ERROR: open brace '{' following function declarations go on the next line
#196: FILE: drivers/usb/musb/cppi41_dma.c:128:
+static void print_pd_list(struct usb_pkt_desc *pd_pool_head) {
ERROR: open brace '{' following function declarations go on the next line
#211: FILE: drivers/usb/musb/cppi41_dma.c:143:
+static struct usb_pkt_desc *usb_get_free_pd(struct cppi41 *cppi) {
ERROR: open brace '{' following function declarations go on the next line
#376: FILE: drivers/usb/musb/cppi41_dma.c:308:
+static int cppi41_controller_stop(struct dma_controller *controller) {
ERROR: open brace '{' following function declarations go on the next line
#524: FILE: drivers/usb/musb/cppi41_dma.c:456:
+static void cppi41_channel_release(struct dma_channel *channel) {
ERROR: open brace '{' following function declarations go on the next line
#591: FILE: drivers/usb/musb/cppi41_dma.c:523:
+static unsigned cppi41_next_tx_segment(struct cppi41_channel *tx_ch) {
ERROR: open brace '{' following function declarations go on the next line
#787: FILE: drivers/usb/musb/cppi41_dma.c:719:
+static unsigned cppi41_next_rx_segment(struct cppi41_channel *rx_ch) {
ERROR: open brace '{' following function declarations go on the next line
#959: FILE: drivers/usb/musb/cppi41_dma.c:891:
+static void usb_tx_ch_teardown(struct cppi41_channel *tx_ch) {
ERROR: open brace '{' following function declarations go on the next line
#985: FILE: drivers/usb/musb/cppi41_dma.c:917:
+static void usb_rx_ch_teardown(struct cppi41_channel *rx_ch) {
ERROR: open brace '{' following function declarations go on the next line
#1045: FILE: drivers/usb/musb/cppi41_dma.c:977:
+static int cppi41_channel_abort(struct dma_channel *channel) {
ERROR: open brace '{' following function declarations go on the next line
#1206: FILE: drivers/usb/musb/cppi41_dma.c:1138:
+void dma_controller_destroy(struct dma_controller *controller) {
ERROR: open brace '{' following function declarations go on the next line
#1215: FILE: drivers/usb/musb/cppi41_dma.c:1147:
+static void usb_process_tx_queue(struct cppi41 *cppi, unsigned index) {
ERROR: open brace '{' following function declarations go on the next line
#1264: FILE: drivers/usb/musb/cppi41_dma.c:1196:
+static void usb_process_rx_queue(struct cppi41 *cppi, unsigned index) {
ERROR: Missing Signed-off-by: line(s)
total: 14 errors, 0 warnings, 1446 lines checked
/user/a0876246/cpppi41patch.txt has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
I would like to know when and how the cppi41 related patches will be taken up for review/discussion as I do not see these patches queued up yet for merge.
Regards
swami
-----Original Message-----
From: davinci-linux-open-source-bounces@linux.davincidsp.com [mailto:davinci-linux-open-source-bounces@linux.davincidsp.com] On Behalf Of Sergei Shtylyov
Sent: Wednesday, April 15, 2009 12:16 AM
To: khilman@deeprootsystems.com
Cc: davinci-linux-open-source@linux.davincidsp.com; linux-usb@vger.kernel.org
Subject: [PATCH] MUSB: CPPI 4.1 DMA driver (take 3)
Texas Instruments CPPI 4.1 DMA support for the MUSBMHRDC driver.
The code makes use of the accelerated "generic RNDIS" DMA mode, falling back to
the transparent (packet per transfer) mode if the hardware restrictions prevent
it from using the accelerated mode.
---
The patch is against the recent DaVinci tree.
Changes since take 2:
- changed the driver dependencies to match Mark Greer's patches.
drivers/usb/musb/Kconfig | 10
drivers/usb/musb/Makefile | 8
drivers/usb/musb/cppi41_dma.c | 1230 +++++++++++++++++++++++++++++++++++++++++
drivers/usb/musb/cppi41_dma.h | 110 +++
drivers/usb/musb/musb_core.c | 4
drivers/usb/musb/musb_dma.h | 6
drivers/usb/musb/musb_gadget.c | 4
drivers/usb/musb/musb_host.c | 9
8 files changed, 1372 insertions(+), 9 deletions(-)
===================================================================
@@ -158,10 +158,18 @@ config USB_INVENTRA_DMA
config USB_TI_CPPI_DMA
bool
depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
- default ARCH_DAVINCI
+ default ARCH_DAVINCI_DMx
help
Enable DMA transfers when TI CPPI DMA is available.
+config USB_TI_CPPI41_DMA
+ bool
+ depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+ default ARCH_DAVINCI_DA830
+ select CPPI41
+ help
+ Enable DMA transfers when TI CPPI 4.1 DMA is available.
+
config USB_TUSB_OMAP_DMA
bool
depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
===================================================================
@@ -53,9 +53,13 @@ ifneq ($(CONFIG_MUSB_PIO_ONLY),y)
musb_hdrc-objs += cppi_dma.o
else
- ifeq ($(CONFIG_USB_TUSB_OMAP_DMA),y)
- musb_hdrc-objs += tusb6010_omap.o
+ ifeq ($(CONFIG_USB_TI_CPPI41_DMA),y)
+ musb_hdrc-objs += cppi41_dma.o
+ ifeq ($(CONFIG_USB_TUSB_OMAP_DMA),y)
+ musb_hdrc-objs += tusb6010_omap.o
+
+ endif
endif
endif
endif
===================================================================
@@ -0,0 +1,1230 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (c) 2008, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file implements a DMA interface using TI's CPPI 4.1 DMA.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/cppi41.h>
+
+#include "musb_core.h"
+#include "musb_dma.h"
+#include "cppi41_dma.h"
+
+/* Configuration */
+#define USB_CPPI41_DESC_SIZE_SHIFT 6
+#define USB_CPPI41_DESC_ALIGN (1 << USB_CPPI41_DESC_SIZE_SHIFT)
+#define USB_CPPI41_CH_NUM_PD 64 /* 4K bulk data at full speed */
+#define USB_CPPI41_MAX_PD (USB_CPPI41_CH_NUM_PD * USB_CPPI41_NUM_CH)
+
+#undef DEBUG_CPPI_TD
+#undef USBDRV_DEBUG
+
+#ifdef USBDRV_DEBUG
+#define dprintk(x, ...) printk(x, ## __VA_ARGS__)
+#else
+#define dprintk(x, ...)
+#endif
+
+/*
+ * Data structure definitions
+ */
+
+/*
+ * USB Packet Descriptor
+ */
+struct usb_pkt_desc;
+
+struct usb_pkt_desc {
+ /* Hardware descriptor fields from this point */
+ struct cppi41_host_pkt_desc hw_desc;
+ /* Protocol specific data */
+ dma_addr_t dma_addr;
+ struct usb_pkt_desc *next_pd_ptr;
+ u8 ch_num;
+ u8 ep_num;
+};
+
+/**
+ * struct cppi41_channel - DMA Channel Control Structure
+ *
+ * Using the same for Tx/Rx.
+ */
+struct cppi41_channel {
+ struct dma_channel channel;
+
+ struct cppi41_dma_ch_obj dma_ch_obj; /* DMA channel object */
+ struct cppi41_queue src_queue; /* Tx queue or Rx free descriptor/ */
+ /* buffer queue */
+ struct cppi41_queue_obj queue_obj; /* Tx queue object or Rx free */
+ /* descriptor/buffer queue object */
+
+ u32 tag_info; /* Tx PD Tag Information field */
+
+ /* Which direction of which endpoint? */
+ struct musb_hw_ep *end_pt;
+ u8 transmit;
+ u8 ch_num; /* Channel number of Tx/Rx 0..3 */
+
+ /* DMA mode: "transparent", RNDIS, CDC, or Generic RNDIS */
+ u8 dma_mode;
+ u8 autoreq;
+
+ /* Book keeping for the current transfer request */
+ dma_addr_t start_addr;
+ u32 length;
+ u32 curr_offset;
+ u16 pkt_size;
+ u8 transfer_mode;
+ u8 zlp_queued;
+};
+
+/**
+ * struct cppi41 - CPPI 4.1 DMA Controller Object
+ *
+ * Encapsulates all book keeping and data structures pertaining to
+ * the CPPI 1.4 DMA controller.
+ */
+struct cppi41 {
+ struct dma_controller controller;
+ struct musb *musb;
+
+ struct cppi41_channel tx_cppi_ch[USB_CPPI41_NUM_CH];
+ struct cppi41_channel rx_cppi_ch[USB_CPPI41_NUM_CH];
+
+ struct usb_pkt_desc *pd_pool_head; /* Free PD pool head */
+ dma_addr_t pd_mem_phys; /* PD memory physical address */
+ void *pd_mem; /* PD memory pointer */
+ u8 pd_mem_rgn; /* PD memory region number */
+
+ u16 teardownQNum; /* Teardown completion queue number */
+ struct cppi41_queue_obj queue_obj; /* Teardown completion queue */
+ /* object */
+ u32 pkt_info; /* Tx PD Packet Information field */
+};
+
+#ifdef DEBUG_CPPI_TD
+static void print_pd_list(struct usb_pkt_desc *pd_pool_head)
+{
+ struct usb_pkt_desc *curr_pd = pd_pool_head;
+ int cnt = 0;
+
+ while (curr_pd != NULL) {
+ if (cnt % 8 == 0)
+ dprintk("\n%02x ", cnt);
+ cnt++;
+ dprintk(" %p", curr_pd);
+ curr_pd = curr_pd->next_pd_ptr;
+ }
+ dprintk("\n");
+}
+#endif
+
+static struct usb_pkt_desc *usb_get_free_pd(struct cppi41 *cppi)
+{
+ struct usb_pkt_desc *free_pd = cppi->pd_pool_head;
+
+ if (free_pd != NULL) {
+ cppi->pd_pool_head = free_pd->next_pd_ptr;
+ free_pd->next_pd_ptr = NULL;
+ }
+ return free_pd;
+}
+
+static void usb_put_free_pd(struct cppi41 *cppi, struct usb_pkt_desc *free_pd)
+{
+ free_pd->next_pd_ptr = cppi->pd_pool_head;
+ cppi->pd_pool_head = free_pd;
+}
+
+/**
+ * cppi41_controller_start - start DMA controller
+ * @controller: the controller
+ *
+ * This function initializes the CPPI 4.1 Tx/Rx channels.
+ */
+static int __init cppi41_controller_start(struct dma_controller *controller)
+{
+ struct cppi41 *cppi;
+ struct cppi41_channel *cppi_ch;
+ void __iomem *reg_base;
+ struct usb_pkt_desc *curr_pd;
+ unsigned long pd_addr;
+ int i;
+
+ cppi = container_of(controller, struct cppi41, controller);
+
+ /*
+ * TODO: We may need to check USB_CPPI41_MAX_PD here since CPPI 4.1
+ * requires the descriptor count to be a multiple of 2 ^ 5 (i.e. 32).
+ * Similarly, the descriptor size should also be a multiple of 32.
+ */
+
+ /*
+ * Allocate free packet descriptor pool for all Tx/Rx endpoints --
+ * dma_alloc_coherent() will return a page aligned address, so our
+ * alignment requirement will be honored.
+ */
+ cppi->pd_mem = dma_alloc_coherent(cppi->musb->controller,
+ USB_CPPI41_MAX_PD *
+ USB_CPPI41_DESC_ALIGN,
+ &cppi->pd_mem_phys,
+ GFP_KERNEL | GFP_DMA);
+ if (cppi->pd_mem == NULL) {
+ DBG(1, "ERROR: packet descriptor memory allocation failed\n");
+ return 0;
+ }
+ if (cppi41_mem_rgn_alloc(usb_cppi41_info.q_mgr, cppi->pd_mem_phys,
+ USB_CPPI41_DESC_SIZE_SHIFT,
+ get_count_order(USB_CPPI41_MAX_PD),
+ &cppi->pd_mem_rgn)) {
+ DBG(1, "ERROR: queue manager memory region allocation "
+ "failed\n");
+ goto free_pds;
+ }
+
+ /* Allocate the teardown completion queue */
+ if (cppi41_queue_alloc(CPPI41_UNASSIGNED_QUEUE,
+ 0, &cppi->teardownQNum)) {
+ DBG(1, "ERROR: teardown completion queue allocation failed\n");
+ goto free_mem_rgn;
+ }
+ DBG(4, "Allocated teardown completion queue %d in queue manager 0\n",
+ cppi->teardownQNum);
+
+ if (cppi41_queue_init(&cppi->queue_obj, 0, cppi->teardownQNum)) {
+ DBG(1, "ERROR: teardown completion queue initialization "
+ "failed\n");
+ goto free_queue;
+ }
+
+ /*
+ * "Slice" PDs one-by-one from the big chunk and
+ * add them to the free pool.
+ */
+ curr_pd = (struct usb_pkt_desc *)cppi->pd_mem;
+ pd_addr = cppi->pd_mem_phys;
+ for (i = 0; i < USB_CPPI41_MAX_PD; i++) {
+ curr_pd->dma_addr = pd_addr;
+
+ usb_put_free_pd(cppi, curr_pd);
+ curr_pd = (struct usb_pkt_desc *)((char *)curr_pd +
+ USB_CPPI41_DESC_ALIGN);
+ pd_addr += USB_CPPI41_DESC_ALIGN;
+ }
+
+ /* Configure the Tx channels */
+ for (i = 0, cppi_ch = cppi->tx_cppi_ch;
+ i < ARRAY_SIZE(cppi->tx_cppi_ch); ++i, ++cppi_ch) {
+ const struct cppi41_tx_ch *tx_info;
+
+ memset(cppi_ch, 0, sizeof(struct cppi41_channel));
+ cppi_ch->transmit = 1;
+ cppi_ch->ch_num = i;
+ cppi_ch->channel.private_data = cppi;
+
+ /*
+ * Extract the CPPI 4.1 DMA Tx channel configuration and
+ * construct/store the Tx PD tag info field for later use...
+ */
+ tx_info = cppi41_dma_block[usb_cppi41_info.dma_block].tx_ch_info
+ + usb_cppi41_info.ep_dma_ch[i];
+ cppi_ch->src_queue = tx_info->tx_queue[0];
+ cppi_ch->tag_info = (tx_info->port_num <<
+ CPPI41_SRC_TAG_PORT_NUM_SHIFT) |
+ (tx_info->ch_num <<
+ CPPI41_SRC_TAG_CH_NUM_SHIFT) |
+ (tx_info->sub_ch_num <<
+ CPPI41_SRC_TAG_SUB_CH_NUM_SHIFT);
+ }
+
+ /* Configure the Rx channels */
+ for (i = 0, cppi_ch = cppi->rx_cppi_ch;
+ i < ARRAY_SIZE(cppi->rx_cppi_ch); ++i, ++cppi_ch) {
+ memset(cppi_ch, 0, sizeof(struct cppi41_channel));
+ cppi_ch->ch_num = i;
+ cppi_ch->channel.private_data = cppi;
+ }
+
+ /* Construct/store Tx PD packet info field for later use */
+ cppi->pkt_info = (CPPI41_PKT_TYPE_USB << CPPI41_PKT_TYPE_SHIFT) |
+ (CPPI41_RETURN_LINKED << CPPI41_RETURN_POLICY_SHIFT) |
+ (usb_cppi41_info.q_mgr << CPPI41_RETURN_QMGR_SHIFT) |
+ (usb_cppi41_info.tx_comp_q[0] <<
+ CPPI41_RETURN_QNUM_SHIFT);
+
+ /* Do necessary configuartion in hardware to get started */
+ reg_base = cppi->musb->ctrl_base;
+
+ /* Disable auto request mode */
+ musb_writel(reg_base, USB_AUTOREQ_REG, 0);
+
+ /* Disable the CDC/RNDIS modes */
+ musb_writel(reg_base, USB_MODE_REG, 0);
+
+ return 1;
+
+ free_queue:
+ if (cppi41_queue_free(0, cppi->teardownQNum))
+ DBG(1, "ERROR: failed to free teardown completion queue\n");
+
+ free_mem_rgn:
+ if (cppi41_mem_rgn_free(usb_cppi41_info.q_mgr, cppi->pd_mem_rgn))
+ DBG(1, "ERROR: failed to free queue manager memory region\n");
+
+ free_pds:
+ dma_free_coherent(cppi->musb->controller,
+ USB_CPPI41_MAX_PD * USB_CPPI41_DESC_ALIGN,
+ cppi->pd_mem, cppi->pd_mem_phys);
+
+ return 0;
+}
+
+/**
+ * cppi41_controller_stop - stop DMA controller
+ * @controller: the controller
+ *
+ * De-initialize the DMA Controller as necessary.
+ */
+static int cppi41_controller_stop(struct dma_controller *controller)
+{
+ struct cppi41 *cppi;
+ void __iomem *reg_base;
+
+ cppi = container_of(controller, struct cppi41, controller);
+
+ /* Free the teardown completion queue */
+ if (cppi41_queue_free(usb_cppi41_info.q_mgr, cppi->teardownQNum))
+ DBG(1, "ERROR: failed to free teardown completion queue\n");
+
+ /*
+ * Free the packet descriptor region allocated
+ * for all Tx/Rx channels.
+ */
+ if (cppi41_mem_rgn_free(usb_cppi41_info.q_mgr, cppi->pd_mem_rgn))
+ DBG(1, "ERROR: failed to free queue manager memory region\n");
+
+ dma_free_coherent(cppi->musb->controller,
+ USB_CPPI41_MAX_PD * USB_CPPI41_DESC_ALIGN,
+ cppi->pd_mem, cppi->pd_mem_phys);
+
+ reg_base = cppi->musb->ctrl_base;
+
+ /* Disable auto request mode */
+ musb_writel(reg_base, USB_AUTOREQ_REG, 0);
+
+ /* Disable the CDC/RNDIS modes */
+ musb_writel(reg_base, USB_MODE_REG, 0);
+
+ return 1;
+}
+
+/**
+ * cppi41_channel_alloc - allocate a CPPI channel for DMA.
+ * @controller: the controller
+ * @ep: the endpoint
+ * @is_tx: 1 for Tx channel, 0 for Rx channel
+ *
+ * With CPPI, channels are bound to each transfer direction of a non-control
+ * endpoint, so allocating (and deallocating) is mostly a way to notice bad
+ * housekeeping on the software side. We assume the IRQs are always active.
+ */
+static struct dma_channel *cppi41_channel_alloc(struct dma_controller
+ *controller,
+ struct musb_hw_ep *ep, u8 is_tx)
+{
+ struct cppi41 *cppi;
+ struct cppi41_channel *cppi_ch;
+ u32 ch_num, ep_num = ep->epnum;
+
+ cppi = container_of(controller, struct cppi41, controller);
+
+ /* Remember, ep_num: 1 .. Max_EP, and CPPI ch_num: 0 .. Max_EP - 1 */
+ ch_num = ep_num - 1;
+
+ if (ep_num > USB_CPPI41_NUM_CH) {
+ DBG(1, "No %cx DMA channel for EP%d\n",
+ is_tx ? 'T' : 'R', ep_num);
+ return NULL;
+ }
+
+ cppi_ch = (is_tx ? cppi->tx_cppi_ch : cppi->rx_cppi_ch) + ch_num;
+
+ /* As of now, just return the corresponding CPPI 4.1 channel handle */
+ if (is_tx) {
+ /* Initialize the CPPI 4.1 Tx DMA channel */
+ if (cppi41_tx_ch_init(&cppi_ch->dma_ch_obj,
+ usb_cppi41_info.dma_block,
+ usb_cppi41_info.ep_dma_ch[ch_num])) {
+ DBG(1, "ERROR: cppi41_tx_ch_init failed for "
+ "channel %d\n", ch_num);
+ return NULL;
+ }
+ /*
+ * Teardown descriptors will be pushed to the dedicated
+ * completion queue.
+ */
+ cppi41_dma_ch_default_queue(&cppi_ch->dma_ch_obj,
+ 0, cppi->teardownQNum);
+ } else {
+ struct cppi41_rx_ch_cfg rx_cfg;
+ u8 q_mgr = usb_cppi41_info.q_mgr;
+ int i;
+
+ /* Initialize the CPPI 4.1 Rx DMA channel */
+ if (cppi41_rx_ch_init(&cppi_ch->dma_ch_obj,
+ usb_cppi41_info.dma_block,
+ usb_cppi41_info.ep_dma_ch[ch_num])) {
+ DBG(1, "ERROR: cppi41_rx_ch_init failed\n");
+ return NULL;
+ }
+
+ if (cppi41_queue_alloc(CPPI41_FREE_DESC_BUF_QUEUE |
+ CPPI41_UNASSIGNED_QUEUE,
+ q_mgr, &cppi_ch->src_queue.q_num)) {
+ DBG(1, "ERROR: cppi41_queue_alloc failed for "
+ "free descriptor/buffer queue\n");
+ return NULL;
+ }
+ DBG(4, "Allocated free descriptor/buffer queue %d in "
+ "queue manager %d\n", cppi_ch->src_queue.q_num, q_mgr);
+
+ rx_cfg.default_desc_type = cppi41_rx_host_desc;
+ rx_cfg.sop_offset = 0;
+ rx_cfg.retry_starved = 1;
+ rx_cfg.rx_queue.q_mgr = cppi_ch->src_queue.q_mgr = q_mgr;
+ rx_cfg.rx_queue.q_num = usb_cppi41_info.rx_comp_q[0];
+ for (i = 0; i < 4; i++)
+ rx_cfg.cfg.host_pkt.fdb_queue[i] = cppi_ch->src_queue;
+ cppi41_rx_ch_configure(&cppi_ch->dma_ch_obj, &rx_cfg);
+ }
+
+ /* Initialize the CPPI 4.1 DMA source queue */
+ if (cppi41_queue_init(&cppi_ch->queue_obj, cppi_ch->src_queue.q_mgr,
+ cppi_ch->src_queue.q_num)) {
+ DBG(1, "ERROR: cppi41_queue_init failed for %s queue",
+ is_tx ? "Tx" : "Rx free descriptor/buffer");
+ if (is_tx == 0 &&
+ cppi41_queue_free(cppi_ch->src_queue.q_mgr,
+ cppi_ch->src_queue.q_num))
+ DBG(1, "ERROR: failed to free Rx descriptor/buffer "
+ "queue\n");
+ return NULL;
+ }
+
+ /* Enable the DMA channel */
+ cppi41_dma_ch_enable(&cppi_ch->dma_ch_obj);
+
+ if (cppi_ch->end_pt)
+ DBG(1, "Re-allocating DMA %cx channel %d (%p)\n",
+ is_tx ? 'T' : 'R', ch_num, cppi_ch);
+
+ cppi_ch->end_pt = ep;
+ cppi_ch->ch_num = ch_num;
+ cppi_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+ DBG(4, "Allocated DMA %cx channel %d for EP%d\n", is_tx ? 'T' : 'R',
+ ch_num, ep_num);
+
+ return &cppi_ch->channel;
+}
+
+/**
+ * cppi41_channel_release - release a CPPI DMA channel
+ * @channel: the channel
+ */
+static void cppi41_channel_release(struct dma_channel *channel)
+{
+ struct cppi41_channel *cppi_ch;
+
+ /* REVISIT: for paranoia, check state and abort if needed... */
+ cppi_ch = container_of(channel, struct cppi41_channel, channel);
+ if (cppi_ch->end_pt == NULL)
+ DBG(1, "Releasing idle DMA channel %p\n", cppi_ch);
+
+ /* But for now, not its IRQ */
+ cppi_ch->end_pt = NULL;
+ channel->status = MUSB_DMA_STATUS_UNKNOWN;
+
+ cppi41_dma_ch_disable(&cppi_ch->dma_ch_obj);
+
+ /* De-allocate Rx free descriptior/buffer queue */
+ if (cppi_ch->transmit == 0 &&
+ cppi41_queue_free(cppi_ch->src_queue.q_mgr,
+ cppi_ch->src_queue.q_num))
+ DBG(1, "ERROR: failed to free Rx descriptor/buffer queue\n");
+}
+
+static void cppi41_mode_update(struct cppi41_channel *cppi_ch, u8 mode)
+{
+ if (mode != cppi_ch->dma_mode) {
+ struct cppi41 *cppi = cppi_ch->channel.private_data;
+ void *__iomem reg_base = cppi->musb->ctrl_base;
+ u32 reg_val = musb_readl(reg_base, USB_MODE_REG);
+ u8 ep_num = cppi_ch->ch_num + 1;
+
+ if (cppi_ch->transmit) {
+ reg_val &= ~USB_TX_MODE_MASK(ep_num);
+ reg_val |= mode << USB_TX_MODE_SHIFT(ep_num);
+ } else {
+ reg_val &= ~USB_RX_MODE_MASK(ep_num);
+ reg_val |= mode << USB_RX_MODE_SHIFT(ep_num);
+ }
+ musb_writel(reg_base, USB_MODE_REG, reg_val);
+ cppi_ch->dma_mode = mode;
+ }
+}
+
+/*
+ * CPPI 4.1 Tx:
+ * ============
+ * Tx is a lot more reasonable than Rx: RNDIS mode seems to behave well except
+ * how it handles the exactly-N-packets case. It appears that there's a hiccup
+ * in that case (maybe the DMA completes before a ZLP gets written?) boiling
+ * down to not being able to rely on the XFER DMA writing any terminating zero
+ * length packet before the next transfer is started...
+ *
+ * The generic RNDIS mode does not have this misfeature, so we prefer using it
+ * instead. We then send the terminating ZLP *explictly* using DMA instead of
+ * doing it by PIO after an IRQ.
+ *
+ */
+
+/**
+ * cppi41_next_tx_segment - DMA write for the next chunk of a buffer
+ * @tx_ch: Tx channel
+ *
+ * Context: controller IRQ-locked
+ */
+static unsigned cppi41_next_tx_segment(struct cppi41_channel *tx_ch)
+{
+ struct cppi41 *cppi = tx_ch->channel.private_data;
+ struct usb_pkt_desc *curr_pd;
+ u32 length = tx_ch->length - tx_ch->curr_offset;
+ u32 pkt_size = tx_ch->pkt_size;
+ unsigned num_pds, n;
+
+ /*
+ * Tx can use the generic RNDIS mode where we can probably fit this
+ * transfer in one PD and one IRQ. The only time we would NOT want
+ * to use it is when the hardware constraints prevent it...
+ */
+ if ((pkt_size & 0x3f) == 0 && length > pkt_size) {
+ num_pds = 1;
+ pkt_size = length;
+ cppi41_mode_update(tx_ch, USB_GENERIC_RNDIS_MODE);
+ } else {
+ num_pds = (length + pkt_size - 1) / pkt_size;
+ cppi41_mode_update(tx_ch, USB_TRANSPARENT_MODE);
+ }
+
+ /*
+ * If length of transmit buffer is 0 or a multiple of the endpoint size,
+ * then send the zero length packet.
+ */
+ if (!length || (tx_ch->transfer_mode && length % pkt_size == 0))
+ num_pds++;
+
+ DBG(4, "TX DMA%u, %s, maxpkt %u, %u PDs, addr %#x, len %u\n",
+ tx_ch->ch_num, tx_ch->dma_mode ? "accelerated" : "transparent",
+ pkt_size, num_pds, tx_ch->start_addr + tx_ch->curr_offset, length);
+
+ for (n = 0; n < num_pds; n++) {
+ struct cppi41_host_pkt_desc *hw_desc;
+
+ /* Get Tx host packet descriptor from the free pool */
+ curr_pd = usb_get_free_pd(cppi);
+ if (curr_pd == NULL) {
+ DBG(1, "No Tx PDs\n");
+ break;
+ }
+
+ if (length < pkt_size)
+ pkt_size = length;
+
+ hw_desc = &curr_pd->hw_desc;
+ hw_desc->desc_info = (CPPI41_DESC_TYPE_HOST <<
+ CPPI41_DESC_TYPE_SHIFT) | pkt_size;
+ hw_desc->tag_info = tx_ch->tag_info;
+ hw_desc->pkt_info = cppi->pkt_info;
+
+ hw_desc->buf_ptr = tx_ch->start_addr + tx_ch->curr_offset;
+ hw_desc->buf_len = pkt_size;
+ hw_desc->next_desc_ptr = 0;
+
+ curr_pd->ch_num = tx_ch->ch_num;
+ curr_pd->ep_num = tx_ch->end_pt->epnum;
+
+ tx_ch->curr_offset += pkt_size;
+ length -= pkt_size;
+
+ if (pkt_size == 0)
+ tx_ch->zlp_queued = 1;
+
+ DBG(5, "TX PD %p: buf %08x, len %08x, pkt info %08x\n", curr_pd,
+ hw_desc->buf_ptr, hw_desc->buf_len, hw_desc->pkt_info);
+
+ cppi41_queue_push(&tx_ch->queue_obj, curr_pd->dma_addr,
+ USB_CPPI41_DESC_ALIGN, pkt_size);
+ }
+
+ return n;
+}
+
+static void cppi41_autoreq_update(struct cppi41_channel *rx_ch, u8 autoreq)
+{
+ struct cppi41 *cppi = rx_ch->channel.private_data;
+
+ if (is_host_active(cppi->musb) &&
+ autoreq != rx_ch->autoreq) {
+ void *__iomem reg_base = cppi->musb->ctrl_base;
+ u32 reg_val = musb_readl(reg_base, USB_AUTOREQ_REG);
+ u8 ep_num = rx_ch->ch_num + 1;
+
+ reg_val &= ~USB_RX_AUTOREQ_MASK(ep_num);
+ reg_val |= autoreq << USB_RX_AUTOREQ_SHIFT(ep_num);
+
+ musb_writel(reg_base, USB_AUTOREQ_REG, reg_val);
+ rx_ch->autoreq = autoreq;
+ }
+}
+
+static void cppi41_set_ep_size(struct cppi41_channel *rx_ch, u32 pkt_size)
+{
+ struct cppi41 *cppi = rx_ch->channel.private_data;
+ void *__iomem reg_base = cppi->musb->ctrl_base;
+ u8 ep_num = rx_ch->ch_num + 1;
+
+ musb_writel(reg_base, USB_GENERIC_RNDIS_EP_SIZE_REG(ep_num), pkt_size);
+}
+
+/*
+ * CPPI 4.1 Rx:
+ * ============
+ * Consider a 1KB bulk Rx buffer in two scenarios: (a) it's fed two 300 byte
+ * packets back-to-back, and (b) it's fed two 512 byte packets back-to-back.
+ * (Full speed transfers have similar scenarios.)
+ *
+ * The correct behavior for Linux is that (a) fills the buffer with 300 bytes,
+ * and the next packet goes into a buffer that's queued later; while (b) fills
+ * the buffer with 1024 bytes. How to do that with accelerated DMA modes?
+ *
+ * Rx queues in RNDIS mode (one single BD) handle (a) correctly but (b) loses
+ * BADLY because nothing (!) happens when that second packet fills the buffer,
+ * much less when a third one arrives -- which makes it not a "true" RNDIS mode.
+ * In the RNDIS protocol short-packet termination is optional, and it's fine if
+ * the peripherals (not hosts!) pad the messages out to end of buffer. Standard
+ * PCI host controller DMA descriptors implement that mode by default... which
+ * is no accident.
+ *
+ * Generic RNDIS mode is the only way to reliably make both cases work. This
+ * mode is identical to the "normal" RNDIS mode except for the case where the
+ * last packet of the segment matches the max USB packet size -- in this case,
+ * the packet will be closed when a value (0x10000 max) in the Generic RNDIS
+ * EP Size register is reached. This mode will work for the network drivers
+ * (CDC/RNDIS) as well as for the mass storage drivers where there is no short
+ * packet.
+ *
+ * BUT we can only use non-transparent modes when USB packet size is a multiple
+ * of 64 bytes. Let's see what happens when this is not the case...
+ *
+ * Rx queues (2 BDs with 512 bytes each) have converse problems to RNDIS mode:
+ * (b) is handled right but (a) loses badly. DMA doesn't stop after receiving
+ * a short packet and processes both of those PDs; so both packets are loaded
+ * into the buffer (with 212 byte gap between them), and the next buffer queued
+ * will NOT get its 300 bytes of data. Even in the case when there should be
+ * no short packets (URB_SHORT_NOT_OK is set), queueing several packets in the
+ * host mode doesn't win us anything since we have to manually "prod" the Rx
+ * process after each packet is received by setting ReqPkt bit in endpoint's
+ * RXCSR; in the peripheral mode without short packets, queueing could be used
+ * BUT we'll have to *teardown* the channel if a short packet still arrives in
+ * the peripheral mode, and to "collect" the left-over packet descriptors from
+ * the free descriptor/buffer queue in both cases...
+ *
+ * One BD at a time is the only way to make make both cases work reliably, with
+ * software handling both cases correctly, at the significant penalty of needing
+ * an IRQ per packet. (The lack of I/O overlap can be slightly ameliorated by
+ * enabling double buffering.)
+ *
+ * There seems to be no way to identify for sure the cases where the CDC mode
+ * is appropriate...
+ *
+ */
+
+/**
+ * cppi41_next_rx_segment - DMA read for the next chunk of a buffer
+ * @rx_ch: Rx channel
+ *
+ * Context: controller IRQ-locked
+ *
+ * NOTE: In the transparent mode, we have to queue one packet at a time since:
+ * - we must avoid starting reception of another packet after receiving
+ * a short packet;
+ * - in host mode we have to set ReqPkt bit in the endpoint's RXCSR after
+ * receiving each packet but the last one... ugly!
+ */
+static unsigned cppi41_next_rx_segment(struct cppi41_channel *rx_ch)
+{
+ struct cppi41 *cppi = rx_ch->channel.private_data;
+ struct usb_pkt_desc *curr_pd;
+ struct cppi41_host_pkt_desc *hw_desc;
+ u32 length = rx_ch->length - rx_ch->curr_offset;
+ u32 pkt_size = rx_ch->pkt_size;
+
+ /*
+ * Rx can use the generic RNDIS mode where we can probably fit this
+ * transfer in one PD and one IRQ (or two with a short packet).
+ */
+ if ((pkt_size & 0x3f) == 0 && length >= 2 * pkt_size) {
+ cppi41_mode_update(rx_ch, USB_GENERIC_RNDIS_MODE);
+ cppi41_autoreq_update(rx_ch, USB_AUTOREQ_ALL_BUT_EOP);
+
+ if (likely(length < 0x10000))
+ pkt_size = length - length % pkt_size;
+ else
+ pkt_size = 0x10000;
+ cppi41_set_ep_size(rx_ch, pkt_size);
+ } else {
+ cppi41_mode_update(rx_ch, USB_TRANSPARENT_MODE);
+ cppi41_autoreq_update(rx_ch, USB_NO_AUTOREQ);
+ }
+
+ DBG(4, "RX DMA%u, %s, maxpkt %u, addr %#x, rec'd %u/%u\n",
+ rx_ch->ch_num, rx_ch->dma_mode ? "accelerated" : "transparent",
+ pkt_size, rx_ch->start_addr + rx_ch->curr_offset,
+ rx_ch->curr_offset, rx_ch->length);
+
+ /* Get Rx packet descriptor from the free pool */
+ curr_pd = usb_get_free_pd(cppi);
+ if (curr_pd == NULL) {
+ /* Shouldn't ever happen! */
+ ERR("No Rx PDs\n");
+ return 0;
+ }
+
+ /*
+ * HCD arranged ReqPkt for the first packet.
+ * We arrange it for all but the last one.
+ */
+ if (is_host_active(cppi->musb) && rx_ch->channel.actual_len) {
+ void __iomem *epio = rx_ch->end_pt->regs;
+ u16 csr = musb_readw(epio, MUSB_RXCSR);
+
+ csr |= MUSB_RXCSR_H_REQPKT | MUSB_RXCSR_H_WZC_BITS;
+ musb_writew(epio, MUSB_RXCSR, csr);
+ }
+
+ if (length < pkt_size)
+ pkt_size = length;
+
+ hw_desc = &curr_pd->hw_desc;
+ hw_desc->orig_buf_ptr = rx_ch->start_addr + rx_ch->curr_offset;
+ hw_desc->orig_buf_len = pkt_size;
+
+ curr_pd->ch_num = rx_ch->ch_num;
+ curr_pd->ep_num = rx_ch->end_pt->epnum;
+
+ rx_ch->curr_offset += pkt_size;
+
+ /*
+ * Push the free Rx packet descriptor
+ * to the free descriptor/buffer queue.
+ */
+ cppi41_queue_push(&rx_ch->queue_obj, curr_pd->dma_addr,
+ USB_CPPI41_DESC_ALIGN, 0);
+
+ return 1;
+}
+
+/**
+ * cppi41_channel_program - program channel for data transfer
+ * @channel: the channel
+ * @maxpacket: max packet size
+ * @mode: for Rx, 1 unless the USB protocol driver promised to treat
+ * all short reads as errors and kick in high level fault recovery;
+ * for Tx, 0 unless the protocol driver _requires_ short-packet
+ * termination mode
+ * @dma_addr: DMA address of buffer
+ * @length: length of buffer
+ *
+ * Context: controller IRQ-locked
+ */
+static int cppi41_channel_program(struct dma_channel *channel, u16 maxpacket,
+ u8 mode, dma_addr_t dma_addr, u32 length)
+{
+ struct cppi41_channel *cppi_ch;
+ unsigned queued;
+
+ cppi_ch = container_of(channel, struct cppi41_channel, channel);
+
+ switch (channel->status) {
+ case MUSB_DMA_STATUS_BUS_ABORT:
+ case MUSB_DMA_STATUS_CORE_ABORT:
+ /* Fault IRQ handler should have handled cleanup */
+ WARNING("%cx DMA%d not cleaned up after abort!\n",
+ cppi_ch->transmit ? 'T' : 'R', cppi_ch->ch_num);
+ break;
+ case MUSB_DMA_STATUS_BUSY:
+ WARNING("Program active channel? %cx DMA%d\n",
+ cppi_ch->transmit ? 'T' : 'R', cppi_ch->ch_num);
+ break;
+ case MUSB_DMA_STATUS_UNKNOWN:
+ DBG(1, "%cx DMA%d not allocated!\n",
+ cppi_ch->transmit ? 'T' : 'R', cppi_ch->ch_num);
+ return 0;
+ case MUSB_DMA_STATUS_FREE:
+ break;
+ }
+
+ channel->status = MUSB_DMA_STATUS_BUSY;
+
+ /* Set the transfer parameters, then queue up the first segment */
+ cppi_ch->start_addr = dma_addr;
+ cppi_ch->curr_offset = 0;
+ cppi_ch->pkt_size = maxpacket;
+ cppi_ch->length = length;
+ cppi_ch->transfer_mode = mode;
+ cppi_ch->zlp_queued = 0;
+
+ /* Tx or Rx channel? */
+ if (cppi_ch->transmit)
+ queued = cppi41_next_tx_segment(cppi_ch);
+ else
+ queued = cppi41_next_rx_segment(cppi_ch);
+
+ return queued > 0;
+}
+
+static struct usb_pkt_desc *usb_get_pd_ptr(struct cppi41 *cppi,
+ unsigned long pd_addr)
+{
+ if (pd_addr >= cppi->pd_mem_phys && pd_addr < cppi->pd_mem_phys +
+ USB_CPPI41_MAX_PD * USB_CPPI41_DESC_ALIGN)
+ return pd_addr - cppi->pd_mem_phys + cppi->pd_mem;
+ else
+ return NULL;
+}
+
+static int usb_check_teardown(struct cppi41_channel *cppi_ch,
+ unsigned long pd_addr)
+{
+ u32 info;
+
+ if (cppi41_get_teardown_info(pd_addr, &info)) {
+ DBG(1, "ERROR: not a teardown descriptor\n");
+ return 0;
+ }
+
+ if ((info & CPPI41_TEARDOWN_TX_RX_MASK) ==
+ (!cppi_ch->transmit << CPPI41_TEARDOWN_TX_RX_SHIFT) &&
+ (info & CPPI41_TEARDOWN_DMA_NUM_MASK) ==
+ (usb_cppi41_info.dma_block << CPPI41_TEARDOWN_DMA_NUM_SHIFT) &&
+ (info & CPPI41_TEARDOWN_CHAN_NUM_MASK) ==
+ (usb_cppi41_info.ep_dma_ch[cppi_ch->ch_num] <<
+ CPPI41_TEARDOWN_CHAN_NUM_SHIFT))
+ return 1;
+
+ DBG(1, "ERROR: unexpected values in teardown descriptor\n");
+ return 0;
+}
+
+/*
+ * We can't handle the channel teardown via the default completion queue in
+ * context of the controller IRQ-locked, so we use the dedicated teardown
+ * completion queue which we can just poll for a teardown descriptor, not
+ * interfering with the Tx completion queue processing.
+ */
+static void usb_tx_ch_teardown(struct cppi41_channel *tx_ch)
+{
+ struct cppi41 *cppi = tx_ch->channel.private_data;
+ unsigned long pd_addr;
+
+ /* Initiate teardown for Tx DMA channel */
+ cppi41_dma_ch_teardown(&tx_ch->dma_ch_obj);
+
+ do {
+ /* Wait for a descriptor to be queued and pop it... */
+ do {
+ pd_addr = cppi41_queue_pop(&cppi->queue_obj);
+ } while (!pd_addr);
+
+ dprintk("Descriptor (%08lx) popped from teardown completion "
+ "queue\n", pd_addr);
+ } while (!usb_check_teardown(tx_ch, pd_addr));
+}
+
+/*
+ * For Rx DMA channels, the situation is more complex: there's only a single
+ * completion queue for all our needs, so we have to temporarily redirect the
+ * completed descriptors to our teardown completion queue, with a possibility
+ * of a completed packet landing there as well...
+ */
+static void usb_rx_ch_teardown(struct cppi41_channel *rx_ch)
+{
+ struct cppi41 *cppi = rx_ch->channel.private_data;
+
+ cppi41_dma_ch_default_queue(&rx_ch->dma_ch_obj, 0, cppi->teardownQNum);
+
+ /* Initiate teardown for Rx DMA channel */
+ cppi41_dma_ch_teardown(&rx_ch->dma_ch_obj);
+
+ while (1) {
+ struct usb_pkt_desc *curr_pd;
+ unsigned long pd_addr;
+
+ /* Wait for a descriptor to be queued and pop it... */
+ do {
+ pd_addr = cppi41_queue_pop(&cppi->queue_obj);
+ } while (!pd_addr);
+
+ dprintk("Descriptor (%08lx) popped from teardown completion "
+ "queue\n", pd_addr);
+
+ /*
+ * We might have popped a completed Rx PD, so check if the
+ * physical address is within the PD region first. If it's
+ * not the case, it must be a teardown descriptor...
+ * */
+ curr_pd = usb_get_pd_ptr(cppi, pd_addr);
+ if (curr_pd == NULL) {
+ if (usb_check_teardown(rx_ch, pd_addr))
+ break;
+ continue;
+ }
+
+ /* Paranoia: check if PD is from the right channel... */
+ if (curr_pd->ch_num != rx_ch->ch_num) {
+ ERR("Unexpected channel %d in Rx PD\n",
+ curr_pd->ch_num);
+ continue;
+ }
+
+ /* Extract the buffer length from the completed PD */
+ rx_ch->channel.actual_len += curr_pd->hw_desc.buf_len;
+
+ /*
+ * Return Rx PDs to the software list --
+ * this is protected by critical section.
+ */
+ usb_put_free_pd(cppi, curr_pd);
+ }
+
+ /* Now restore the default Rx completion queue... */
+ cppi41_dma_ch_default_queue(&rx_ch->dma_ch_obj, usb_cppi41_info.q_mgr,
+ usb_cppi41_info.rx_comp_q[0]);
+}
+
+/*
+ * cppi41_channel_abort
+ *
+ * Context: controller IRQ-locked, endpoint selected.
+ */
+static int cppi41_channel_abort(struct dma_channel *channel)
+{
+ struct cppi41 *cppi;
+ struct cppi41_channel *cppi_ch;
+ struct musb *musb;
+ void __iomem *reg_base, *epio;
+ unsigned long pd_addr;
+ u32 csr, td_reg;
+ u8 ch_num, ep_num;
+
+ cppi_ch = container_of(channel, struct cppi41_channel, channel);
+ ch_num = cppi_ch->ch_num;
+
+ switch (channel->status) {
+ case MUSB_DMA_STATUS_BUS_ABORT:
+ case MUSB_DMA_STATUS_CORE_ABORT:
+ /* From Rx or Tx fault IRQ handler */
+ case MUSB_DMA_STATUS_BUSY:
+ /* The hardware needs shutting down... */
+ dprintk("%s: DMA busy, status = %x\n",
+ __func__, channel->status);
+ break;
+ case MUSB_DMA_STATUS_UNKNOWN:
+ DBG(1, "%cx DMA%d not allocated\n",
+ cppi_ch->transmit ? 'T' : 'R', ch_num);
+ /* FALLTHROUGH */
+ case MUSB_DMA_STATUS_FREE:
+ return 0;
+ }
+
+ cppi = cppi_ch->channel.private_data;
+ musb = cppi->musb;
+ reg_base = musb->ctrl_base;
+ epio = cppi_ch->end_pt->regs;
+ ep_num = ch_num + 1;
+
+#ifdef DEBUG_CPPI_TD
+ printk("Before teardown:");
+ print_pd_list(cppi->pd_pool_head);
+#endif
+
+ if (cppi_ch->transmit) {
+ dprintk("Tx channel teardown, cppi_ch = %p\n", cppi_ch);
+
+ /* Tear down Tx DMA channel */
+ usb_tx_ch_teardown(cppi_ch);
+
+ /* Issue CPPI FIFO teardown for Tx channel */
+ td_reg = musb_readl(reg_base, USB_TEARDOWN_REG);
+ td_reg |= USB_TX_TDOWN_MASK(ep_num);
+ musb_writel(reg_base, USB_TEARDOWN_REG, td_reg);
+
+ /* Flush FIFO of the endpoint */
+ csr = musb_readw(epio, MUSB_TXCSR);
+ csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_H_WZC_BITS;
+ musb_writew(epio, MUSB_TXCSR, csr);
+ } else { /* Rx */
+ dprintk("Rx channel teardown, cppi_ch = %p\n", cppi_ch);
+
+ /* Flush FIFO of the endpoint */
+ csr = musb_readw(epio, MUSB_RXCSR);
+ csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_H_WZC_BITS;
+ musb_writew(epio, MUSB_RXCSR, csr);
+
+ /* Issue CPPI FIFO teardown for Rx channel */
+ td_reg = musb_readl(reg_base, USB_TEARDOWN_REG);
+ td_reg |= USB_RX_TDOWN_MASK(ep_num);
+ musb_writel(reg_base, USB_TEARDOWN_REG, td_reg);
+
+ /* Tear down Rx DMA channel */
+ usb_rx_ch_teardown(cppi_ch);
+
+ /*
+ * NOTE: docs don't guarantee any of this works... we expect
+ * that if the USB core stops telling the CPPI core to pull
+ * more data from it, then it'll be safe to flush current Rx
+ * DMA state iff any pending FIFO transfer is done.
+ */
+
+ /* For host, ensure ReqPkt is never set again */
+ cppi41_autoreq_update(cppi_ch, USB_NO_AUTOREQ);
+
+ /* For host, clear (just) ReqPkt at end of current packet(s) */
+ if (is_host_active(cppi->musb))
+ csr &= ~MUSB_RXCSR_H_REQPKT;
+ csr |= MUSB_RXCSR_H_WZC_BITS;
+
+ /* Clear DMA enable */
+ csr &= ~MUSB_RXCSR_DMAENAB;
+ musb_writew(epio, MUSB_RXCSR, csr);
+
+ /* Flush the FIFO of endpoint once again */
+ csr = musb_readw(epio, MUSB_RXCSR);
+ csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_H_WZC_BITS;
+ musb_writew(epio, MUSB_RXCSR, csr);
+
+ udelay(50);
+ }
+
+ /*
+ * There might be PDs in the Rx/Tx source queue that were not consumed
+ * by the DMA controller -- they need to be recycled properly.
+ */
+ while ((pd_addr = cppi41_queue_pop(&cppi_ch->queue_obj)) != 0) {
+ struct usb_pkt_desc *curr_pd;
+
+ curr_pd = usb_get_pd_ptr(cppi, pd_addr);
+ if (curr_pd == NULL) {
+ ERR("Invalid PD popped from source queue\n");
+ continue;
+ }
+
+ /*
+ * Return Rx/Tx PDs to the software list --
+ * this is protected by critical section.
+ */
+ dprintk("Returning PD %p to the free PD list\n", curr_pd);
+ usb_put_free_pd(cppi, curr_pd);
+ }
+
+#ifdef DEBUG_CPPI_TD
+ printk("After teardown:");
+ print_pd_list(cppi->pd_pool_head);
+#endif
+
+ /* Re-enable the DMA channel */
+ cppi41_dma_ch_enable(&cppi_ch->dma_ch_obj);
+
+ channel->status = MUSB_DMA_STATUS_FREE;
+
+ return 0;
+}
+
+/**
+ * dma_controller_create - instantiate an object representing DMA controller.
+ */
+struct dma_controller * __init dma_controller_create(struct musb *musb,
+ void __iomem *mregs)
+{
+ struct cppi41 *cppi;
+
+ cppi = kzalloc(sizeof *cppi, GFP_KERNEL);
+ if (!cppi)
+ return NULL;
+
+ /* Initialize the CPPI 4.1 DMA controller structure */
+ cppi->musb = musb;
+ cppi->controller.start = cppi41_controller_start;
+ cppi->controller.stop = cppi41_controller_stop;
+ cppi->controller.channel_alloc = cppi41_channel_alloc;
+ cppi->controller.channel_release = cppi41_channel_release;
+ cppi->controller.channel_program = cppi41_channel_program;
+ cppi->controller.channel_abort = cppi41_channel_abort;
+
+ return &cppi->controller;
+}
+
+/**
+ * dma_controller_destroy - destroy a previously instantiated DMA controller
+ * @controller: the controller
+ */
+void dma_controller_destroy(struct dma_controller *controller)
+{
+ struct cppi41 *cppi;
+
+ cppi = container_of(controller, struct cppi41, controller);
+
+ /* Free the CPPI object */
+ kfree(cppi);
+}
+
+static void usb_process_tx_queue(struct cppi41 *cppi, unsigned index)
+{
+ struct cppi41_queue_obj tx_queue_obj;
+ unsigned long pd_addr;
+
+ if (cppi41_queue_init(&tx_queue_obj, usb_cppi41_info.q_mgr,
+ usb_cppi41_info.tx_comp_q[index])) {
+ DBG(1, "ERROR: cppi41_queue_init failed for "
+ "Tx completion queue");
+ return;
+ }
+
+ while ((pd_addr = cppi41_queue_pop(&tx_queue_obj)) != 0) {
+ struct usb_pkt_desc *curr_pd;
+ struct cppi41_channel *tx_ch;
+ u8 ch_num, ep_num;
+ u32 length;
+
+ curr_pd = usb_get_pd_ptr(cppi, pd_addr);
+ if (curr_pd == NULL) {
+ ERR("Invalid PD popped from Tx completion queue\n");
+ continue;
+ }
+
+ /* Extract the data from received packet descriptor */
+ ch_num = curr_pd->ch_num;
+ ep_num = curr_pd->ep_num;
+ length = curr_pd->hw_desc.buf_len;
+
+ tx_ch = &cppi->tx_cppi_ch[ch_num];
+ tx_ch->channel.actual_len += length;
+
+ /*
+ * Return Tx PD to the software list --
+ * this is protected by critical section
+ */
+ usb_put_free_pd(cppi, curr_pd);
+
+ if ((tx_ch->curr_offset < tx_ch->length) ||
+ (tx_ch->transfer_mode && !tx_ch->zlp_queued))
+ cppi41_next_tx_segment(tx_ch);
+ else if (tx_ch->channel.actual_len >= tx_ch->length) {
+ tx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+ /* Tx completion routine callback */
+ musb_dma_completion(cppi->musb, ep_num, 1);
+ }
+ }
+}
+
+static void usb_process_rx_queue(struct cppi41 *cppi, unsigned index)
+{
+ struct cppi41_queue_obj rx_queue_obj;
+ unsigned long pd_addr;
+
+ if (cppi41_queue_init(&rx_queue_obj, usb_cppi41_info.q_mgr,
+ usb_cppi41_info.rx_comp_q[index])) {
+ DBG(1, "ERROR: cppi41_queue_init failed for Rx queue\n");
+ return;
+ }
+
+ while ((pd_addr = cppi41_queue_pop(&rx_queue_obj)) != 0) {
+ struct usb_pkt_desc *curr_pd;
+ struct cppi41_channel *rx_ch;
+ u8 ch_num, ep_num;
+ u32 length;
+
+ curr_pd = usb_get_pd_ptr(cppi, pd_addr);
+ if (curr_pd == NULL) {
+ ERR("Invalid PD popped from Rx completion queue\n");
+ continue;
+ }
+
+ /* Extract the data from received packet descriptor */
+ ch_num = curr_pd->ch_num;
+ ep_num = curr_pd->ep_num;
+ length = curr_pd->hw_desc.buf_len;
+
+ rx_ch = &cppi->rx_cppi_ch[ch_num];
+ rx_ch->channel.actual_len += length;
+
+ /*
+ * Return Rx PD to the software list --
+ * this is protected by critical section
+ */
+ usb_put_free_pd(cppi, curr_pd);
+
+ if (unlikely(rx_ch->channel.actual_len >= rx_ch->length ||
+ length < curr_pd->hw_desc.orig_buf_len)) {
+ rx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+ /* Rx completion routine callback */
+ musb_dma_completion(cppi->musb, ep_num, 0);
+ } else
+ cppi41_next_rx_segment(rx_ch);
+ }
+}
+
+/*
+ * cppi41_completion - handle interrupts from the Tx/Rx completion queues
+ *
+ * NOTE: since we have to manually prod the Rx process in the transparent mode,
+ * we certainly want to handle the Rx queues first.
+ */
+void cppi41_completion(struct musb *musb, u32 rx, u32 tx)
+{
+ struct cppi41 *cppi;
+ unsigned index;
+
+ cppi = container_of(musb->dma_controller, struct cppi41, controller);
+
+ /* Process packet descriptors from the Rx queues */
+ for (index = 0; rx != 0; rx >>= 1, index++)
+ if (rx & 1)
+ usb_process_rx_queue(cppi, index);
+
+ /* Process packet descriptors from the Tx completion queues */
+ for (index = 0; tx != 0; tx >>= 1, index++)
+ if (tx & 1)
+ usb_process_tx_queue(cppi, index);
+}
===================================================================
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (c) 2008, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _CPPI41_DMA_H_
+#define _CPPI41_DMA_H_
+
+/* USB 2.0 OTG module registers */
+#define USB_REVISION_REG 0x00
+#define USB_CTRL_REG 0x04
+#define USB_STAT_REG 0x08
+#define USB_EMULATION_REG 0x08
+#define USB_MODE_REG 0x10 /* Transparent, CDC, [Generic] RNDIS */
+#define USB_AUTOREQ_REG 0x14
+#define USB_SRP_FIX_TIME_REG 0x18
+#define USB_TEARDOWN_REG 0x1c
+#define USB_INTR_SRC_REG 0x20
+#define USB_INTR_SRC_SET_REG 0x24
+#define USB_INTR_SRC_CLEAR_REG 0x28
+#define USB_INTR_MASK_REG 0x2c
+#define USB_INTR_MASK_SET_REG 0x30
+#define USB_INTR_MASK_CLEAR_REG 0x34
+#define USB_INTR_SRC_MASKED_REG 0x38
+#define USB_END_OF_INTR_REG 0x3c
+#define USB_GENERIC_RNDIS_EP_SIZE_REG(n) (0x50 + (((n) - 1) << 2))
+
+/* Control register bits */
+#define USB_SOFT_RESET_MASK 1
+
+/* Mode register bits */
+#define USB_RX_MODE_SHIFT(n) (16 + (((n) - 1) << 2))
+#define USB_RX_MODE_MASK(n) (3 << USB_RX_MODE_SHIFT(n))
+#define USB_TX_MODE_SHIFT(n) ((((n) - 1) << 2))
+#define USB_TX_MODE_MASK(n) (3 << USB_TX_MODE_SHIFT(n))
+#define USB_TRANSPARENT_MODE 0
+#define USB_RNDIS_MODE 1
+#define USB_CDC_MODE 2
+#define USB_GENERIC_RNDIS_MODE 3
+
+/* AutoReq register bits */
+#define USB_RX_AUTOREQ_SHIFT(n) (((n) - 1) << 1)
+#define USB_RX_AUTOREQ_MASK(n) (3 << USB_RX_AUTOREQ_SHIFT(n))
+#define USB_NO_AUTOREQ 0
+#define USB_AUTOREQ_ALL_BUT_EOP 1
+#define USB_AUTOREQ_ALWAYS 3
+
+/* Teardown register bits */
+#define USB_TX_TDOWN_SHIFT(n) (16 + (n))
+#define USB_TX_TDOWN_MASK(n) (1 << USB_TX_TDOWN_SHIFT(n))
+#define USB_RX_TDOWN_SHIFT(n) (n)
+#define USB_RX_TDOWN_MASK(n) (1 << USB_RX_TDOWN_SHIFT(n))
+
+/* USB interrupt register bits */
+#define USB_INTR_USB_SHIFT 16
+#define USB_INTR_USB_MASK (0x1ff << USB_INTR_USB_SHIFT) /* 8 Mentor */
+ /* interrupts and DRVVBUS interrupt */
+#define USB_INTR_DRVVBUS 0x100
+#define USB_INTR_RX_SHIFT 8
+#define USB_INTR_TX_SHIFT 0
+
+#define USB_MENTOR_CORE_OFFSET 0x400
+
+#define USB_CPPI41_NUM_CH 4
+
+/**
+ * struct usb_cppi41_info - CPPI 4.1 USB implementation details
+ * @dma_block: DMA block number
+ * @ep_dma_ch: DMA channel numbers used for EPs 1 .. Max_EP
+ * @q_mgr: queue manager number
+ * @num_tx_comp_q: number of the Tx completion queues
+ * @num_rx_comp_q: number of the Rx queues
+ * @tx_comp_q: pointer to the list of the Tx completion queue numbers
+ * @rx_comp_q: pointer to the list of the Rx queue numbers
+ */
+struct usb_cppi41_info {
+ u8 dma_block;
+ u8 ep_dma_ch[USB_CPPI41_NUM_CH];
+ u8 q_mgr;
+ u8 num_tx_comp_q;
+ u8 num_rx_comp_q;
+ const u16 *tx_comp_q;
+ const u16 *rx_comp_q;
+};
+
+extern const struct usb_cppi41_info usb_cppi41_info;
+
+/**
+ * cppi41_completion - Tx/Rx completion queue interrupt handling hook
+ * @musb: the controller
+ * @rx: bitmask having bit N set if Rx queue N is not empty
+ * @tx: bitmask having bit N set if Tx completion queue N is not empty
+ */
+void cppi41_completion(struct musb *musb, u32 rx, u32 tx);
+
+#endif /* _CPPI41_DMA_H_ */
===================================================================
@@ -1597,7 +1597,7 @@ void musb_dma_completion(struct musb *mu
if (!epnum) {
#ifndef CONFIG_USB_TUSB_OMAP_DMA
- if (!is_cppi_enabled()) {
+ if (!is_cppi_enabled() && !is_cppi41_enabled()) {
/* endpoint 0 */
if (devctl & MUSB_DEVCTL_HM)
musb_h_ep0_irq(musb);
@@ -2224,6 +2224,8 @@ static int __init musb_init(void)
"pio"
#elif defined(CONFIG_USB_TI_CPPI_DMA)
"cppi-dma"
+#elif defined(CONFIG_USB_TI_CPPI41_DMA)
+ "cppi4.1-dma"
#elif defined(CONFIG_USB_INVENTRA_DMA)
"musb-dma"
#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
===================================================================
@@ -74,6 +74,12 @@ struct musb_hw_ep;
#define is_cppi_enabled() 0
#endif
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+#define is_cppi41_enabled() 1
+#else
+#define is_cppi41_enabled() 0
+#endif
+
#ifdef CONFIG_USB_TUSB_OMAP_DMA
#define tusb_dma_omap() 1
#else
===================================================================
@@ -332,7 +332,7 @@ static void txstate(struct musb *musb, s
}
}
-#elif defined(CONFIG_USB_TI_CPPI_DMA)
+#elif defined(CONFIG_USB_TI_CPPI_DMA) || defined(CONFIG_USB_TI_CPPI41_DMA)
/* program endpoint CSR first, then setup DMA */
csr &= ~(MUSB_TXCSR_AUTOSET
| MUSB_TXCSR_DMAMODE
@@ -580,7 +580,7 @@ static void rxstate(struct musb *musb, s
csr = musb_readw(epio, MUSB_RXCSR);
- if (is_cppi_enabled() && musb_ep->dma) {
+ if ((is_cppi_enabled() || is_cppi41_enabled()) && musb_ep->dma) {
struct dma_controller *c = musb->dma_controller;
struct dma_channel *channel = musb_ep->dma;
===================================================================
@@ -260,7 +260,8 @@ start:
if (!hw_ep->tx_channel)
musb_h_tx_start(hw_ep);
- else if (is_cppi_enabled() || tusb_dma_omap())
+ else if (is_cppi_enabled() || is_cppi41_enabled() ||
+ tusb_dma_omap())
cppi_host_txdma_start(hw_ep);
}
}
@@ -791,7 +792,8 @@ static void musb_ep_program(struct musb
#endif
/* candidate for DMA */
- if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
+ if ((is_cppi_enabled() || is_cppi41_enabled() ||
+ tusb_dma_omap()) && dma_channel) {
/* program endpoint CSRs first, then setup DMA.
* assume CPPI setup succeeds.
@@ -883,7 +885,8 @@ static void musb_ep_program(struct musb
/* kick things off */
- if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
+ if ((is_cppi_enabled() || is_cppi41_enabled() ||
+ tusb_dma_omap()) && dma_channel) {
/* candidate for DMA */
if (dma_channel) {
dma_channel->actual_len = 0L;