| Message ID | 1468406536-6350-1-git-send-email-appanad@xilinx.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
On Wed, Jul 13, 2016 at 04:12:16PM +0530, Kedareswara rao Appana wrote: > diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c > index f777a5b..2248704 100644 > --- a/drivers/dma/xilinx/zynqmp_dma.c > +++ b/drivers/dma/xilinx/zynqmp_dma.c > @@ -970,8 +970,13 @@ static int zynqmp_dma_chan_probe(struct zynqmp_dma_device *zdev, > chan->dst_burst_len = ZYNQMP_DMA_AWLEN_RST_VAL; > chan->src_burst_len = ZYNQMP_DMA_ARLEN_RST_VAL; > err = of_property_read_u32(node, "xlnx,bus-width", &chan->bus_width); > - if ((err < 0) && ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) || > - (chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_128))) { > + if (err < 0) { > + dev_err(&pdev->dev, "missing xlnx,bus-width property\n"); > + return err; > + } > + > + if ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) || This has to be an && because it can never be both widths. You didn't test this patch. Also too many parenthesis (you're thinking of LISP). > + (chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_128)) { > dev_err(zdev->dev, "invalid bus-width value"); > return err; This has to be a negative error code. regards, dan carpenter -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Dan, Thanks for the review... > On Wed, Jul 13, 2016 at 04:12:16PM +0530, Kedareswara rao Appana wrote: > > diff --git a/drivers/dma/xilinx/zynqmp_dma.c > > b/drivers/dma/xilinx/zynqmp_dma.c index f777a5b..2248704 100644 > > --- a/drivers/dma/xilinx/zynqmp_dma.c > > +++ b/drivers/dma/xilinx/zynqmp_dma.c > > @@ -970,8 +970,13 @@ static int zynqmp_dma_chan_probe(struct > zynqmp_dma_device *zdev, > > chan->dst_burst_len = ZYNQMP_DMA_AWLEN_RST_VAL; > > chan->src_burst_len = ZYNQMP_DMA_ARLEN_RST_VAL; > > err = of_property_read_u32(node, "xlnx,bus-width", &chan- > >bus_width); > > - if ((err < 0) && ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) || > > - (chan->bus_width != > ZYNQMP_DMA_BUS_WIDTH_128))) { > > + if (err < 0) { > > + dev_err(&pdev->dev, "missing xlnx,bus-width property\n"); > > + return err; > > + } > > + > > + if ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) || > > This has to be an && because it can never be both widths. You didn't test this > patch. Also too many parenthesis (you're thinking of LISP). Will fix in the next version... > > > + (chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_128)) { > > dev_err(zdev->dev, "invalid bus-width value"); > > return err; > > This has to be a negative error code. Will fix in the next version... Regards, Kedar. -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c index f777a5b..2248704 100644 --- a/drivers/dma/xilinx/zynqmp_dma.c +++ b/drivers/dma/xilinx/zynqmp_dma.c @@ -970,8 +970,13 @@ static int zynqmp_dma_chan_probe(struct zynqmp_dma_device *zdev, chan->dst_burst_len = ZYNQMP_DMA_AWLEN_RST_VAL; chan->src_burst_len = ZYNQMP_DMA_ARLEN_RST_VAL; err = of_property_read_u32(node, "xlnx,bus-width", &chan->bus_width); - if ((err < 0) && ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) || - (chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_128))) { + if (err < 0) { + dev_err(&pdev->dev, "missing xlnx,bus-width property\n"); + return err; + } + + if ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) || + (chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_128)) { dev_err(zdev->dev, "invalid bus-width value"); return err; }
This patch fixes the below static checker warning drivers/dma/xilinx/zynqmp_dma.c:973 zynqmp_dma_chan_probe() warn: was && intended here instead of ||? Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> --- drivers/dma/xilinx/zynqmp_dma.c | 9 +++++++-- 1 files changed, 7 insertions(+), 2 deletions(-)