b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -19,6 +19,53 @@
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
+#include <mach/mux.h>
+
+#define HAWKBOARD_PHY_ID "0:07"
+
+static short omapl138_hawk_mii_pins[] __initdata = {
+ DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
+ DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
+ DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
+ DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
+ DA850_MDIO_D,
+ -1
+};
+
+static __init void omapl138_hawk_config_emac(void)
+{
+ void __iomem *cfgchip3;
+ int ret;
+ u32 val;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ if (!machine_is_omapl138_hawkboard())
+ return;
+
+ cfgchip3 = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
+
+ val = __raw_readl(cfgchip3);
+
+ val &= ~BIT(8);
+ ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
+ if (ret)
+ pr_warning("%s: "
+ "cpgmac/mii mux setup failed: %d\n", __func__, ret);
+ return;
+
+ /* configure the CFGCHIP3 register for MII */
+ __raw_writel(val, cfgchip3);
+ pr_info("EMAC: MII PHY configured\n");
+
+ soc_info->emac_pdata->phy_id = HAWKBOARD_PHY_ID;
+
+ ret = da8xx_register_emac();
+ if (ret)
+ pr_warning("%s: "
+ "emac registration failed: %d\n", __func__, ret);
+ return;
+}
+
static struct davinci_uart_config omapl138_hawk_uart_config __initdata = {
.enabled_uarts = 0x7,
@@ -30,6 +77,8 @@ static __init void omapl138_hawk_init(void)
davinci_serial_init(&omapl138_hawk_uart_config);
+ omapl138_hawk_config_emac();
+
ret = da8xx_register_watchdog();
if (ret)
pr_warning("omapl138_hawk_init: "