
+static int __init parse_tag_peripherals(const struct tag *tag)
+{
+ struct tag_peripherals *ptag;
+ int i, j;
+
+ ptag = (struct tag_peripherals *)&tag->u.cmdline.cmdline[0];
+ memcpy(&peripheral_config, ptag, sizeof(peripheral_config));
+ pr_info("Peripheral Config Block Found\n");
+ pr_info("Enet_Config = %d\n", peripheral_config.ENETConfig.EnetConfig);
+ pr_info("EMAC = %pM\n", peripheral_config.ENETConfig.MACAddr);
+ pr_info("PHYMask = 0x%x\n", peripheral_config.ENETConfig.PHYMask);
+ if (peripheral_config.LCDConfig.Enable)
+ pr_info("LCD Configured : %s\n",
+ peripheral_config.LCDConfig.PanelName);
+ else
+ pr_info("No LCD Configured\n");
+
+ for (i = 0; i < 3; i++) {
+ pr_info("UART[%d] = %d, %d, %d, %d\n", i,
+ peripheral_config.UARTConfig[i].Enable,
+ peripheral_config.UARTConfig[i].IsConsole,
+ peripheral_config.UARTConfig[i].EnableHWFlowCtrl,
+ peripheral_config.UARTConfig[i].Baud);
+ }
+ for (i = 0; i < 2; i++) {
+ int mask = 0;
+ for (j = 0; j < 8; j++)
+ mask |= ((peripheral_config.SPIConfig[i].CSEnable[j]) ?
+ (1<<j) : 0);
+
+ pr_info("SPI[%d] = %d, %d, %02X, %d, %d\n", i,
+ peripheral_config.SPIConfig[i].Enable,
+ peripheral_config.SPIConfig[i].CLKOut,
+ mask,
+ peripheral_config.SPIConfig[i].ENAEnable,
+ peripheral_config.SPIConfig[i].CLKRate);
+ }
+ return 0;
+}
+__tagtable(ATAG_PERIPHERALS, parse_tag_peripherals);
+
+
+MACHINE_START(MITYOMAPL138, "MityDSP-L138")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .map_io = mityomapl138_map_io,
+ .init_irq = cp_intc_init,
+ .timer = &davinci_timer,
+ .init_machine = mityomapl138_init,
+MACHINE_END
new file mode 100644
@@ -0,0 +1,125 @@
+/**
+ * Factory / Peripheral Configuration Data as provided by ATAG_PERIPHERAL
+ * for the MityDSP-L138 SOMs. (mityomapl138 machines)
+ *
+ * Copyright (C) 2010 Critical Link LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef CONFIG_BLOCK_H_
+#define CONFIG_BLOCK_H_
+
+#define CONFIG_MAGIC_WORD 0x00BD0138
+#define CONFIG_VERSION 0x00010000
+
+#define ENET_CONFIG_NONE 1
+#define ENET_CONFIG_MII 2
+#define ENET_CONFIG_RMII 3
+
+#define CONFIG_I2C_MAGIC_WORD 0x012C0138
+#define CONFIG_I2C_VERSION 0x00010001
+
+/**
+ * Peripherals Version History
+ * 1.00 Baseline
+ * 1.01 Added McASP Configuration
+ * 1.02 Added ethernet phy mask
+ */
+#define PERIPHERALS_VERSION 0x00010002
+
+#ifndef CONFIG_MITYDSP_ENV_SIZE
+#define CONFIG_MITYDSP_ENV_SIZE (64 << 10)
+#endif
+
+#define FPGATYPE_NONE 0
+#define FPGATYPE_XC6SLX9 1
+#define FPGATYPE_XC6SLX16 2
+#define FPGATYPE_XC6SLX25 3
+#define FPGATYPE_XC6SLX45 4
+#define FPGATYPE_UNKNOWN 10000
+
+struct I2CFactoryConfig {
+ u32 ConfigMagicWord; /** CONFIG_I2C_MAGIC_WORD */
+ u32 ConfigVersion; /** CONFIG_I2C_VERSION */
+ u8 MACADDR[6]; /** mac address assigned to part */
+ u32 FpgaType; /** fpga installed, see above */
+ u32 Spare; /** Not Used */
+ u32 SerialNumber; /** serial number of part */
+ char PartNumber[32]; /** board part number */
+};
+
+struct UARTConfig {
+ u8 Enable; /** enable Tx/Rx */
+ u8 IsConsole; /** cfg as the console */
+ u8 EnableHWFlowCtrl; /** cfg CTS/RTS */
+ u32 Baud; /** default baud rate */
+};
+
+struct SPIConfig {
+ u8 Enable; /** cfg dev+CLK, SIMO, SOMI pins */
+ u8 CLKOut; /** drive the CLK */
+ u8 CSEnable[8]; /** cfg the associated CS as output */
+ u8 ENAEnable; /** cfg the ENA pin for SPI function */
+ u32 CLKRate; /** default clock rate */
+ u8 Spare[8];
+};
+
+struct LCDConfig {
+ u8 Enable;
+ u8 PanelName[32];
+};
+
+struct ENETConfig {
+ u32 EnetConfig;
+ u8 MACAddr[6];
+ u32 PHYMask;
+ u8 Spare[8];
+};
+
+#define MCASP_PINMODE_INACTIVE 0
+#define MCASP_PINMODE_TX 1
+#define MCASP_PINMODE_RX 2
+
+struct MCASPConfig {
+ u8 Enable;
+ u8 Mode;
+ u8 PinMode[16];
+};
+/**
+ * struct tag_peripherals is passed in via kernel ATAG_PERIPHERALS
+ */
+struct tag_peripherals {
+ u32 Version; /** == PERIPHERALS_VERSION */
+ u8 Manufacturer[64]; /** null terminated string indicating manufacturer */
+ struct ENETConfig ENETConfig; /** Enable on-board ethernet */
+ struct UARTConfig UARTConfig[3]; /** default UART 0,1,2 Configuration */
+ struct SPIConfig SPIConfig[2];
+ struct LCDConfig LCDConfig;
+ struct MCASPConfig MCASPConfig;
+};
+
+/**
+ * This structure can only be grown. You cannot make it smaller...
+ */
+struct MityDSPL138Config {
+ u32 ConfigMagicWord; /** == CONFIG_MAGIC_WORD */
+ u32 ConfigVersion; /** version of the configuration block */
+ u32 ConfigSizeBytes; /** configuration size, in bytes */
+ struct tag_peripherals Peripherals;
+};
+
+struct MityDSPL138ConfigBlock {
+ union {
+ struct MityDSPL138Config config;
+ u8 space[CONFIG_MITYDSP_ENV_SIZE-sizeof(int)];
+ } Data;
+ unsigned int CheckSum; /** summed bytes of ConfigSizeBytes */
+};
+
+extern struct MityDSPL138Config config_block;
+extern struct I2CFactoryConfig factory_config_block;
+extern int get_config_block(void);
+extern int get_factory_config_block(void);
+
+#endif
@@ -41,6 +41,7 @@ extern void __iomem *da8xx_syscfg1_base;
#define DA8XX_SYSCFG0_BASE (IO_PHYS + 0x14000)
#define DA8XX_SYSCFG0_VIRT(x) (da8xx_syscfg0_base + (x))
#define DA8XX_JTAG_ID_REG 0x18
+#define DA8XX_MSTPRI2_REG 0x118
#define DA8XX_CFGCHIP0_REG 0x17c
#define DA8XX_CFGCHIP2_REG 0x184
#define DA8XX_CFGCHIP3_REG 0x188
@@ -88,6 +88,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
/* DA8xx boards */
DEBUG_LL_DA8XX(davinci_da830_evm, 2);
DEBUG_LL_DA8XX(davinci_da850_evm, 2);
+ DEBUG_LL_DA8XX(mityomapl138, 1);
/* TNETV107x boards */
DEBUG_LL_TNETV107X(tnetv107x, 1);