diff mbox

[V3,2/2] dmaengine: dmatest: add support for memset test

Message ID 1498789858-18583-2-git-send-email-okaya@codeaurora.org (mailing list archive)
State Accepted
Headers show

Commit Message

Sinan Kaya June 30, 2017, 2:30 a.m. UTC 
Introducing memset test into dmatest. This change allows us to test
memset capable HW using the dmatest test procedure. The new dmatest
value for memset is 2 and it is not the default value.

Memset support patch shares the same code path as the other dmatest
code to reuse as much as we can.

The first value inside the source buffer is used as a pattern
to fill in the destination buffer space.

Prior to running the test, source/destination buffers are initialized
in the current code.

"The remaining bits are the inverse of a counter which increments by
 one for each byte address."

Memset test will fill in the upper bits of pattern with the inverse of
fixed counter value 1 as opposed to an incrementing value in a loop.

An example run is as follows:

echo dma0chan0 > /sys/module/dmatest/parameters/channel
echo 2 >  /sys/module/dmatest/parameters/dmatest
echo 2000 >  /sys/module/dmatest/parameters/timeout
echo 10 >  /sys/module/dmatest/parameters/iterations
echo 1 >  /sys/module/dmatest/parameters/run

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/dma/dmatest.c | 88 +++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 64 insertions(+), 24 deletions(-)

Comments

Vinod Koul July 18, 2017, 4:26 p.m. UTC | #1 
On Thu, Jun 29, 2017 at 10:30:58PM -0400, Sinan Kaya wrote:
> Introducing memset test into dmatest. This change allows us to test
> memset capable HW using the dmatest test procedure. The new dmatest
> value for memset is 2 and it is not the default value.
> 
> Memset support patch shares the same code path as the other dmatest
> code to reuse as much as we can.
> 
> The first value inside the source buffer is used as a pattern
> to fill in the destination buffer space.
> 
> Prior to running the test, source/destination buffers are initialized
> in the current code.
> 
> "The remaining bits are the inverse of a counter which increments by
>  one for each byte address."
> 
> Memset test will fill in the upper bits of pattern with the inverse of
> fixed counter value 1 as opposed to an incrementing value in a loop.
> 
> An example run is as follows:
> 
> echo dma0chan0 > /sys/module/dmatest/parameters/channel
> echo 2 >  /sys/module/dmatest/parameters/dmatest
> echo 2000 >  /sys/module/dmatest/parameters/timeout
> echo 10 >  /sys/module/dmatest/parameters/iterations
> echo 1 >  /sys/module/dmatest/parameters/run

Applied, thanks
diff mbox

Patch

diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index a07ef3d..35cb83b 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -60,7 +60,7 @@ 
 static unsigned int dmatest;
 module_param(dmatest, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(dmatest,
-		"dmatest 0-memcpy 1-slave_sg (default: 0)");
+		"dmatest 0-memcpy 1-slave_sg 2-memset (default: 0)");
 
 static unsigned int xor_sources = 3;
 module_param(xor_sources, uint, S_IRUGO | S_IWUSR);
@@ -158,6 +158,7 @@  struct dmatest_params {
 #define PATTERN_COPY		0x40
 #define PATTERN_OVERWRITE	0x20
 #define PATTERN_COUNT_MASK	0x1f
+#define PATTERN_MEMSET_IDX	0x01
 
 struct dmatest_thread {
 	struct list_head	node;
@@ -239,46 +240,62 @@  static unsigned long dmatest_random(void)
 	return buf;
 }
 
+static inline u8 gen_inv_idx(u8 index, bool is_memset)
+{
+	u8 val = is_memset ? PATTERN_MEMSET_IDX : index;
+
+	return ~val & PATTERN_COUNT_MASK;
+}
+
+static inline u8 gen_src_value(u8 index, bool is_memset)
+{
+	return PATTERN_SRC | gen_inv_idx(index, is_memset);
+}
+
+static inline u8 gen_dst_value(u8 index, bool is_memset)
+{
+	return PATTERN_DST | gen_inv_idx(index, is_memset);
+}
+
 static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len,
-		unsigned int buf_size)
+		unsigned int buf_size, bool is_memset)
 {
 	unsigned int i;
 	u8 *buf;
 
 	for (; (buf = *bufs); bufs++) {
 		for (i = 0; i < start; i++)
-			buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
+			buf[i] = gen_src_value(i, is_memset);
 		for ( ; i < start + len; i++)
-			buf[i] = PATTERN_SRC | PATTERN_COPY
-				| (~i & PATTERN_COUNT_MASK);
+			buf[i] = gen_src_value(i, is_memset) | PATTERN_COPY;
 		for ( ; i < buf_size; i++)
-			buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
+			buf[i] = gen_src_value(i, is_memset);
 		buf++;
 	}
 }
 
 static void dmatest_init_dsts(u8 **bufs, unsigned int start, unsigned int len,
-		unsigned int buf_size)
+		unsigned int buf_size, bool is_memset)
 {
 	unsigned int i;
 	u8 *buf;
 
 	for (; (buf = *bufs); bufs++) {
 		for (i = 0; i < start; i++)
-			buf[i] = PATTERN_DST | (~i & PATTERN_COUNT_MASK);
+			buf[i] = gen_dst_value(i, is_memset);
 		for ( ; i < start + len; i++)
-			buf[i] = PATTERN_DST | PATTERN_OVERWRITE
-				| (~i & PATTERN_COUNT_MASK);
+			buf[i] = gen_dst_value(i, is_memset) |
+						PATTERN_OVERWRITE;
 		for ( ; i < buf_size; i++)
-			buf[i] = PATTERN_DST | (~i & PATTERN_COUNT_MASK);
+			buf[i] = gen_dst_value(i, is_memset);
 	}
 }
 
 static void dmatest_mismatch(u8 actual, u8 pattern, unsigned int index,
-		unsigned int counter, bool is_srcbuf)
+		unsigned int counter, bool is_srcbuf, bool is_memset)
 {
 	u8		diff = actual ^ pattern;
-	u8		expected = pattern | (~counter & PATTERN_COUNT_MASK);
+	u8		expected = pattern | gen_inv_idx(counter, is_memset);
 	const char	*thread_name = current->comm;
 
 	if (is_srcbuf)
@@ -298,7 +315,7 @@  static void dmatest_mismatch(u8 actual, u8 pattern, unsigned int index,
 
 static unsigned int dmatest_verify(u8 **bufs, unsigned int start,
 		unsigned int end, unsigned int counter, u8 pattern,
-		bool is_srcbuf)
+		bool is_srcbuf, bool is_memset)
 {
 	unsigned int i;
 	unsigned int error_count = 0;
@@ -311,11 +328,12 @@  static unsigned int dmatest_verify(u8 **bufs, unsigned int start,
 		counter = counter_orig;
 		for (i = start; i < end; i++) {
 			actual = buf[i];
-			expected = pattern | (~counter & PATTERN_COUNT_MASK);
+			expected = pattern | gen_inv_idx(counter, is_memset);
 			if (actual != expected) {
 				if (error_count < MAX_ERROR_COUNT)
 					dmatest_mismatch(actual, pattern, i,
-							 counter, is_srcbuf);
+							 counter, is_srcbuf,
+							 is_memset);
 				error_count++;
 			}
 			counter++;
@@ -435,6 +453,7 @@  static int dmatest_func(void *data)
 	s64			runtime = 0;
 	unsigned long long	total_len = 0;
 	u8			align = 0;
+	bool			is_memset = false;
 
 	set_freezable();
 
@@ -448,6 +467,10 @@  static int dmatest_func(void *data)
 	if (thread->type == DMA_MEMCPY) {
 		align = dev->copy_align;
 		src_cnt = dst_cnt = 1;
+	} else if (thread->type == DMA_MEMSET) {
+		align = dev->fill_align;
+		src_cnt = dst_cnt = 1;
+		is_memset = true;
 	} else if (thread->type == DMA_SG) {
 		align = dev->copy_align;
 		src_cnt = dst_cnt = sg_buffers;
@@ -571,9 +594,9 @@  static int dmatest_func(void *data)
 			dst_off = (dst_off >> align) << align;
 
 			dmatest_init_srcs(thread->srcs, src_off, len,
-					  params->buf_size);
+					  params->buf_size, is_memset);
 			dmatest_init_dsts(thread->dsts, dst_off, len,
-					  params->buf_size);
+					  params->buf_size, is_memset);
 
 			diff = ktime_sub(ktime_get(), start);
 			filltime = ktime_add(filltime, diff);
@@ -640,6 +663,11 @@  static int dmatest_func(void *data)
 			tx = dev->device_prep_dma_memcpy(chan,
 							 dsts[0] + dst_off,
 							 srcs[0], len, flags);
+		else if (thread->type == DMA_MEMSET)
+			tx = dev->device_prep_dma_memset(chan,
+						dsts[0] + dst_off,
+						*(thread->srcs[0] + src_off),
+						len, flags);
 		else if (thread->type == DMA_SG)
 			tx = dev->device_prep_dma_sg(chan, tx_sg, src_cnt,
 						     rx_sg, src_cnt, flags);
@@ -722,23 +750,25 @@  static int dmatest_func(void *data)
 		start = ktime_get();
 		pr_debug("%s: verifying source buffer...\n", current->comm);
 		error_count = dmatest_verify(thread->srcs, 0, src_off,
-				0, PATTERN_SRC, true);
+				0, PATTERN_SRC, true, is_memset);
 		error_count += dmatest_verify(thread->srcs, src_off,
 				src_off + len, src_off,
-				PATTERN_SRC | PATTERN_COPY, true);
+				PATTERN_SRC | PATTERN_COPY, true, is_memset);
 		error_count += dmatest_verify(thread->srcs, src_off + len,
 				params->buf_size, src_off + len,
-				PATTERN_SRC, true);
+				PATTERN_SRC, true, is_memset);
 
 		pr_debug("%s: verifying dest buffer...\n", current->comm);
 		error_count += dmatest_verify(thread->dsts, 0, dst_off,
-				0, PATTERN_DST, false);
+				0, PATTERN_DST, false, is_memset);
+
 		error_count += dmatest_verify(thread->dsts, dst_off,
 				dst_off + len, src_off,
-				PATTERN_SRC | PATTERN_COPY, false);
+				PATTERN_SRC | PATTERN_COPY, false, is_memset);
+
 		error_count += dmatest_verify(thread->dsts, dst_off + len,
 				params->buf_size, dst_off + len,
-				PATTERN_DST, false);
+				PATTERN_DST, false, is_memset);
 
 		diff = ktime_sub(ktime_get(), start);
 		comparetime = ktime_add(comparetime, diff);
@@ -821,6 +851,8 @@  static int dmatest_add_threads(struct dmatest_info *info,
 
 	if (type == DMA_MEMCPY)
 		op = "copy";
+	else if (type == DMA_MEMSET)
+		op = "set";
 	else if (type == DMA_SG)
 		op = "sg";
 	else if (type == DMA_XOR)
@@ -883,6 +915,13 @@  static int dmatest_add_channel(struct dmatest_info *info,
 		}
 	}
 
+	if (dma_has_cap(DMA_MEMSET, dma_dev->cap_mask)) {
+		if (dmatest == 2) {
+			cnt = dmatest_add_threads(info, dtc, DMA_MEMSET);
+			thread_count += cnt > 0 ? cnt : 0;
+		}
+	}
+
 	if (dma_has_cap(DMA_SG, dma_dev->cap_mask)) {
 		if (dmatest == 1) {
 			cnt = dmatest_add_threads(info, dtc, DMA_SG);
@@ -961,6 +1000,7 @@  static void run_threaded_test(struct dmatest_info *info)
 	params->noverify = noverify;
 
 	request_channels(info, DMA_MEMCPY);
+	request_channels(info, DMA_MEMSET);
 	request_channels(info, DMA_XOR);
 	request_channels(info, DMA_SG);
 	request_channels(info, DMA_PQ);