diff mbox

[01/10] spi: dw-mid: respect 8 bit mode

Message ID 1411060140-2801-2-git-send-email-andriy.shevchenko@linux.intel.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Andy Shevchenko Sept. 18, 2014, 5:08 p.m. UTC
In case of 8 bit mode and DMA usage we end up with every second byte written as
0. We have to respect bits_per_word settings what this patch actually does.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/spi/spi-dw-mid.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Mark Brown Sept. 24, 2014, 8:49 a.m. UTC | #1
On Thu, Sep 18, 2014 at 08:08:51PM +0300, Andy Shevchenko wrote:
> In case of 8 bit mode and DMA usage we end up with every second byte written as
> 0. We have to respect bits_per_word settings what this patch actually does.

Applied, thanks.
diff mbox

Patch

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index c4b9f64..f7f0ad2 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -136,7 +136,7 @@  static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
 	txconf.dst_addr = dws->dma_addr;
 	txconf.dst_maxburst = LNW_DMA_MSIZE_16;
 	txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+	txconf.dst_addr_width = dws->dma_width;
 	txconf.device_fc = false;
 
 	txchan->device->device_control(txchan, DMA_SLAVE_CONFIG,
@@ -159,7 +159,7 @@  static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
 	rxconf.src_addr = dws->dma_addr;
 	rxconf.src_maxburst = LNW_DMA_MSIZE_16;
 	rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+	rxconf.src_addr_width = dws->dma_width;
 	rxconf.device_fc = false;
 
 	rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG,