diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a4a6d70..5759aac 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -312,8 +312,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \
 	imx6dl-tx6dl-comtft.dtb \
-	imx6dl-tx6u-801x.dtb \
-	imx6dl-tx6u-811x.dtb \
+	imx6dl-tx6u-80xx.dtb \
+	imx6dl-tx6u-81xx.dtb \
 	imx6dl-udoo.dtb \
 	imx6dl-wandboard.dtb \
 	imx6dl-wandboard-revb1.dtb \
@@ -342,11 +342,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
 	imx6q-tbs2910.dtb \
-	imx6q-tx6q-1010.dtb \
-	imx6q-tx6q-1010-comtft.dtb \
 	imx6q-tx6q-1020.dtb \
 	imx6q-tx6q-1020-comtft.dtb \
-	imx6q-tx6q-1110.dtb \
+	imx6q-tx6q-10x0-comtft.dtb \
+	imx6q-tx6q-10x0.dtb \
+	imx6q-tx6q-11x0.dtb \
 	imx6q-udoo.dtb \
 	imx6q-wandboard.dtb \
 	imx6q-wandboard-revb1.dtb
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
deleted file mode 100644
index 5fe465c..0000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-801x Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-        };
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-80xx.dts b/arch/arm/boot/dts/imx6dl-tx6u-80xx.dts
new file mode 100644
index 0000000..f6621d6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-80xx.dts
@@ -0,0 +1,185 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-801x/-803x Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&reg_lcd0_pwr {
+	status = "okay";
+};
+
+&reg_lcd1_pwr {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
deleted file mode 100644
index c275eec..0000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-811x Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_lcd0_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_lcd1_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-};
-
-&i2c3 {
-	polytouch2: eeti@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eeti>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
-		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
-	};
-};
-
-&iomuxc {
-	imx6dl-tx6u-811x {
-		pinctrl_eeti: eetigrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&kpp {
-	status = "disabled"; /* pad conflict with backlight1 PWM */
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds_timing0>;
-			lvds_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "disabled";
-
-		display-timings {
-			native-mode = <&lvds_timing1>;
-			lvds_timing1: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx.dts
new file mode 100644
index 0000000..5ff8e13
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx.dts
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-81xx Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+};
+
+&i2c3 {
+	polytouch1: eeti@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eeti>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		linux,wakeup;
+	};
+};
+
+&iomuxc {
+	imx6dl-tx6u-81xx {
+		pinctrl_eeti: eetigrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&kpp {
+	status = "disabled"; /* pads partially clash with backlight1 PWM */
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds0_timing0>;
+
+			lvds0_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "disabled";
+
+		display-timings {
+			native-mode = <&lvds1_timing0>;
+
+			lvds1_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
deleted file mode 100644
index b18fae1..0000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			native-mode = <&ET070001DM6>;
-
-			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-        };
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
deleted file mode 100644
index b58ec9c..0000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-        };
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0-comtft.dts
new file mode 100644
index 0000000..8997553
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-10x0-comtft.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010/-1030 Module on CoMpact TFT";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &mxcfb0;
+		mxcfb0 = &mxcfb0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	mxcfb0: fb@2 {
+		compatible = "fsl,mxc_sdc_fb";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_2>;
+		disp_dev = "lcd";
+		interface_pix_fmt = "RGB24";
+		mode_str = "";
+		default_bpp = <32>;
+		int_clk = <1>;
+		late_init = <0>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&ET070001DM6>;
+
+			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	lcd: lcd@0 {
+		compatible = "fsl,lcd";
+		ipu_id = <0>;
+		disp_id = <0>;
+		default_ifmt = "RGB24";
+		status = "okay";
+	};
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&reg_lcd0_pwr {
+	status = "okay";
+};
+
+&reg_lcd1_pwr {
+	status = "okay";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0.dts
new file mode 100644
index 0000000..c3782af
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-10x0.dts
@@ -0,0 +1,191 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &display;
+		ipu1 = &ipu1;
+		ipu2 = &ipu2;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&reg_lcd0_pwr {
+	status = "okay";
+};
+
+&reg_lcd1_pwr {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
deleted file mode 100644
index 88aa1e4..0000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1110 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_lcd0_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_lcd1_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-};
-
-&i2c3 {
-	polytouch1: eeti@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eeti>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
-		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
-	};
-};
-
-&iomuxc {
-	imx6q-tx6q-1110 {
-		pinctrl_eeti: eetigrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&kpp {
-	status = "disabled"; /* pad conflict with backlight1 PWM */
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds_timing0>;
-			lvds_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "disabled";
-
-		display-timings {
-			native-mode = <&lvds_timing1>;
-			lvds_timing1: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0.dts
new file mode 100644
index 0000000..c66524b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-11x0.dts
@@ -0,0 +1,249 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &lvds0;
+		ipu1 = &ipu2;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+		mxcfb0 = &lvds0;
+		mxcfb1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	lvds0: fb@0 {
+		compatible = "fsl,mxc_sdc_fb";
+		disp_dev = "ldb";
+		interface_pix_fmt = "RGB666";
+		mode_str = "LDB-XGA";
+		default_bpp = <32>;
+		int_clk = <0>;
+		late_init = <0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds0_timing0>;
+
+			lvds0_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			lvds0_timing1: VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			lvds0_timing2: nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
+	lvds1: fb@1 {
+		compatible = "fsl,mxc_sdc_fb";
+		disp_dev = "ldb";
+		interface_pix_fmt = "RGB666";
+		mode_str = "LDB-XGA";
+		default_bpp = <32>;
+		int_clk = <0>;
+		late_init = <0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds1_timing0>;
+
+			lvds1_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			lvds1_timing1: VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			lvds1_timing2: nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	polytouch1: eeti@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eeti>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		linux,wakeup;
+	};
+};
+
+&iomuxc {
+	imx6q-tx6q-11x0 {
+		pinctrl_eeti: eetigrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&kpp {
+	status = "disabled"; /* pads partially clash with backlight1 PWM */
+};
+
+&ldb {
+	ipu_id = <0>;
+	disp_id = <0>;
+	ext_ref = <0>;
+	mode = "sep0";
+	sec_ipu_id = <0>;
+	sec_disp_id = <1>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
