diff mbox

[v5,03/11] dmaengine: dw: set polarity of handshake interface

Message ID 1462547840-14091-4-git-send-email-andriy.shevchenko@linux.intel.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Andy Shevchenko May 6, 2016, 3:17 p.m. UTC
Intel Quark UART uses DesignWare DMA IP. Though the DMA IP is connected in such
way that handshake interface uses inverted polarity. We have to provide a
possibility to set this in the DMA driver when configuring a channel.

Introduce a new member of custom slave configuration called 'polarity' and set
active low polarity in case this value is 'true'.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/dma/dw/core.c                | 4 ++++
 include/linux/platform_data/dma-dw.h | 2 ++
 2 files changed, 6 insertions(+)
diff mbox

Patch

diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index 81b06df..59f571c 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -150,6 +150,10 @@  static void dwc_initialize(struct dw_dma_chan *dwc)
 	cfghi |= DWC_CFGH_DST_PER(dwc->dws.dst_id);
 	cfghi |= DWC_CFGH_SRC_PER(dwc->dws.src_id);
 
+	/* Set polarity of handshake interface */
+	cfglo |= dwc->dws.hs_polarity ?
+		 DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL : 0;
+
 	channel_writel(dwc, CFG_LO, cfglo);
 	channel_writel(dwc, CFG_HI, cfghi);
 
diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h
index d15d8ba..4636c93 100644
--- a/include/linux/platform_data/dma-dw.h
+++ b/include/linux/platform_data/dma-dw.h
@@ -23,6 +23,7 @@ 
  * @dst_id:	dst request line
  * @m_master:	memory master for transfers on allocated channel
  * @p_master:	peripheral master for transfers on allocated channel
+ * @hs_polarity:set active low polarity of handshake interface
  */
 struct dw_dma_slave {
 	struct device		*dma_dev;
@@ -30,6 +31,7 @@  struct dw_dma_slave {
 	u8			dst_id;
 	u8			m_master;
 	u8			p_master;
+	bool			hs_polarity;
 };
 
 /**