| Message ID | 1453197766-18976-6-git-send-email-sricharan@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Tue, Jan 19, 2016 at 2:02 AM, Sricharan R <sricharan@codeaurora.org> wrote: > Signed-off-by: Sricharan R <sricharan@codeaurora.org> > Reviewed-by: Andy Gross <andy.gross@linaro.org> > --- > arch/arm/boot/dts/qcom-msm8974.dtsi | 12 +++++++++++- > 1 file changed, 11 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi > index 753bdfd..7786408 100644 > --- a/arch/arm/boot/dts/qcom-msm8974.dtsi > +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi > @@ -1,6 +1,6 @@ > /dts-v1/; > > -#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/clock/qcom,gcc-msm8974.h> > #include "skeleton.dtsi" > > @@ -345,6 +345,16 @@ > interrupt-controller; > #interrupt-cells = <4>; > }; > + > + blsp2_dma: dma-controller@f9944000 { > + compatible = "qcom,bam-v1.4.0"; > + reg = <0xf9944000 0x19000>; > + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&gcc GCC_BLSP2_AHB_CLK>; > + clock-names = "bam_clk"; > + #dma-cells = <1>; > + qcom,ee = <0>; Without "qcom,bam_ctrl_remote;" and https://patchwork.kernel.org/patch/8639181/ the Xperia Honami board fails to boot with this patch included. > + }; > }; > Regards, Bjorn -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Mar 25, 2016 at 04:17:30PM -0700, Bjorn Andersson wrote: > On Tue, Jan 19, 2016 at 2:02 AM, Sricharan R <sricharan@codeaurora.org> wrote: > > Signed-off-by: Sricharan R <sricharan@codeaurora.org> > > Reviewed-by: Andy Gross <andy.gross@linaro.org> <snip> > > + blsp2_dma: dma-controller@f9944000 { > > + compatible = "qcom,bam-v1.4.0"; > > + reg = <0xf9944000 0x19000>; > > + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&gcc GCC_BLSP2_AHB_CLK>; > > + clock-names = "bam_clk"; > > + #dma-cells = <1>; > > + qcom,ee = <0>; > > Without "qcom,bam_ctrl_remote;" and > https://patchwork.kernel.org/patch/8639181/ the Xperia Honami board > fails to boot with this patch included. Ouch. At least one set of pipes must be used by some other processor and TZ has locked down that BLSP. -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> On Fri, Mar 25, 2016 at 04:17:30PM -0700, Bjorn Andersson wrote: > > On Tue, Jan 19, 2016 at 2:02 AM, Sricharan R <sricharan@codeaurora.org> > wrote: > > > Signed-off-by: Sricharan R <sricharan@codeaurora.org> > > > Reviewed-by: Andy Gross <andy.gross@linaro.org> > > <snip> > > > > + blsp2_dma: dma-controller@f9944000 { > > > + compatible = "qcom,bam-v1.4.0"; > > > + reg = <0xf9944000 0x19000>; > > > + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; > > > + clocks = <&gcc GCC_BLSP2_AHB_CLK>; > > > + clock-names = "bam_clk"; > > > + #dma-cells = <1>; > > > + qcom,ee = <0>; > > > > Without "qcom,bam_ctrl_remote;" and > > https://patchwork.kernel.org/patch/8639181/ the Xperia Honami board > > fails to boot with this patch included. > > Ouch. At least one set of pipes must be used by some other processor and > TZ has locked down that BLSP. Hmm, this was not the case atleast on the apq8074DB board that I tested this on. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 753bdfd..7786408 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,6 +1,6 @@ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include "skeleton.dtsi" @@ -345,6 +345,16 @@ interrupt-controller; #interrupt-cells = <4>; }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; }; smd {