From patchwork Mon Feb 23 14:24:44 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andy Shevchenko X-Patchwork-Id: 5865671 Return-Path: X-Original-To: patchwork-dmaengine@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 74C64BF440 for ; Mon, 23 Feb 2015 14:25:00 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 6193B2064B for ; Mon, 23 Feb 2015 14:24:57 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 04BD620648 for ; Mon, 23 Feb 2015 14:24:54 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752160AbbBWOYx (ORCPT ); Mon, 23 Feb 2015 09:24:53 -0500 Received: from mga01.intel.com ([192.55.52.88]:4551 "EHLO mga01.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751055AbbBWOYu (ORCPT ); Mon, 23 Feb 2015 09:24:50 -0500 Received: from orsmga002.jf.intel.com ([10.7.209.21]) by fmsmga101.fm.intel.com with ESMTP; 23 Feb 2015 06:24:49 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.09,631,1418112000"; d="scan'208";a="689443055" Received: from smile.fi.intel.com (HELO smile) ([10.237.72.90]) by orsmga002.jf.intel.com with ESMTP; 23 Feb 2015 06:24:46 -0800 Received: from andy by smile with local (Exim 4.84) (envelope-from ) id 1YPtwD-0007qV-Er; Mon, 23 Feb 2015 16:24:45 +0200 From: Andy Shevchenko To: linux-serial@vger.kernel.org, Vinod Koul , Greg Kroah-Hartman , David Cohen , Alan Cox , dmaengine@vger.kernel.org, x86@kernel.org Cc: Andy Shevchenko Subject: [PATCH v1 3/3] x86, intel-mid: remove Intel MID specific serial support Date: Mon, 23 Feb 2015 16:24:44 +0200 Message-Id: <1424701484-30078-4-git-send-email-andriy.shevchenko@linux.intel.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1424701484-30078-1-git-send-email-andriy.shevchenko@linux.intel.com> References: <1424701484-30078-1-git-send-email-andriy.shevchenko@linux.intel.com> Sender: dmaengine-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: dmaengine@vger.kernel.org X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Since we have a native 8250 driver carrying the Intel MID serial devices the specific support is not needed anymore. This patch removes it for Intel MID. Note that the console device name is changed from ttyMFDx to ttySx. Signed-off-by: Andy Shevchenko Acked-by: Ingo Molnar --- arch/x86/Kconfig.debug | 4 - arch/x86/include/asm/intel-mid.h | 3 - arch/x86/kernel/early_printk.c | 6 - arch/x86/platform/intel-mid/Makefile | 1 - .../platform/intel-mid/early_printk_intel_mid.c | 112 -- drivers/tty/serial/Kconfig | 10 - drivers/tty/serial/Makefile | 1 - drivers/tty/serial/mfd.c | 1505 -------------------- include/linux/serial_mfd.h | 47 - include/uapi/linux/serial_reg.h | 19 - 10 files changed, 1708 deletions(-) delete mode 100644 arch/x86/platform/intel-mid/early_printk_intel_mid.c delete mode 100644 drivers/tty/serial/mfd.c delete mode 100644 include/linux/serial_mfd.h diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 20028da..72484a6 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -43,10 +43,6 @@ config EARLY_PRINTK with klogd/syslogd or the X server. You should normally N here, unless you want to debug such a crash. -config EARLY_PRINTK_INTEL_MID - bool "Early printk for Intel MID platform support" - depends on EARLY_PRINTK && X86_INTEL_MID - config EARLY_PRINTK_DBGP bool "Early printk via EHCI debug port" depends on EARLY_PRINTK && PCI diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h index 705d357..7c5af12 100644 --- a/arch/x86/include/asm/intel-mid.h +++ b/arch/x86/include/asm/intel-mid.h @@ -136,9 +136,6 @@ extern enum intel_mid_timer_options intel_mid_timer_options; #define SFI_MTMR_MAX_NUM 8 #define SFI_MRTC_MAX 8 -extern struct console early_hsu_console; -extern void hsu_early_console_init(const char *); - extern void intel_scu_devices_create(void); extern void intel_scu_devices_destroy(void); diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index a62536a..f85e3fb 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -375,12 +375,6 @@ static int __init setup_early_printk(char *buf) if (!strncmp(buf, "xen", 3)) early_console_register(&xenboot_console, keep); #endif -#ifdef CONFIG_EARLY_PRINTK_INTEL_MID - if (!strncmp(buf, "hsu", 3)) { - hsu_early_console_init(buf + 3); - early_console_register(&early_hsu_console, keep); - } -#endif #ifdef CONFIG_EARLY_PRINTK_EFI if (!strncmp(buf, "efi", 3)) early_console_register(&early_efi_console, keep); diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile index 0a8ee70..0ce1b19 100644 --- a/arch/x86/platform/intel-mid/Makefile +++ b/arch/x86/platform/intel-mid/Makefile @@ -1,5 +1,4 @@ obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfl.o -obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o # SFI specific code ifdef CONFIG_X86_INTEL_MID diff --git a/arch/x86/platform/intel-mid/early_printk_intel_mid.c b/arch/x86/platform/intel-mid/early_printk_intel_mid.c deleted file mode 100644 index 4e72082..0000000 --- a/arch/x86/platform/intel-mid/early_printk_intel_mid.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * early_printk_intel_mid.c - early consoles for Intel MID platforms - * - * Copyright (c) 2008-2010, Intel Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. - */ - -/* - * This file implements early console named hsu. - * hsu is based on a High Speed UART device which only exists in the Medfield - * platform - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -/* - * Following is the early console based on Medfield HSU (High - * Speed UART) device. - */ -#define HSU_PORT_BASE 0xffa28080 - -static void __iomem *phsu; - -void hsu_early_console_init(const char *s) -{ - unsigned long paddr, port = 0; - u8 lcr; - - /* - * Select the early HSU console port if specified by user in the - * kernel command line. - */ - if (*s && !kstrtoul(s, 10, &port)) - port = clamp_val(port, 0, 2); - - paddr = HSU_PORT_BASE + port * 0x80; - phsu = (void __iomem *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr); - - /* Disable FIFO */ - writeb(0x0, phsu + UART_FCR); - - /* Set to default 115200 bps, 8n1 */ - lcr = readb(phsu + UART_LCR); - writeb((0x80 | lcr), phsu + UART_LCR); - writeb(0x18, phsu + UART_DLL); - writeb(lcr, phsu + UART_LCR); - writel(0x3600, phsu + UART_MUL*4); - - writeb(0x8, phsu + UART_MCR); - writeb(0x7, phsu + UART_FCR); - writeb(0x3, phsu + UART_LCR); - - /* Clear IRQ status */ - readb(phsu + UART_LSR); - readb(phsu + UART_RX); - readb(phsu + UART_IIR); - readb(phsu + UART_MSR); - - /* Enable FIFO */ - writeb(0x7, phsu + UART_FCR); -} - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -static void early_hsu_putc(char ch) -{ - unsigned int timeout = 10000; /* 10ms */ - u8 status; - - while (--timeout) { - status = readb(phsu + UART_LSR); - if (status & BOTH_EMPTY) - break; - udelay(1); - } - - /* Only write the char when there was no timeout */ - if (timeout) - writeb(ch, phsu + UART_TX); -} - -static void early_hsu_write(struct console *con, const char *str, unsigned n) -{ - int i; - - for (i = 0; i < n && *str; i++) { - if (*str == '\n') - early_hsu_putc('\r'); - early_hsu_putc(*str); - str++; - } -} - -struct console early_hsu_console = { - .name = "earlyhsu", - .write = early_hsu_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index d2501f0..a5def8e 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -483,16 +483,6 @@ config SERIAL_SA1100_CONSOLE your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.) -config SERIAL_MFD_HSU - tristate "Medfield High Speed UART support" - depends on PCI - select SERIAL_CORE - -config SERIAL_MFD_HSU_CONSOLE - bool "Medfile HSU serial console support" - depends on SERIAL_MFD_HSU=y - select SERIAL_CORE_CONSOLE - config SERIAL_BFIN tristate "Blackfin serial port support" depends on BLACKFIN diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 599be4b..f42b4f9 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -78,7 +78,6 @@ obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o -obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c deleted file mode 100644 index 8fe4501..0000000 --- a/drivers/tty/serial/mfd.c +++ /dev/null @@ -1,1505 +0,0 @@ -/* - * mfd.c: driver for High Speed UART device of Intel Medfield platform - * - * Refer pxa.c, 8250.c and some other drivers in drivers/serial/ - * - * (C) Copyright 2010 Intel Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. - */ - -/* Notes: - * 1. DMA channel allocation: 0/1 channel are assigned to port 0, - * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans - * are used for RX, odd chans for TX - * - * 2. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always - * asserted, only when the HW is reset the DDCD and DDSR will - * be triggered - */ - -#if defined(CONFIG_SERIAL_MFD_HSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define HSU_DMA_BUF_SIZE 2048 - -#define chan_readl(chan, offset) readl(chan->reg + offset) -#define chan_writel(chan, offset, val) writel(val, chan->reg + offset) - -#define mfd_readl(obj, offset) readl(obj->reg + offset) -#define mfd_writel(obj, offset, val) writel(val, obj->reg + offset) - -static int hsu_dma_enable; -module_param(hsu_dma_enable, int, 0); -MODULE_PARM_DESC(hsu_dma_enable, - "It is a bitmap to set working mode, if bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode."); - -struct hsu_dma_buffer { - u8 *buf; - dma_addr_t dma_addr; - u32 dma_size; - u32 ofs; -}; - -struct hsu_dma_chan { - u32 id; - enum dma_data_direction dirt; - struct uart_hsu_port *uport; - void __iomem *reg; -}; - -struct uart_hsu_port { - struct uart_port port; - unsigned char ier; - unsigned char lcr; - unsigned char mcr; - unsigned int lsr_break_flag; - char name[12]; - int index; - struct device *dev; - - struct hsu_dma_chan *txc; - struct hsu_dma_chan *rxc; - struct hsu_dma_buffer txbuf; - struct hsu_dma_buffer rxbuf; - int use_dma; /* flag for DMA/PIO */ - int running; - int dma_tx_on; -}; - -/* Top level data structure of HSU */ -struct hsu_port { - void __iomem *reg; - unsigned long paddr; - unsigned long iolen; - u32 irq; - - struct uart_hsu_port port[3]; - struct hsu_dma_chan chans[10]; - - struct dentry *debugfs; -}; - -static inline unsigned int serial_in(struct uart_hsu_port *up, int offset) -{ - unsigned int val; - - if (offset > UART_MSR) { - offset <<= 2; - val = readl(up->port.membase + offset); - } else - val = (unsigned int)readb(up->port.membase + offset); - - return val; -} - -static inline void serial_out(struct uart_hsu_port *up, int offset, int value) -{ - if (offset > UART_MSR) { - offset <<= 2; - writel(value, up->port.membase + offset); - } else { - unsigned char val = value & 0xff; - writeb(val, up->port.membase + offset); - } -} - -#ifdef CONFIG_DEBUG_FS - -#define HSU_REGS_BUFSIZE 1024 - - -static ssize_t port_show_regs(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct uart_hsu_port *up = file->private_data; - char *buf; - u32 len = 0; - ssize_t ret; - - buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); - if (!buf) - return 0; - - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MFD HSU port[%d] regs:\n", up->index); - - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "=================================\n"); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "IER: \t\t0x%08x\n", serial_in(up, UART_IER)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "IIR: \t\t0x%08x\n", serial_in(up, UART_IIR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "LCR: \t\t0x%08x\n", serial_in(up, UART_LCR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MCR: \t\t0x%08x\n", serial_in(up, UART_MCR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "LSR: \t\t0x%08x\n", serial_in(up, UART_LSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MSR: \t\t0x%08x\n", serial_in(up, UART_MSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "FOR: \t\t0x%08x\n", serial_in(up, UART_FOR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "PS: \t\t0x%08x\n", serial_in(up, UART_PS)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MUL: \t\t0x%08x\n", serial_in(up, UART_MUL)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "DIV: \t\t0x%08x\n", serial_in(up, UART_DIV)); - - if (len > HSU_REGS_BUFSIZE) - len = HSU_REGS_BUFSIZE; - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); - kfree(buf); - return ret; -} - -static ssize_t dma_show_regs(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct hsu_dma_chan *chan = file->private_data; - char *buf; - u32 len = 0; - ssize_t ret; - - buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); - if (!buf) - return 0; - - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MFD HSU DMA channel [%d] regs:\n", chan->id); - - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "=================================\n"); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "CR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_CR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "DCR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_DCR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "BSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_BSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MOTSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_MOTSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0SAR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0TSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1SAR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1TSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2SAR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2TSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3SAR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR)); - - if (len > HSU_REGS_BUFSIZE) - len = HSU_REGS_BUFSIZE; - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); - kfree(buf); - return ret; -} - -static const struct file_operations port_regs_ops = { - .owner = THIS_MODULE, - .open = simple_open, - .read = port_show_regs, - .llseek = default_llseek, -}; - -static const struct file_operations dma_regs_ops = { - .owner = THIS_MODULE, - .open = simple_open, - .read = dma_show_regs, - .llseek = default_llseek, -}; - -static int hsu_debugfs_init(struct hsu_port *hsu) -{ - int i; - char name[32]; - - hsu->debugfs = debugfs_create_dir("hsu", NULL); - if (!hsu->debugfs) - return -ENOMEM; - - for (i = 0; i < 3; i++) { - snprintf(name, sizeof(name), "port_%d_regs", i); - debugfs_create_file(name, S_IFREG | S_IRUGO, - hsu->debugfs, (void *)(&hsu->port[i]), &port_regs_ops); - } - - for (i = 0; i < 6; i++) { - snprintf(name, sizeof(name), "dma_chan_%d_regs", i); - debugfs_create_file(name, S_IFREG | S_IRUGO, - hsu->debugfs, (void *)&hsu->chans[i], &dma_regs_ops); - } - - return 0; -} - -static void hsu_debugfs_remove(struct hsu_port *hsu) -{ - if (hsu->debugfs) - debugfs_remove_recursive(hsu->debugfs); -} - -#else -static inline int hsu_debugfs_init(struct hsu_port *hsu) -{ - return 0; -} - -static inline void hsu_debugfs_remove(struct hsu_port *hsu) -{ -} -#endif /* CONFIG_DEBUG_FS */ - -static void serial_hsu_enable_ms(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); -} - -static void hsu_dma_tx(struct uart_hsu_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - struct hsu_dma_buffer *dbuf = &up->txbuf; - int count; - - /* test_and_set_bit may be better, but anyway it's in lock protected mode */ - if (up->dma_tx_on) - return; - - /* Update the circ buf info */ - xmit->tail += dbuf->ofs; - xmit->tail &= UART_XMIT_SIZE - 1; - - up->port.icount.tx += dbuf->ofs; - dbuf->ofs = 0; - - /* Disable the channel */ - chan_writel(up->txc, HSU_CH_CR, 0x0); - - if (!uart_circ_empty(xmit) && !uart_tx_stopped(&up->port)) { - dma_sync_single_for_device(up->port.dev, - dbuf->dma_addr, - dbuf->dma_size, - DMA_TO_DEVICE); - - count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - dbuf->ofs = count; - - /* Reprogram the channel */ - chan_writel(up->txc, HSU_CH_D0SAR, dbuf->dma_addr + xmit->tail); - chan_writel(up->txc, HSU_CH_D0TSR, count); - - /* Reenable the channel */ - chan_writel(up->txc, HSU_CH_DCR, 0x1 - | (0x1 << 8) - | (0x1 << 16) - | (0x1 << 24)); - up->dma_tx_on = 1; - chan_writel(up->txc, HSU_CH_CR, 0x1); - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); -} - -/* The buffer is already cache coherent */ -static void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, - struct hsu_dma_buffer *dbuf) -{ - dbuf->ofs = 0; - - chan_writel(rxc, HSU_CH_BSR, 32); - chan_writel(rxc, HSU_CH_MOTSR, 4); - - chan_writel(rxc, HSU_CH_D0SAR, dbuf->dma_addr); - chan_writel(rxc, HSU_CH_D0TSR, dbuf->dma_size); - chan_writel(rxc, HSU_CH_DCR, 0x1 | (0x1 << 8) - | (0x1 << 16) - | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ - ); - chan_writel(rxc, HSU_CH_CR, 0x3); -} - -/* Protected by spin_lock_irqsave(port->lock) */ -static void serial_hsu_start_tx(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - - if (up->use_dma) { - hsu_dma_tx(up); - } else if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static void serial_hsu_stop_tx(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - struct hsu_dma_chan *txc = up->txc; - - if (up->use_dma) - chan_writel(txc, HSU_CH_CR, 0x0); - else if (up->ier & UART_IER_THRI) { - up->ier &= ~UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -/* This is always called in spinlock protected mode, so - * modify timeout timer is safe here */ -static void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts, - unsigned long *flags) -{ - struct hsu_dma_buffer *dbuf = &up->rxbuf; - struct hsu_dma_chan *chan = up->rxc; - struct uart_port *port = &up->port; - struct tty_port *tport = &port->state->port; - int count; - - /* - * First need to know how many is already transferred, - * then check if its a timeout DMA irq, and return - * the trail bytes out, push them up and reenable the - * channel - */ - - /* Timeout IRQ, need wait some time, see Errata 2 */ - if (int_sts & 0xf00) - udelay(2); - - /* Stop the channel */ - chan_writel(chan, HSU_CH_CR, 0x0); - - count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; - if (!count) { - /* Restart the channel before we leave */ - chan_writel(chan, HSU_CH_CR, 0x3); - return; - } - - dma_sync_single_for_cpu(port->dev, dbuf->dma_addr, - dbuf->dma_size, DMA_FROM_DEVICE); - - /* - * Head will only wrap around when we recycle - * the DMA buffer, and when that happens, we - * explicitly set tail to 0. So head will - * always be greater than tail. - */ - tty_insert_flip_string(tport, dbuf->buf, count); - port->icount.rx += count; - - dma_sync_single_for_device(up->port.dev, dbuf->dma_addr, - dbuf->dma_size, DMA_FROM_DEVICE); - - /* Reprogram the channel */ - chan_writel(chan, HSU_CH_D0SAR, dbuf->dma_addr); - chan_writel(chan, HSU_CH_D0TSR, dbuf->dma_size); - chan_writel(chan, HSU_CH_DCR, 0x1 - | (0x1 << 8) - | (0x1 << 16) - | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ - ); - spin_unlock_irqrestore(&up->port.lock, *flags); - tty_flip_buffer_push(tport); - spin_lock_irqsave(&up->port.lock, *flags); - - chan_writel(chan, HSU_CH_CR, 0x3); - -} - -static void serial_hsu_stop_rx(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - struct hsu_dma_chan *chan = up->rxc; - - if (up->use_dma) - chan_writel(chan, HSU_CH_CR, 0x2); - else { - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); - } -} - -static inline void receive_chars(struct uart_hsu_port *up, int *status, - unsigned long *flags) -{ - unsigned int ch, flag; - unsigned int max_count = 256; - - do { - ch = serial_in(up, UART_RX); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) { - - dev_warn(up->dev, "We really rush into ERR/BI case" - "status = 0x%02x", *status); - /* For statistics only */ - if (*status & UART_LSR_BI) { - *status &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (*status & UART_LSR_PE) - up->port.icount.parity++; - else if (*status & UART_LSR_FE) - up->port.icount.frame++; - if (*status & UART_LSR_OE) - up->port.icount.overrun++; - - /* Mask off conditions which should be ignored. */ - *status &= up->port.read_status_mask; - -#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE - if (up->port.cons && - up->port.cons->index == up->port.line) { - /* Recover the break flag from console xmit */ - *status |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } -#endif - if (*status & UART_LSR_BI) { - flag = TTY_BREAK; - } else if (*status & UART_LSR_PE) - flag = TTY_PARITY; - else if (*status & UART_LSR_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - - uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); - ignore_char: - *status = serial_in(up, UART_LSR); - } while ((*status & UART_LSR_DR) && max_count--); - - spin_unlock_irqrestore(&up->port.lock, *flags); - tty_flip_buffer_push(&up->port.state->port); - spin_lock_irqsave(&up->port.lock, *flags); -} - -static void transmit_chars(struct uart_hsu_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - serial_out(up, UART_TX, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - serial_hsu_stop_tx(&up->port); - return; - } - - /* The IRQ is for TX FIFO half-empty */ - count = up->port.fifosize / 2; - - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) - serial_hsu_stop_tx(&up->port); -} - -static inline void check_modem_status(struct uart_hsu_port *up) -{ - int status; - - status = serial_in(up, UART_MSR); - - if ((status & UART_MSR_ANY_DELTA) == 0) - return; - - if (status & UART_MSR_TERI) - up->port.icount.rng++; - if (status & UART_MSR_DDSR) - up->port.icount.dsr++; - /* We may only get DDCD when HW init and reset */ - if (status & UART_MSR_DDCD) - uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); - /* Will start/stop_tx accordingly */ - if (status & UART_MSR_DCTS) - uart_handle_cts_change(&up->port, status & UART_MSR_CTS); - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); -} - -/* - * This handles the interrupt from one port. - */ -static irqreturn_t port_irq(int irq, void *dev_id) -{ - struct uart_hsu_port *up = dev_id; - unsigned int iir, lsr; - unsigned long flags; - - if (unlikely(!up->running)) - return IRQ_NONE; - - spin_lock_irqsave(&up->port.lock, flags); - if (up->use_dma) { - lsr = serial_in(up, UART_LSR); - if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) - dev_warn(up->dev, - "Got lsr irq while using DMA, lsr = 0x%2x\n", - lsr); - check_modem_status(up); - spin_unlock_irqrestore(&up->port.lock, flags); - return IRQ_HANDLED; - } - - iir = serial_in(up, UART_IIR); - if (iir & UART_IIR_NO_INT) { - spin_unlock_irqrestore(&up->port.lock, flags); - return IRQ_NONE; - } - - lsr = serial_in(up, UART_LSR); - if (lsr & UART_LSR_DR) - receive_chars(up, &lsr, &flags); - check_modem_status(up); - - /* lsr will be renewed during the receive_chars */ - if (lsr & UART_LSR_THRE) - transmit_chars(up); - - spin_unlock_irqrestore(&up->port.lock, flags); - return IRQ_HANDLED; -} - -static inline void dma_chan_irq(struct hsu_dma_chan *chan) -{ - struct uart_hsu_port *up = chan->uport; - unsigned long flags; - u32 int_sts; - - spin_lock_irqsave(&up->port.lock, flags); - - if (!up->use_dma || !up->running) - goto exit; - - /* - * No matter what situation, need read clear the IRQ status - * There is a bug, see Errata 5, HSD 2900918 - */ - int_sts = chan_readl(chan, HSU_CH_SR); - - /* Rx channel */ - if (chan->dirt == DMA_FROM_DEVICE) - hsu_dma_rx(up, int_sts, &flags); - - /* Tx channel */ - if (chan->dirt == DMA_TO_DEVICE) { - chan_writel(chan, HSU_CH_CR, 0x0); - up->dma_tx_on = 0; - hsu_dma_tx(up); - } - -exit: - spin_unlock_irqrestore(&up->port.lock, flags); - return; -} - -static irqreturn_t dma_irq(int irq, void *dev_id) -{ - struct hsu_port *hsu = dev_id; - u32 int_sts, i; - - int_sts = mfd_readl(hsu, HSU_GBL_DMAISR); - - /* Currently we only have 6 channels may be used */ - for (i = 0; i < 6; i++) { - if (int_sts & 0x1) - dma_chan_irq(&hsu->chans[i]); - int_sts >>= 1; - } - - return IRQ_HANDLED; -} - -static unsigned int serial_hsu_tx_empty(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int serial_hsu_get_mctrl(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned char status; - unsigned int ret; - - status = serial_in(up, UART_MSR); - - ret = 0; - if (status & UART_MSR_DCD) - ret |= TIOCM_CAR; - if (status & UART_MSR_RI) - ret |= TIOCM_RNG; - if (status & UART_MSR_DSR) - ret |= TIOCM_DSR; - if (status & UART_MSR_CTS) - ret |= TIOCM_CTS; - return ret; -} - -static void serial_hsu_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned char mcr = 0; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - mcr |= up->mcr; - - serial_out(up, UART_MCR, mcr); -} - -static void serial_hsu_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - up->lcr |= UART_LCR_SBC; - else - up->lcr &= ~UART_LCR_SBC; - serial_out(up, UART_LCR, up->lcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -/* - * What special to do: - * 1. chose the 64B fifo mode - * 2. start dma or pio depends on configuration - * 3. we only allocate dma memory when needed - */ -static int serial_hsu_startup(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned long flags; - - pm_runtime_get_sync(up->dev); - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); - - /* Clear the interrupt registers. */ - (void) serial_in(up, UART_LSR); - (void) serial_in(up, UART_RX); - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - - /* Now, initialize the UART, default is 8n1 */ - serial_out(up, UART_LCR, UART_LCR_WLEN8); - - spin_lock_irqsave(&up->port.lock, flags); - - up->port.mctrl |= TIOCM_OUT2; - serial_hsu_set_mctrl(&up->port, up->port.mctrl); - - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - */ - if (!up->use_dma) - up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE; - else - up->ier = 0; - serial_out(up, UART_IER, up->ier); - - spin_unlock_irqrestore(&up->port.lock, flags); - - /* DMA init */ - if (up->use_dma) { - struct hsu_dma_buffer *dbuf; - struct circ_buf *xmit = &port->state->xmit; - - up->dma_tx_on = 0; - - /* First allocate the RX buffer */ - dbuf = &up->rxbuf; - dbuf->buf = kzalloc(HSU_DMA_BUF_SIZE, GFP_KERNEL); - if (!dbuf->buf) { - up->use_dma = 0; - goto exit; - } - dbuf->dma_addr = dma_map_single(port->dev, - dbuf->buf, - HSU_DMA_BUF_SIZE, - DMA_FROM_DEVICE); - dbuf->dma_size = HSU_DMA_BUF_SIZE; - - /* Start the RX channel right now */ - hsu_dma_start_rx_chan(up->rxc, dbuf); - - /* Next init the TX DMA */ - dbuf = &up->txbuf; - dbuf->buf = xmit->buf; - dbuf->dma_addr = dma_map_single(port->dev, - dbuf->buf, - UART_XMIT_SIZE, - DMA_TO_DEVICE); - dbuf->dma_size = UART_XMIT_SIZE; - - /* This should not be changed all around */ - chan_writel(up->txc, HSU_CH_BSR, 32); - chan_writel(up->txc, HSU_CH_MOTSR, 4); - dbuf->ofs = 0; - } - -exit: - /* And clear the interrupt registers again for luck. */ - (void) serial_in(up, UART_LSR); - (void) serial_in(up, UART_RX); - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - - up->running = 1; - return 0; -} - -static void serial_hsu_shutdown(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned long flags; - - /* Disable interrupts from this port */ - up->ier = 0; - serial_out(up, UART_IER, 0); - up->running = 0; - - spin_lock_irqsave(&up->port.lock, flags); - up->port.mctrl &= ~TIOCM_OUT2; - serial_hsu_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* Disable break condition and FIFOs */ - serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); - - pm_runtime_put(up->dev); -} - -static void -serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned char cval, fcr = 0; - unsigned long flags; - unsigned int baud, quot; - u32 ps, mul; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } - - /* CMSPAR isn't supported by this driver */ - termios->c_cflag &= ~CMSPAR; - - if (termios->c_cflag & CSTOPB) - cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(termios->c_cflag & PARODD)) - cval |= UART_LCR_EPAR; - - /* - * The base clk is 50Mhz, and the baud rate come from: - * baud = 50M * MUL / (DIV * PS * DLAB) - * - * For those basic low baud rate we can get the direct - * scalar from 2746800, like 115200 = 2746800/24. For those - * higher baud rate, we handle them case by case, mainly by - * adjusting the MUL/PS registers, and DIV register is kept - * as default value 0x3d09 to make things simple - */ - baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - - quot = 1; - ps = 0x10; - mul = 0x3600; - switch (baud) { - case 3500000: - mul = 0x3345; - ps = 0xC; - break; - case 1843200: - mul = 0x2400; - break; - case 3000000: - case 2500000: - case 2000000: - case 1500000: - case 1000000: - case 500000: - /* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */ - mul = baud / 500000 * 0x9C4; - break; - default: - /* Use uart_get_divisor to get quot for other baud rates */ - quot = 0; - } - - if (!quot) - quot = uart_get_divisor(port, baud); - - if ((up->port.uartclk / quot) < (2400 * 16)) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B; - else if ((up->port.uartclk / quot) < (230400 * 16)) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_16B; - else - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B; - - fcr |= UART_FCR_HSU_64B_FIFO; - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* Update the per-port timeout */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* Characters to ignore */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* Ignore all characters if CREAD is not set */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * CTS flow control flag and modem status interrupts, disable - * MSI by default - */ - up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->ier |= UART_IER_MSI; - - serial_out(up, UART_IER, up->ier); - - if (termios->c_cflag & CRTSCTS) - up->mcr |= UART_MCR_AFE | UART_MCR_RTS; - else - up->mcr &= ~UART_MCR_AFE; - - serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ - serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ - serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ - serial_out(up, UART_LCR, cval); /* reset DLAB */ - serial_out(up, UART_MUL, mul); /* set MUL */ - serial_out(up, UART_PS, ps); /* set PS */ - up->lcr = cval; /* Save LCR */ - serial_hsu_set_mctrl(&up->port, up->port.mctrl); - serial_out(up, UART_FCR, fcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void -serial_hsu_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ -} - -static void serial_hsu_release_port(struct uart_port *port) -{ -} - -static int serial_hsu_request_port(struct uart_port *port) -{ - return 0; -} - -static void serial_hsu_config_port(struct uart_port *port, int flags) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - up->port.type = PORT_MFD; -} - -static int -serial_hsu_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - /* We don't want the core code to modify any port params */ - return -EINVAL; -} - -static const char * -serial_hsu_type(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - return up->name; -} - -/* Mainly for uart console use */ -static struct uart_hsu_port *serial_hsu_ports[3]; -static struct uart_driver serial_hsu_reg; - -#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -/* Wait for transmitter & holding register to empty */ -static inline void wait_for_xmitr(struct uart_hsu_port *up) -{ - unsigned int status, tmout = 1000; - - /* Wait up to 1ms for the character to be sent. */ - do { - status = serial_in(up, UART_LSR); - - if (status & UART_LSR_BI) - up->lsr_break_flag = UART_LSR_BI; - - if (--tmout == 0) - break; - udelay(1); - } while (!(status & BOTH_EMPTY)); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout && - ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) - udelay(1); - } -} - -static void serial_hsu_console_putchar(struct uart_port *port, int ch) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - - wait_for_xmitr(up); - serial_out(up, UART_TX, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void -serial_hsu_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_hsu_port *up = serial_hsu_ports[co->index]; - unsigned long flags; - unsigned int ier; - int locked = 1; - - touch_nmi_watchdog(); - - local_irq_save(flags); - if (up->port.sysrq) - locked = 0; - else if (oops_in_progress) { - locked = spin_trylock(&up->port.lock); - } else - spin_lock(&up->port.lock); - - /* First save the IER then disable the interrupts */ - ier = serial_in(up, UART_IER); - serial_out(up, UART_IER, 0); - - uart_console_write(&up->port, s, count, serial_hsu_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - serial_out(up, UART_IER, ier); - - if (locked) - spin_unlock(&up->port.lock); - local_irq_restore(flags); -} - -static struct console serial_hsu_console; - -static int __init -serial_hsu_console_setup(struct console *co, char *options) -{ - struct uart_hsu_port *up; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index == -1 || co->index >= serial_hsu_reg.nr) - co->index = 0; - up = serial_hsu_ports[co->index]; - if (!up) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&up->port, co, baud, parity, bits, flow); -} - -static struct console serial_hsu_console = { - .name = "ttyMFD", - .write = serial_hsu_console_write, - .device = uart_console_device, - .setup = serial_hsu_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &serial_hsu_reg, -}; - -#define SERIAL_HSU_CONSOLE (&serial_hsu_console) -#else -#define SERIAL_HSU_CONSOLE NULL -#endif - -static struct uart_ops serial_hsu_pops = { - .tx_empty = serial_hsu_tx_empty, - .set_mctrl = serial_hsu_set_mctrl, - .get_mctrl = serial_hsu_get_mctrl, - .stop_tx = serial_hsu_stop_tx, - .start_tx = serial_hsu_start_tx, - .stop_rx = serial_hsu_stop_rx, - .enable_ms = serial_hsu_enable_ms, - .break_ctl = serial_hsu_break_ctl, - .startup = serial_hsu_startup, - .shutdown = serial_hsu_shutdown, - .set_termios = serial_hsu_set_termios, - .pm = serial_hsu_pm, - .type = serial_hsu_type, - .release_port = serial_hsu_release_port, - .request_port = serial_hsu_request_port, - .config_port = serial_hsu_config_port, - .verify_port = serial_hsu_verify_port, -}; - -static struct uart_driver serial_hsu_reg = { - .owner = THIS_MODULE, - .driver_name = "MFD serial", - .dev_name = "ttyMFD", - .major = TTY_MAJOR, - .minor = 128, - .nr = 3, - .cons = SERIAL_HSU_CONSOLE, -}; - -#ifdef CONFIG_PM -static int serial_hsu_suspend(struct pci_dev *pdev, pm_message_t state) -{ - void *priv = pci_get_drvdata(pdev); - struct uart_hsu_port *up; - - /* Make sure this is not the internal dma controller */ - if (priv && (pdev->device != 0x081E)) { - up = priv; - uart_suspend_port(&serial_hsu_reg, &up->port); - } - - pci_save_state(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - return 0; -} - -static int serial_hsu_resume(struct pci_dev *pdev) -{ - void *priv = pci_get_drvdata(pdev); - struct uart_hsu_port *up; - int ret; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - - ret = pci_enable_device(pdev); - if (ret) - dev_warn(&pdev->dev, - "HSU: can't re-enable device, try to continue\n"); - - if (priv && (pdev->device != 0x081E)) { - up = priv; - uart_resume_port(&serial_hsu_reg, &up->port); - } - return 0; -} - -static int serial_hsu_runtime_idle(struct device *dev) -{ - pm_schedule_suspend(dev, 500); - return -EBUSY; -} - -static int serial_hsu_runtime_suspend(struct device *dev) -{ - return 0; -} - -static int serial_hsu_runtime_resume(struct device *dev) -{ - return 0; -} -#else -#define serial_hsu_suspend NULL -#define serial_hsu_resume NULL -#define serial_hsu_runtime_idle NULL -#define serial_hsu_runtime_suspend NULL -#define serial_hsu_runtime_resume NULL -#endif - -static const struct dev_pm_ops serial_hsu_pm_ops = { - .runtime_suspend = serial_hsu_runtime_suspend, - .runtime_resume = serial_hsu_runtime_resume, - .runtime_idle = serial_hsu_runtime_idle, -}; - -/* temp global pointer before we settle down on using one or four PCI dev */ -static struct hsu_port *phsu; - -static int serial_hsu_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct uart_hsu_port *uport; - int index, ret; - - printk(KERN_INFO "HSU: found PCI Serial controller(ID: %04x:%04x)\n", - pdev->vendor, pdev->device); - - switch (pdev->device) { - case 0x081B: - index = 0; - break; - case 0x081C: - index = 1; - break; - case 0x081D: - index = 2; - break; - case 0x081E: - /* internal DMA controller */ - index = 3; - break; - default: - dev_err(&pdev->dev, "HSU: out of index!"); - return -ENODEV; - } - - ret = pci_enable_device(pdev); - if (ret) - return ret; - - if (index == 3) { - /* DMA controller */ - ret = request_irq(pdev->irq, dma_irq, 0, "hsu_dma", phsu); - if (ret) { - dev_err(&pdev->dev, "can not get IRQ\n"); - goto err_disable; - } - pci_set_drvdata(pdev, phsu); - } else { - /* UART port 0~2 */ - uport = &phsu->port[index]; - uport->port.irq = pdev->irq; - uport->port.dev = &pdev->dev; - uport->dev = &pdev->dev; - - ret = request_irq(pdev->irq, port_irq, 0, uport->name, uport); - if (ret) { - dev_err(&pdev->dev, "can not get IRQ\n"); - goto err_disable; - } - uart_add_one_port(&serial_hsu_reg, &uport->port); - - pci_set_drvdata(pdev, uport); - } - - pm_runtime_put_noidle(&pdev->dev); - pm_runtime_allow(&pdev->dev); - - return 0; - -err_disable: - pci_disable_device(pdev); - return ret; -} - -static void hsu_global_init(void) -{ - struct hsu_port *hsu; - struct uart_hsu_port *uport; - struct hsu_dma_chan *dchan; - int i, ret; - - hsu = kzalloc(sizeof(struct hsu_port), GFP_KERNEL); - if (!hsu) - return; - - /* Get basic io resource and map it */ - hsu->paddr = 0xffa28000; - hsu->iolen = 0x1000; - - if (!(request_mem_region(hsu->paddr, hsu->iolen, "HSU global"))) - pr_warn("HSU: error in request mem region\n"); - - hsu->reg = ioremap_nocache((unsigned long)hsu->paddr, hsu->iolen); - if (!hsu->reg) { - pr_err("HSU: error in ioremap\n"); - ret = -ENOMEM; - goto err_free_region; - } - - /* Initialise the 3 UART ports */ - uport = hsu->port; - for (i = 0; i < 3; i++) { - uport->port.type = PORT_MFD; - uport->port.iotype = UPIO_MEM; - uport->port.mapbase = (resource_size_t)hsu->paddr - + HSU_PORT_REG_OFFSET - + i * HSU_PORT_REG_LENGTH; - uport->port.membase = hsu->reg + HSU_PORT_REG_OFFSET - + i * HSU_PORT_REG_LENGTH; - - sprintf(uport->name, "hsu_port%d", i); - uport->port.fifosize = 64; - uport->port.ops = &serial_hsu_pops; - uport->port.line = i; - uport->port.flags = UPF_IOREMAP; - /* set the scalable maxim support rate to 2746800 bps */ - uport->port.uartclk = 115200 * 24 * 16; - - uport->running = 0; - uport->txc = &hsu->chans[i * 2]; - uport->rxc = &hsu->chans[i * 2 + 1]; - - serial_hsu_ports[i] = uport; - uport->index = i; - - if (hsu_dma_enable & (1<use_dma = 1; - else - uport->use_dma = 0; - - uport++; - } - - /* Initialise 6 dma channels */ - dchan = hsu->chans; - for (i = 0; i < 6; i++) { - dchan->id = i; - dchan->dirt = (i & 0x1) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; - dchan->uport = &hsu->port[i/2]; - dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET + - i * HSU_DMA_CHANS_REG_LENGTH; - - dchan++; - } - - phsu = hsu; - hsu_debugfs_init(hsu); - return; - -err_free_region: - release_mem_region(hsu->paddr, hsu->iolen); - kfree(hsu); - return; -} - -static void serial_hsu_remove(struct pci_dev *pdev) -{ - void *priv = pci_get_drvdata(pdev); - struct uart_hsu_port *up; - - if (!priv) - return; - - pm_runtime_forbid(&pdev->dev); - pm_runtime_get_noresume(&pdev->dev); - - /* For port 0/1/2, priv is the address of uart_hsu_port */ - if (pdev->device != 0x081E) { - up = priv; - uart_remove_one_port(&serial_hsu_reg, &up->port); - } - - free_irq(pdev->irq, priv); - pci_disable_device(pdev); -} - -/* First 3 are UART ports, and the 4th is the DMA */ -static const struct pci_device_id pci_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081E) }, - {}, -}; - -static struct pci_driver hsu_pci_driver = { - .name = "HSU serial", - .id_table = pci_ids, - .probe = serial_hsu_probe, - .remove = serial_hsu_remove, - .suspend = serial_hsu_suspend, - .resume = serial_hsu_resume, - .driver = { - .pm = &serial_hsu_pm_ops, - }, -}; - -static int __init hsu_pci_init(void) -{ - int ret; - - hsu_global_init(); - - ret = uart_register_driver(&serial_hsu_reg); - if (ret) - return ret; - - return pci_register_driver(&hsu_pci_driver); -} - -static void __exit hsu_pci_exit(void) -{ - pci_unregister_driver(&hsu_pci_driver); - uart_unregister_driver(&serial_hsu_reg); - - hsu_debugfs_remove(phsu); - - kfree(phsu); -} - -module_init(hsu_pci_init); -module_exit(hsu_pci_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DEVICE_TABLE(pci, pci_ids); diff --git a/include/linux/serial_mfd.h b/include/linux/serial_mfd.h deleted file mode 100644 index 2b071e0..0000000 --- a/include/linux/serial_mfd.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef _SERIAL_MFD_H_ -#define _SERIAL_MFD_H_ - -/* HW register offset definition */ -#define UART_FOR 0x08 -#define UART_PS 0x0C -#define UART_MUL 0x0D -#define UART_DIV 0x0E - -#define HSU_GBL_IEN 0x0 -#define HSU_GBL_IST 0x4 - -#define HSU_GBL_INT_BIT_PORT0 0x0 -#define HSU_GBL_INT_BIT_PORT1 0x1 -#define HSU_GBL_INT_BIT_PORT2 0x2 -#define HSU_GBL_INT_BIT_IRI 0x3 -#define HSU_GBL_INT_BIT_HDLC 0x4 -#define HSU_GBL_INT_BIT_DMA 0x5 - -#define HSU_GBL_ISR 0x8 -#define HSU_GBL_DMASR 0x400 -#define HSU_GBL_DMAISR 0x404 - -#define HSU_PORT_REG_OFFSET 0x80 -#define HSU_PORT0_REG_OFFSET 0x80 -#define HSU_PORT1_REG_OFFSET 0x100 -#define HSU_PORT2_REG_OFFSET 0x180 -#define HSU_PORT_REG_LENGTH 0x80 - -#define HSU_DMA_CHANS_REG_OFFSET 0x500 -#define HSU_DMA_CHANS_REG_LENGTH 0x40 - -#define HSU_CH_SR 0x0 /* channel status reg */ -#define HSU_CH_CR 0x4 /* control reg */ -#define HSU_CH_DCR 0x8 /* descriptor control reg */ -#define HSU_CH_BSR 0x10 /* max fifo buffer size reg */ -#define HSU_CH_MOTSR 0x14 /* minimum ocp transfer size */ -#define HSU_CH_D0SAR 0x20 /* desc 0 start addr */ -#define HSU_CH_D0TSR 0x24 /* desc 0 transfer size */ -#define HSU_CH_D1SAR 0x28 -#define HSU_CH_D1TSR 0x2C -#define HSU_CH_D2SAR 0x30 -#define HSU_CH_D2TSR 0x34 -#define HSU_CH_D3SAR 0x38 -#define HSU_CH_D3TSR 0x3C - -#endif diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index 00adb01..e9b4cb0 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -242,25 +242,6 @@ #define UART_FCR_PXAR32 0xc0 /* receive FIFO threshold = 32 */ /* - * Intel MID on-chip HSU (High Speed UART) defined bits - */ -#define UART_FCR_HSU_64_1B 0x00 /* receive FIFO treshold = 1 */ -#define UART_FCR_HSU_64_16B 0x40 /* receive FIFO treshold = 16 */ -#define UART_FCR_HSU_64_32B 0x80 /* receive FIFO treshold = 32 */ -#define UART_FCR_HSU_64_56B 0xc0 /* receive FIFO treshold = 56 */ - -#define UART_FCR_HSU_16_1B 0x00 /* receive FIFO treshold = 1 */ -#define UART_FCR_HSU_16_4B 0x40 /* receive FIFO treshold = 4 */ -#define UART_FCR_HSU_16_8B 0x80 /* receive FIFO treshold = 8 */ -#define UART_FCR_HSU_16_14B 0xc0 /* receive FIFO treshold = 14 */ - -#define UART_FCR_HSU_64B_FIFO 0x20 /* chose 64 bytes FIFO */ -#define UART_FCR_HSU_16B_FIFO 0x00 /* chose 16 bytes FIFO */ - -#define UART_FCR_HALF_EMPT_TXI 0x00 /* trigger TX_EMPT IRQ for half empty */ -#define UART_FCR_FULL_EMPT_TXI 0x08 /* trigger TX_EMPT IRQ for full empty */ - -/* * These register definitions are for the 16C950 */ #define UART_ASR 0x01 /* Additional Status Register */